From: Hans Verkuil hverkuil@xs4all.nl
Add DocBook documentation for the CEC API.
Signed-off-by: Hans Verkuil hansverk@cisco.com [k.debski@samsung.com: add documentation for passthrough mode] [k.debski@samsung.com: minor fixes and change of reserved field sizes] Signed-off-by: Kamil Debski kamil@wypas.org Signed-off-by: Hans Verkuil hans.verkuil@cisco.com --- Documentation/DocBook/media/Makefile | 2 + Documentation/DocBook/media/v4l/biblio.xml | 10 + Documentation/DocBook/media/v4l/cec-api.xml | 75 +++++ Documentation/DocBook/media/v4l/cec-func-close.xml | 59 ++++ Documentation/DocBook/media/v4l/cec-func-ioctl.xml | 73 +++++ Documentation/DocBook/media/v4l/cec-func-open.xml | 94 +++++++ Documentation/DocBook/media/v4l/cec-func-poll.xml | 89 ++++++ .../DocBook/media/v4l/cec-ioc-adap-g-caps.xml | 138 ++++++++++ .../DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml | 306 +++++++++++++++++++++ .../DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml | 78 ++++++ .../DocBook/media/v4l/cec-ioc-adap-g-state.xml | 87 ++++++ .../DocBook/media/v4l/cec-ioc-adap-g-vendor-id.xml | 70 +++++ .../DocBook/media/v4l/cec-ioc-dqevent.xml | 125 +++++++++ .../DocBook/media/v4l/cec-ioc-g-monitor.xml | 86 ++++++ .../DocBook/media/v4l/cec-ioc-g-passthrough.xml | 81 ++++++ .../DocBook/media/v4l/cec-ioc-receive.xml | 185 +++++++++++++ Documentation/DocBook/media_api.tmpl | 8 +- 17 files changed, 1564 insertions(+), 2 deletions(-) create mode 100644 Documentation/DocBook/media/v4l/cec-api.xml create mode 100644 Documentation/DocBook/media/v4l/cec-func-close.xml create mode 100644 Documentation/DocBook/media/v4l/cec-func-ioctl.xml create mode 100644 Documentation/DocBook/media/v4l/cec-func-open.xml create mode 100644 Documentation/DocBook/media/v4l/cec-func-poll.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-caps.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-state.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-vendor-id.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-dqevent.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-g-monitor.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-g-passthrough.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-receive.xml
diff --git a/Documentation/DocBook/media/Makefile b/Documentation/DocBook/media/Makefile index 23996f8..5c89f4b 100644 --- a/Documentation/DocBook/media/Makefile +++ b/Documentation/DocBook/media/Makefile @@ -64,6 +64,7 @@ IOCTLS = \ $(shell perl -ne 'print "$$1 " if /#define\s+([A-Z][^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/net.h) \ $(shell perl -ne 'print "$$1 " if /#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/video.h) \ $(shell perl -ne 'print "$$1 " if /#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/media.h) \ + $(shell perl -ne 'print "$$1 " if /#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/cec.h) \ $(shell perl -ne 'print "$$1 " if /#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/v4l2-subdev.h) \
DEFINES = \ @@ -100,6 +101,7 @@ STRUCTS = \ $(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/ && !/_old/)' $(srctree)/include/uapi/linux/dvb/net.h) \ $(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/uapi/linux/dvb/video.h) \ $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/media.h) \ + $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/cec.h) \ $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-subdev.h) \ $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-mediabus.h)
diff --git a/Documentation/DocBook/media/v4l/biblio.xml b/Documentation/DocBook/media/v4l/biblio.xml index fdee6b3..bed940b 100644 --- a/Documentation/DocBook/media/v4l/biblio.xml +++ b/Documentation/DocBook/media/v4l/biblio.xml @@ -324,6 +324,16 @@ in the frequency range from 87,5 to 108,0 MHz</title> <subtitle>Specification Version 1.4a</subtitle> </biblioentry>
+ <biblioentry id="hdmi2"> + <abbrev>HDMI2</abbrev> + <authorgroup> + <corpauthor>HDMI Licensing LLC +(<ulink url="http://www.hdmi.org">http://www.hdmi.org</ulink>)</corpauthor> + </authorgroup> + <title>High-Definition Multimedia Interface</title> + <subtitle>Specification Version 2.0</subtitle> + </biblioentry> + <biblioentry id="dp"> <abbrev>DP</abbrev> <authorgroup> diff --git a/Documentation/DocBook/media/v4l/cec-api.xml b/Documentation/DocBook/media/v4l/cec-api.xml new file mode 100644 index 0000000..7394116 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-api.xml @@ -0,0 +1,75 @@ +<partinfo> + <authorgroup> + <author> + <firstname>Hans</firstname> + <surname>Verkuil</surname> + <affiliation><address><email>hans.verkuil@cisco.com</email></address></affiliation> + <contrib>Initial version.</contrib> + </author> + </authorgroup> + <copyright> + <year>2015</year> + <holder>Hans Verkuil</holder> + </copyright> + + <revhistory> + <!-- Put document revisions here, newest first. --> + <revision> + <revnumber>1.0.0</revnumber> + <date>2015-04-27</date> + <authorinitials>hv</authorinitials> + <revremark>Initial revision</revremark> + </revision> + </revhistory> +</partinfo> + +<title>CEC API</title> + +<chapter id="cec-api"> + <title>CEC: Consumer Electronics Control</title> + + <section id="cec-intro"> + <title>Introduction</title> + <para>HDMI connectors provide a single pin for use by the Consumer Electronics + Control protocol. This protocol allows different devices connected by an HDMI cable + to communicate. The protocol for CEC version 1.4 is defined in supplements 1 (CEC) + and 2 (HEAC or HDMI Ethernet and Audio Return Channel) of the HDMI 1.4a + (<xref linkend="hdmi" />) specification and the extensions added to CEC version 2.0 + are defined in chapter 11 of the HDMI 2.0 (<xref linkend="hdmi2" />) specification. + </para> + + <para>The bitrate is very slow (effectively no more than 36 bytes per second) and + is based on the ancient AV.link protocol used in old SCART connectors. The protocol + closely resembles a crazy Rube Goldberg contraption and is an unholy mix of low and + high level messages. Some messages, especially those part of the HEAC protocol layered + on top of CEC, need to be handled by the kernel, others can be handled either by the + kernel or by userspace.</para> + + <para>In addition, CEC can be implemented in HDMI receivers, transmitters and in USB + devices that have an HDMI input and an HDMI output and that control just the CEC pin.</para> + + <para>Drivers that support CEC and that allow (or require) userspace to handle CEC + messages and/or configure the CEC adapter will create a CEC device node (/dev/cecX) + to give userspace access to the CEC adapter. The &CEC-ADAP-G-CAPS; ioctl will tell userspace + what it is allowed to do.</para> + </section> +</chapter> + +<appendix id="cec-user-func"> + <title>Function Reference</title> + <!-- Keep this alphabetically sorted. --> + &sub-cec-func-open; + &sub-cec-func-close; + &sub-cec-func-ioctl; + &sub-cec-func-poll; + <!-- All ioctls go here. --> + &sub-cec-ioc-adap-g-caps; + &sub-cec-ioc-adap-g-log-addrs; + &sub-cec-ioc-adap-g-phys-addr; + &sub-cec-ioc-adap-g-state; + &sub-cec-ioc-adap-g-vendor-id; + &sub-cec-ioc-dqevent; + &sub-cec-ioc-g-monitor; + &sub-cec-ioc-g-passthrough; + &sub-cec-ioc-receive; +</appendix> diff --git a/Documentation/DocBook/media/v4l/cec-func-close.xml b/Documentation/DocBook/media/v4l/cec-func-close.xml new file mode 100644 index 0000000..c3978af --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-func-close.xml @@ -0,0 +1,59 @@ +<refentry id="cec-func-close"> + <refmeta> + <refentrytitle>cec close()</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>cec-close</refname> + <refpurpose>Close a cec device</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcsynopsisinfo>#include <unistd.h></funcsynopsisinfo> + <funcprototype> + <funcdef>int <function>close</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para>Closes the cec device. Resources associated with the file descriptor + are freed. The device configuration remain unchanged.</para> + </refsect1> + + <refsect1> + <title>Return Value</title> + + <para><function>close</function> returns 0 on success. On error, -1 is + returned, and <varname>errno</varname> is set appropriately. Possible error + codes are:</para> + + <variablelist> + <varlistentry> + <term><errorcode>EBADF</errorcode></term> + <listitem> + <para><parameter>fd</parameter> is not a valid open file descriptor. + </para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-func-ioctl.xml b/Documentation/DocBook/media/v4l/cec-func-ioctl.xml new file mode 100644 index 0000000..ad85973 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-func-ioctl.xml @@ -0,0 +1,73 @@ +<refentry id="cec-func-ioctl"> + <refmeta> + <refentrytitle>cec ioctl()</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>cec-ioctl</refname> + <refpurpose>Control a cec device</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcsynopsisinfo>#include <sys/ioctl.h></funcsynopsisinfo> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>void *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>&fd;</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>CEC ioctl request code as defined in the cec.h header file, + for example CEC_G_CAPS.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para>Pointer to a request-specific structure.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + <para>The <function>ioctl()</function> function manipulates cec device + parameters. The argument <parameter>fd</parameter> must be an open file + descriptor.</para> + <para>The ioctl <parameter>request</parameter> code specifies the cec + function to be called. It has encoded in it whether the argument is an + input, output or read/write parameter, and the size of the argument + <parameter>argp</parameter> in bytes.</para> + <para>Macros and structures definitions specifying cec ioctl requests and + their parameters are located in the cec.h header file. All cec ioctl + requests, their respective function and parameters are specified in + <xref linkend="cec-user-func" />.</para> + </refsect1> + + <refsect1> + &return-value; + + <para>Request-specific error codes are listed in the + individual requests descriptions.</para> + <para>When an ioctl that takes an output or read/write parameter fails, + the parameter remains unmodified.</para> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-func-open.xml b/Documentation/DocBook/media/v4l/cec-func-open.xml new file mode 100644 index 0000000..d814847 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-func-open.xml @@ -0,0 +1,94 @@ +<refentry id="cec-func-open"> + <refmeta> + <refentrytitle>cec open()</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>cec-open</refname> + <refpurpose>Open a cec device</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcsynopsisinfo>#include <fcntl.h></funcsynopsisinfo> + <funcprototype> + <funcdef>int <function>open</function></funcdef> + <paramdef>const char *<parameter>device_name</parameter></paramdef> + <paramdef>int <parameter>flags</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>device_name</parameter></term> + <listitem> + <para>Device to be opened.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>flags</parameter></term> + <listitem> + <para>Open flags. Access mode must be either <constant>O_RDONLY</constant> + or <constant>O_RDWR</constant>. Other flags have no effect.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + <refsect1> + <title>Description</title> + <para>To open a cec device applications call <function>open()</function> + with the desired device name. The function has no side effects; the device + configuration remain unchanged.</para> + <para>When the device is opened in read-only mode, attempts to modify its + configuration will result in an error, and <varname>errno</varname> will be + set to <errorcode>EBADF</errorcode>.</para> + </refsect1> + <refsect1> + <title>Return Value</title> + + <para><function>open</function> returns the new file descriptor on success. + On error, -1 is returned, and <varname>errno</varname> is set appropriately. + Possible error codes are:</para> + + <variablelist> + <varlistentry> + <term><errorcode>EACCES</errorcode></term> + <listitem> + <para>The requested access to the file is not allowed.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>EMFILE</errorcode></term> + <listitem> + <para>The process already has the maximum number of files open. + </para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>ENFILE</errorcode></term> + <listitem> + <para>The system limit on the total number of open files has been + reached.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>ENOMEM</errorcode></term> + <listitem> + <para>Insufficient kernel memory was available.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>ENXIO</errorcode></term> + <listitem> + <para>No device corresponding to this device special file exists. + </para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-func-poll.xml b/Documentation/DocBook/media/v4l/cec-func-poll.xml new file mode 100644 index 0000000..6853817 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-func-poll.xml @@ -0,0 +1,89 @@ +<refentry id="cec-func-poll"> + <refmeta> + <refentrytitle>cec poll()</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>cec-poll</refname> + <refpurpose>Wait for some event on a file descriptor</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcsynopsisinfo>#include <sys/poll.h></funcsynopsisinfo> + <funcprototype> + <funcdef>int <function>poll</function></funcdef> + <paramdef>struct pollfd *<parameter>ufds</parameter></paramdef> + <paramdef>unsigned int <parameter>nfds</parameter></paramdef> + <paramdef>int <parameter>timeout</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Description</title> + + <para>With the <function>poll()</function> function applications +can wait for CEC events.</para> + + <para>On success <function>poll()</function> returns the number of +file descriptors that have been selected (that is, file descriptors +for which the <structfield>revents</structfield> field of the +respective <structname>pollfd</structname> structure is non-zero). +CEC devices set the <constant>POLLIN</constant> and +<constant>POLLRDNORM</constant> flags in the +<structfield>revents</structfield> field if there are messages in the +receive queue. If the transmit queue has room for new messages, the +<constant>POLLOUT</constant> and <constant>POLLWRNORM</constant> +flags are set. If there are events in the event queue, then the +<constant>POLLPRI</constant> flag is set. +When the function timed out it returns a value of zero, on +failure it returns <returnvalue>-1</returnvalue> and the +<varname>errno</varname> variable is set appropriately. +</para> + + <para>For more details see the +<function>poll()</function> manual page.</para> + </refsect1> + + <refsect1> + <title>Return Value</title> + + <para>On success, <function>poll()</function> returns the number +structures which have non-zero <structfield>revents</structfield> +fields, or zero if the call timed out. On error +<returnvalue>-1</returnvalue> is returned, and the +<varname>errno</varname> variable is set appropriately:</para> + + <variablelist> + <varlistentry> + <term><errorcode>EBADF</errorcode></term> + <listitem> + <para>One or more of the <parameter>ufds</parameter> members +specify an invalid file descriptor.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>EFAULT</errorcode></term> + <listitem> + <para><parameter>ufds</parameter> references an inaccessible +memory area.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>EINTR</errorcode></term> + <listitem> + <para>The call was interrupted by a signal.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><errorcode>EINVAL</errorcode></term> + <listitem> + <para>The <parameter>nfds</parameter> argument is greater +than <constant>OPEN_MAX</constant>.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-ioc-adap-g-caps.xml b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-caps.xml new file mode 100644 index 0000000..db20619 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-caps.xml @@ -0,0 +1,138 @@ +<refentry id="cec-ioc-adap-g-caps"> + <refmeta> + <refentrytitle>ioctl CEC_ADAP_G_CAPS</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>CEC_ADAP_G_CAPS</refname> + <refpurpose>Query device capabilities</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct cec_caps *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>File descriptor returned by + <link linkend='cec-func-open'><function>open()</function></link>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>CEC_ADAP_G_CAPS</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para>All cec devices must support the <constant>CEC_ADAP_G_CAPS</constant> + ioctl. To query device information, applications call the ioctl with a + pointer to a &cec-caps;. The driver fills the structure and returns + the information to the application. + The ioctl never fails.</para> + + <table pgwide="1" frame="none" id="cec-caps"> + <title>struct <structname>cec_caps</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u32</entry> + <entry><structfield>available_log_addrs</structfield></entry> + <entry>How many logical addresses does the CEC adapter support. This will + be at most <constant>CEC_MAX_LOG_ADDRS</constant>.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>capabilities</structfield></entry> + <entry>The capabilities of the CEC adapter, see <xref + linkend="cec-capabilities" />.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>reserved</structfield>[40]</entry> + <entry>Reserved for future extensions. Drivers must + set this array to zero.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="cec-capabilities"> + <title>CEC Capabilities Flags</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_CAP_STATE</constant></entry> + <entry>0x00000001</entry> + <entry>Userspace has to configure the adapter state (enable or disable it) by + calling &CEC-ADAP-S-STATE;.</entry> + </row> + <row> + <entry><constant>CEC_CAP_PHYS_ADDR</constant></entry> + <entry>0x00000002</entry> + <entry>Userspace has to configure the physical address by + calling &CEC-ADAP-S-PHYS-ADDR;.</entry> + </row> + <row> + <entry><constant>CEC_CAP_LOG_ADDRS</constant></entry> + <entry>0x00000004</entry> + <entry>Userspace has to configure the logical addresses by + calling &CEC-ADAP-S-LOG-ADDRS;.</entry> + </row> + <row> + <entry><constant>CEC_CAP_TRANSMIT</constant></entry> + <entry>0x00000008</entry> + <entry>Userspace can transmit messages by calling &CEC-TRANSMIT;.</entry> + </row> + <row> + <entry><constant>CEC_CAP_RECEIVE</constant></entry> + <entry>0x00000010</entry> + <entry>Userspace can receive messages by calling &CEC-RECEIVE;.</entry> + </row> + <row> + <entry><constant>CEC_CAP_VENDOR_ID</constant></entry> + <entry>0x00000020</entry> + <entry>Userspace has to configure the vendor ID by + calling &CEC-ADAP-S-VENDOR-ID;.</entry> + </row> + <row> + <entry><constant>CEC_CAP_PASSTHROUGH</constant></entry> + <entry>0x00000040</entry> + <entry>Userspace can use the passthrough mode by + calling &CEC-G-PASSTHROUGH;.</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml new file mode 100644 index 0000000..4d6575c --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml @@ -0,0 +1,306 @@ +<refentry id="cec-ioc-adap-g-log-addrs"> + <refmeta> + <refentrytitle>ioctl CEC_ADAP_G_LOG_ADDRS, CEC_ADAP_S_LOG_ADDRS</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>CEC_ADAP_G_LOG_ADDRS</refname> + <refname>CEC_ADAP_S_LOG_ADDRS</refname> + <refpurpose>Get or set the logical addresses</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct cec_log_addrs *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>File descriptor returned by + <link linkend='cec-func-open'><function>open()</function></link>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>CEC_ADAP_G_LOG_ADDRS, CEC_ADAP_S_LOG_ADDRS</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para>To query the current CEC logical addresses applications call the +<constant>CEC_ADAP_G_LOG_ADDRS</constant> ioctl with a pointer to a +<structname>cec_log_addrs</structname> structure where the drivers stores the +logical addresses.</para> + + <para>To set new logical addresses applications fill in struct <structname>cec_log_addrs</structname> +and call the <constant>CEC_ADAP_S_LOG_ADDRS</constant> ioctl with a pointer to this struct. +The <constant>CEC_ADAP_S_LOG_ADDRS</constant> ioctl is only available if +<constant>CEC_CAP_LOG_ADDRS</constant> is set. This ioctl will block until all +requested logical addresses have been claimed.</para> + + <table pgwide="1" frame="none" id="cec-log-addrs"> + <title>struct <structname>cec_log_addrs</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u8</entry> + <entry><structfield>cec_version</structfield></entry> + <entry>The CEC version that this adapter shall use. See + <xref linkend="cec-versions" />. + Used to implement the <constant>CEC_MSG_CEC_VERSION</constant> and + <constant>CEC_MSG_REPORT_FEATURES</constant> messages. Note that + <constant>CEC_OP_CEC_VERSION_1_3A</constant> is not allowed + by the CEC framework. + </entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>num_log_addrs</structfield></entry> + <entry>Number of logical addresses to set up. Must be ≤ + <structfield>available_log_addrs</structfield> as returned by + &CEC-ADAP-G-CAPS;. All arrays in this structure are only filled up to + index <structfield>available_log_addrs</structfield>-1. The remaining + array elements will be ignored. Note that the CEC 2.0 standard allows + for a maximum of 2 logical addresses, although some hardware has support + for more. <constant>CEC_MAX_LOG_ADDRS</constant> is 4. The driver will + return the actual number of logical addresses it could claim, which may + be less than what was requested. If this field is set to 0, then the + CEC adapter shall clear all claimed logical addresses and all other + fields will be ignored.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>primary_device_type</structfield>[CEC_MAX_LOG_ADDRS]</entry> + <entry>Primary device type for each logical address. See + <xref linkend="cec-prim-dev-types" /> for possible types.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>log_addr_type</structfield>[CEC_MAX_LOG_ADDRS]</entry> + <entry>Logical address types. See <xref linkend="cec-log-addr-types" /> for + possible types. The driver will update this with the actual logical address + type that it claimed (e.g. it may have to fallback to + <constant>CEC_LOG_ADDR_TYPE_UNREGISTERED</constant>).</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>log_addr</structfield>[CEC_MAX_LOG_ADDRS]</entry> + <entry>The actual logical addresses that were claimed. This is set by the + driver. If no logical address could be claimed, then it is set to + <constant>CEC_LOG_ADDR_INVALID</constant>.</entry> + </row> + <row> + <entry>char</entry> + <entry><structfield>osd_name</structfield>[15]</entry> + <entry>The actual logical addresses that were claimed. This is set by the + driver. If no logical address could be claimed, then it is set to + <constant>CEC_LOG_ADDR_INVALID</constant>.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>all_device_types</structfield>[CEC_MAX_LOG_ADDRS]</entry> + <entry>CEC 2.0 specific: all device types. See <xref linkend="cec-all-dev-types-flags" />. + Used to implement the <constant>CEC_MSG_REPORT_FEATURES</constant> message. + This field is ignored if <structfield>cec_version</structfield> < + <constant>CEC_OP_CEC_VERSION_2_0</constant>.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>features</structfield>[CEC_MAX_LOG_ADDRS][12]</entry> + <entry>Features for each logical address. Used to implement the + <constant>CEC_MSG_REPORT_FEATURES</constant> message. The 12 bytes include + both the RC Profile and the Device Features. + This field is ignored if <structfield>cec_version</structfield> < + <constant>CEC_OP_CEC_VERSION_2_0</constant>.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>reserved</structfield>[63]</entry> + <entry>Reserved for future extensions. Drivers and applications must + set this array to zero.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="cec-versions"> + <title>CEC Versions</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_OP_CEC_VERSION_1_3A</constant></entry> + <entry>4</entry> + <entry>CEC version according to the HDMI 1.3a standard.</entry> + </row> + <row> + <entry><constant>CEC_OP_CEC_VERSION_1_4B</constant></entry> + <entry>5</entry> + <entry>CEC version according to the HDMI 1.4b standard.</entry> + </row> + <row> + <entry><constant>CEC_OP_CEC_VERSION_2_0</constant></entry> + <entry>6</entry> + <entry>CEC version according to the HDMI 2.0 standard.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="cec-prim-dev-types"> + <title>CEC Primary Device Types</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_OP_PRIM_DEVTYPE_TV</constant></entry> + <entry>0</entry> + <entry>Use for a TV.</entry> + </row> + <row> + <entry><constant>CEC_OP_PRIM_DEVTYPE_RECORD</constant></entry> + <entry>1</entry> + <entry>Use for a recording device.</entry> + </row> + <row> + <entry><constant>CEC_OP_PRIM_DEVTYPE_TUNER</constant></entry> + <entry>3</entry> + <entry>Use for a device with a tuner.</entry> + </row> + <row> + <entry><constant>CEC_OP_PRIM_DEVTYPE_PLAYBACK</constant></entry> + <entry>4</entry> + <entry>Use for a playback device.</entry> + </row> + <row> + <entry><constant>CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM</constant></entry> + <entry>5</entry> + <entry>Use for an audio system (e.g. an audio/video receiver).</entry> + </row> + <row> + <entry><constant>CEC_OP_PRIM_DEVTYPE_SWITCH</constant></entry> + <entry>6</entry> + <entry>Use for a CEC switch.</entry> + </row> + <row> + <entry><constant>CEC_OP_PRIM_DEVTYPE_VIDEOPROC</constant></entry> + <entry>7</entry> + <entry>Use for a video processor device.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="cec-log-addr-types"> + <title>CEC Logical Address Types</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_LOG_ADDR_TYPE_TV</constant></entry> + <entry>0</entry> + <entry>Use for a TV.</entry> + </row> + <row> + <entry><constant>CEC_LOG_ADDR_TYPE_RECORD</constant></entry> + <entry>1</entry> + <entry>Use for a recording device.</entry> + </row> + <row> + <entry><constant>CEC_LOG_ADDR_TYPE_TUNER</constant></entry> + <entry>2</entry> + <entry>Use for a tuner device.</entry> + </row> + <row> + <entry><constant>CEC_LOG_ADDR_TYPE_PLAYBACK</constant></entry> + <entry>3</entry> + <entry>Use for a playback device.</entry> + </row> + <row> + <entry><constant>CEC_LOG_ADDR_TYPE_AUDIOSYSTEM</constant></entry> + <entry>4</entry> + <entry>Use for an audio system device.</entry> + </row> + <row> + <entry><constant>CEC_LOG_ADDR_TYPE_SPECIFIC</constant></entry> + <entry>5</entry> + <entry>Use for a second TV or for a video processor device.</entry> + </row> + <row> + <entry><constant>CEC_LOG_ADDR_TYPE_UNREGISTERED</constant></entry> + <entry>6</entry> + <entry>Fallback if all relevant logical addresses are claimed, or for + pure CEC switches or CDC-only devices (CDC: Capability Discovery and Control).</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="cec-all-dev-types-flags"> + <title>CEC All Device Types Flags</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_OP_ALL_DEVTYPE_TV</constant></entry> + <entry>0x80</entry> + <entry>This supports the TV type.</entry> + </row> + <row> + <entry><constant>CEC_OP_ALL_DEVTYPE_RECORD</constant></entry> + <entry>0x40</entry> + <entry>This supports the Recording type.</entry> + </row> + <row> + <entry><constant>CEC_OP_ALL_DEVTYPE_TUNER</constant></entry> + <entry>0x20</entry> + <entry>This supports the Tuner type.</entry> + </row> + <row> + <entry><constant>CEC_OP_ALL_DEVTYPE_PLAYBACK</constant></entry> + <entry>0x10</entry> + <entry>This supports the Playback type.</entry> + </row> + <row> + <entry><constant>CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM</constant></entry> + <entry>0x08</entry> + <entry>This supports the Audio System type.</entry> + </row> + <row> + <entry><constant>CEC_OP_ALL_DEVTYPE_SWITCH</constant></entry> + <entry>0x04</entry> + <entry>This supports the CEC Switch or Video Processing type.</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml new file mode 100644 index 0000000..4d2827c --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml @@ -0,0 +1,78 @@ +<refentry id="cec-ioc-adap-g-phys-addr"> + <refmeta> + <refentrytitle>ioctl CEC_ADAP_G_PHYS_ADDR, CEC_ADAP_S_PHYS_ADDR</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>CEC_ADAP_G_PHYS_ADDR</refname> + <refname>CEC_ADAP_S_PHYS_ADDR</refname> + <refpurpose>Get or set the physical address</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>__u16 *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>File descriptor returned by + <link linkend='cec-func-open'><function>open()</function></link>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>CEC_ADAP_G_PHYS_ADDR, CEC_ADAP_S_PHYS_ADDR</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para>To query the current physical address applications call the +<constant>CEC_ADAP_G_PHYS_ADDR</constant> ioctl with a pointer to an __u16 +where the driver stores the physical address.</para> + + <para>To set a new physical address applications store the physical address in +an __u16 and call the <constant>CEC_ADAP_S_PHYS_ADDR</constant> ioctl with a +pointer to this integer. <constant>CEC_ADAP_S_PHYS_ADDR</constant> is only +available if <constant>CEC_CAP_PHYS_ADDR</constant> is set.</para> + + <para>The physical address is a 16-bit number where each group of 4 bits +represent a digit of the physical address a.b.c.d where the most significant +4 bits represent 'a'. The CEC root device (usually the TV) has address 0.0.0.0. +Every device that is hooked up to an input of the TV has address a.0.0.0 (where +'a' is ≥ 1), devices hooked up to those in turn have addresses a.b.0.0, etc. +So a topology of up to 5 devices deep is supported. The physical address a +device shall use is stored in the EDID of the sink.</para> + +<para>For example, the EDID for each HDMI input of the TV will have a different +physical address of the form a.0.0.0 that the sources will read out and use as +their physical address.</para> + </refsect1> + + <refsect1> + &return-value; + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-ioc-adap-g-state.xml b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-state.xml new file mode 100644 index 0000000..19d1d45 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-state.xml @@ -0,0 +1,87 @@ +<refentry id="cec-ioc-adap-g-state"> + <refmeta> + <refentrytitle>ioctl CEC_ADAP_G_STATE, CEC_ADAP_S_STATE</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>CEC_ADAP_G_STATE</refname> + <refname>CEC_ADAP_S_STATE</refname> + <refpurpose>Get or set the adapter state</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>__u32 *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>File descriptor returned by + <link linkend='cec-func-open'><function>open()</function></link>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>CEC_ADAP_G_STATE, CEC_ADAP_S_STATE</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para>To query the current adapter state applications call the +<constant>CEC_ADAP_G_STATE</constant> ioctl with a pointer to an __u32 +where the driver stores the state.</para> + + <para>To set the adapter state applications store the CEC adapter state +in an __u32 and call the <constant>CEC_ADAP_S_STATE</constant> ioctl with a +pointer to this integer. <constant>CEC_ADAP_S_STATE</constant> is only +available if <constant>CEC_CAP_STATE</constant> is set.</para> + + <para>Available states are:</para> + + <table pgwide="1" frame="none" id="cec-adap-states"> + <title>Adapter States</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_ADAP_DISABLED</constant></entry> + <entry>0</entry> + <entry>The adapter is disabled.</entry> + </row> + <row> + <entry><constant>CEC_ADAP_ENABLED</constant></entry> + <entry>1</entry> + <entry>The adapter is enabled.</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-ioc-adap-g-vendor-id.xml b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-vendor-id.xml new file mode 100644 index 0000000..0bf7731 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-vendor-id.xml @@ -0,0 +1,70 @@ +<refentry id="cec-ioc-adap-g-vendor-id"> + <refmeta> + <refentrytitle>ioctl CEC_ADAP_G_VENDOR_ID, CEC_ADAP_S_VENDOR_ID</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>CEC_ADAP_G_VENDOR_ID</refname> + <refname>CEC_ADAP_S_VENDOR_ID</refname> + <refpurpose>Get or set adapter vendor ID</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>__u32 *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>File descriptor returned by + <link linkend='cec-func-open'><function>open()</function></link>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>CEC_ADAP_G_VENDOR_ID, CEC_ADAP_S_VENDOR_ID</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para>To query the current CEC adapter vendor ID applications call the +<constant>CEC_ADAP_G_VENDOR_ID</constant> ioctl with a pointer to an __u32 +where the driver stores the vendor ID.</para> + + <para>To set a new CEC adapter vendor ID applications store the vendor ID in +an __u32 and call the <constant>CEC_ADAP_S_VENDOR_ID</constant> ioctl with a +pointer to this integer. <constant>CEC_ADAP_S_VENDOR_ID</constant> is only +available if <constant>CEC_CAP_VENDOR_ID</constant> is set.</para> + + <para>The vendor ID is a 24-bit number that identifies the specific +vendor or entity. Based on this ID vendor specific commands may be +defined.</para> + </refsect1> + + <refsect1> + &return-value; + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-ioc-dqevent.xml b/Documentation/DocBook/media/v4l/cec-ioc-dqevent.xml new file mode 100644 index 0000000..cbde320 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-dqevent.xml @@ -0,0 +1,125 @@ +<refentry id="cec-ioc-g-event"> + <refmeta> + <refentrytitle>ioctl CEC_G_EVENT</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>CEC_G_EVENT</refname> + <refpurpose>Get a CEC event</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct cec_event *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>File descriptor returned by + <link linkend='cec-func-open'><function>open()</function></link>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>CEC_G_EVENT</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para>CEC devices can send asynchronous events. These can be retrieved by calling + the <constant>CEC_G_EVENT</constant> ioctl. If the file descriptor is in non-blocking + mode and no event is pending, then it will return -1 and set errno to the &EAGAIN;.</para> + + <para>There can be up to 40 events queued up. If more events are added, then the oldest event will be discarded.</para> + + <table pgwide="1" frame="none" id="cec-event"> + <title>struct <structname>cec_event</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u64</entry> + <entry><structfield>ts</structfield></entry> + <entry>Timestamp of the event in ns.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>event</structfield></entry> + <entry>The event, see <xref linkend="cec-events" />.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>sequence</structfield></entry> + <entry>For the <constant>CEC_EVENT_GOT_REPLY</constant> event this + holds the sequence number of message that requested the reply. + </entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>reserved</structfield>[8]</entry> + <entry>Reserved for future extensions. Drivers must + set this array to zero.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="cec-events"> + <title>CEC Events</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_EVENT_CONNECT</constant></entry> + <entry>1</entry> + <entry>Generated when the HDMI cable is connected.</entry> + </row> + <row> + <entry><constant>CEC_EVENT_READY</constant></entry> + <entry>2</entry> + <entry>Generated when all logical addresses are claimed.</entry> + </row> + <row> + <entry><constant>CEC_EVENT_DISCONNECT</constant></entry> + <entry>3</entry> + <entry>Generated when the HDMI cable is disconnected.</entry> + </row> + <row> + <entry><constant>CEC_EVENT_GOT_REPLY</constant></entry> + <entry>4</entry> + <entry>Generated when a reply is received for a previously sent + message. Generated only if a reply was requested and only if the + message was sent in non-blocking mode.</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-ioc-g-monitor.xml b/Documentation/DocBook/media/v4l/cec-ioc-g-monitor.xml new file mode 100644 index 0000000..6883003 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-g-monitor.xml @@ -0,0 +1,86 @@ +<refentry id="cec-ioc-g-monitor"> + <refmeta> + <refentrytitle>ioctl CEC_G_MONITOR, CEC_S_MONITOR</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>CEC_G_MONITOR</refname> + <refname>CEC_S_MONITOR</refname> + <refpurpose>Get or set the monitor mode</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>__u32 *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>File descriptor returned by + <link linkend='cec-func-open'><function>open()</function></link>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>CEC_G_MONITOR, CEC_S_MONITOR</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para>To query the current state of the monitor mode of the current file + descriptor applications call the <constant>CEC_G_MONITOR</constant> ioctl + with a pointer to an __u32 where the driver stores the state.</para> + + <para>To set the state of the monitor mode of the current file descriptor + applications store the monitor mode state in an __u32 and call the + <constant>CEC_S_MONITOR</constant> ioctl with a pointer to this integer.</para> + + <para>Available states are:</para> + + <table pgwide="1" frame="none" id="cec-monitor-states"> + <title>Monitor States</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_MONITOR_DISABLED</constant></entry> + <entry>0</entry> + <entry>The monitor mode is disabled.</entry> + </row> + <row> + <entry><constant>CEC_MONITOR_ENABLED</constant></entry> + <entry>1</entry> + <entry>The monitor mode is enabled.</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-ioc-g-passthrough.xml b/Documentation/DocBook/media/v4l/cec-ioc-g-passthrough.xml new file mode 100644 index 0000000..127d65e --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-g-passthrough.xml @@ -0,0 +1,81 @@ +<refentry id="cec-ioc-g-passthrough"> + <refmeta> + <refentrytitle>ioctl CEC_G_PASSTHROUGH</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>CEC_G_PASSTHROUGH</refname> + <refpurpose>Get the passthrough mode</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>__u32 *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>File descriptor returned by + <link linkend='cec-func-open'><function>open()</function></link>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>CEC_G_PASSTHROUGH</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para>To query the current state of the passthrough mode of the current file + descriptor the applications call the <constant>CEC_G_PASSTHROUGH</constant> ioctl + with a pointer to an __u32 where the driver stores the state.</para> + + <para>Available states are:</para> + + <table pgwide="1" frame="none" id="cec-passthrough-states"> + <title>Passthrough States</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_PASSTHROUGH_DISABLED</constant></entry> + <entry>0</entry> + <entry>The passthrough mode is disabled.</entry> + </row> + <row> + <entry><constant>CEC_PASSTHROUGH_ENABLED</constant></entry> + <entry>1</entry> + <entry>The passthrough is enabled.</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media/v4l/cec-ioc-receive.xml b/Documentation/DocBook/media/v4l/cec-ioc-receive.xml new file mode 100644 index 0000000..4b793df --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-receive.xml @@ -0,0 +1,185 @@ +<refentry id="cec-ioc-receive"> + <refmeta> + <refentrytitle>ioctl CEC_RECEIVE, CEC_TRANSMIT</refentrytitle> + &manvol; + </refmeta> + + <refnamediv> + <refname>CEC_RECEIVE</refname> + <refname>CEC_TRANSMIT</refname> + <refpurpose>Receive or transmit a CEC message</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <funcsynopsis> + <funcprototype> + <funcdef>int <function>ioctl</function></funcdef> + <paramdef>int <parameter>fd</parameter></paramdef> + <paramdef>int <parameter>request</parameter></paramdef> + <paramdef>struct cec_msg *<parameter>argp</parameter></paramdef> + </funcprototype> + </funcsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Arguments</title> + + <variablelist> + <varlistentry> + <term><parameter>fd</parameter></term> + <listitem> + <para>File descriptor returned by + <link linkend='cec-func-open'><function>open()</function></link>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>request</parameter></term> + <listitem> + <para>CEC_RECEIVE, CEC_TRANSMIT</para> + </listitem> + </varlistentry> + <varlistentry> + <term><parameter>argp</parameter></term> + <listitem> + <para></para> + </listitem> + </varlistentry> + </variablelist> + </refsect1> + + <refsect1> + <title>Description</title> + + <para>To receive a CEC message the application has to fill in the + <structname>cec_msg</structname> structure and pass it to the + <constant>CEC_RECEIVE</constant> ioctl. <constant>CEC_RECEIVE</constant> is + only available if <constant>CEC_CAP_RECEIVE</constant> is set. If the + file descriptor is in non-blocking mode and there are no received + messages pending, then it will return -1 and set errno to the &EAGAIN;. + If the file descriptor is in blocking mode and <structfield>timeout</structfield> + is non-zero and no message arrived within <structfield>timeout</structfield> + milliseconds, then it will return -1 and set errno to the &ETIMEDOUT;.</para> + + <para>To send a CEC message the application has to fill in the + <structname>cec_msg</structname> structure and pass it to the + <constant>CEC_TRANSMIT</constant> ioctl. <constant>CEC_TRANSMIT</constant> is + only available if <constant>CEC_CAP_TRANSMIT</constant> is set. + If there is no more room in the transmit queue, then it will return + -1 and set errno to the &EBUSY;.</para> + + <table pgwide="1" frame="none" id="cec-msg"> + <title>struct <structname>cec_msg</structname></title> + <tgroup cols="3"> + &cs-str; + <tbody valign="top"> + <row> + <entry>__u64</entry> + <entry><structfield>ts</structfield></entry> + <entry>Timestamp of when the message was transmitted in ns in the case + of <constant>CEC_TRANSMIT</constant> with <structfield>reply</structfield> + set to 0, or the timestamp of the received message in all other cases.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>len</structfield></entry> + <entry>The length of the message. For <constant>CEC_TRANSMIT</constant> this + is filled in by the application. The driver will fill this in for + <constant>CEC_RECEIVE</constant> and for <constant>CEC_TRANSMIT</constant> + it will be filled in with the length of the reply message if + <structfield>reply</structfield> was set.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>status</structfield></entry> + <entry>The status of the message. When used with <constant>CEC_RECEIVE</constant> + this is always set to <constant>CEC_RX_STATUS_READY</constant>. When + used with <constant>CEC_TRANSMIT</constant> see <xref linkend="cec-tx-status" /> + for the possible status values.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>timeout</structfield></entry> + <entry>The timeout in milliseconds. This is the time we wait for a message to + be received. If it is set to 0, then we wait indefinitely. + It is ignored by <constant>CEC_TRANSMIT</constant>.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>msg</structfield>[16]</entry> + <entry>The message payload. For <constant>CEC_TRANSMIT</constant> this + is filled in by the application. The driver will fill this in for + <constant>CEC_RECEIVE</constant> and for <constant>CEC_TRANSMIT</constant> + it will be filled in with the payload of the reply message if + <structfield>reply</structfield> was set.</entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>reply</structfield></entry> + <entry>Wait until this message is replied. If <structfield>reply</structfield> + is 0, then don't wait for a reply but return after transmitting the + message. If there was an error as indicated by a non-zero <structfield>status</structfield> + field, then <structfield>reply</structfield> is set to 0 by the driver. + Ignored by <constant>CEC_RECEIVE</constant>.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>sequence</structfield></entry> + <entry>The sequence number is automatically assigned by the CEC + framework for all transmitted messages. It can be later used by the + framework to generate an event if a reply for a message was + requested and the message was transmitted in a non-blocking mode. + </entry> + </row> + <row> + <entry>__u8</entry> + <entry><structfield>reserved</structfield>[35]</entry> + <entry>Reserved for future extensions. Drivers and applications must + set this array to zero.</entry> + </row> + </tbody> + </tgroup> + </table> + + <table pgwide="1" frame="none" id="cec-tx-status"> + <title>CEC Transmit Status</title> + <tgroup cols="3"> + &cs-def; + <tbody valign="top"> + <row> + <entry><constant>CEC_TX_STATUS_OK</constant></entry> + <entry>0x00</entry> + <entry>The message was transmitted successfully.</entry> + </row> + <row> + <entry><constant>CEC_TX_STATUS_ARB_LOST</constant></entry> + <entry>0x01</entry> + <entry>CEC line arbitration was lost.</entry> + </row> + <row> + <entry><constant>CEC_TX_STATUS_RETRY_TIMEOUT</constant></entry> + <entry>0x02</entry> + <entry>The transmit timed out. The timeout period is 200 ms for a polling + message and 1 second for other messages as specified by the CEC protocol.</entry> + </row> + <row> + <entry><constant>CEC_TX_STATUS_FEATURE_ABORT</constant></entry> + <entry>0x04</entry> + <entry>The message was transmitted successfully but the reply was + <constant>CEC_MSG_FEATURE_ABORT</constant>.</entry> + </row> + <row> + <entry><constant>CEC_TX_STATUS_REPLY_TIMEOUT</constant></entry> + <entry>0x08</entry> + <entry>The message was transmitted successfully but the reply was never + received within the 1 second timeout period (this timeout value is + specified by the CEC protocol).</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + &return-value; + </refsect1> +</refentry> diff --git a/Documentation/DocBook/media_api.tmpl b/Documentation/DocBook/media_api.tmpl index f3f5fe5..3f76d41 100644 --- a/Documentation/DocBook/media_api.tmpl +++ b/Documentation/DocBook/media_api.tmpl @@ -38,7 +38,7 @@ <title>LINUX MEDIA INFRASTRUCTURE API</title>
<copyright> - <year>2009-2014</year> + <year>2009-2015</year> <holder>LinuxTV Developers</holder> </copyright>
@@ -75,7 +75,7 @@ </mediaobject> </figure> <para>The media infrastructure API was designed to control such - devices. It is divided into four parts.</para> + devices. It is divided into five parts.</para> <para>The first part covers radio, video capture and output, cameras, analog TV devices and codecs.</para> <para>The second part covers the @@ -87,6 +87,7 @@ <xref linkend="fe-delivery-system-t" />.</para> <para>The third part covers the Remote Controller API.</para> <para>The fourth part covers the Media Controller API.</para> + <para>The fifth part covers the CEC (Consumer Electronics Control) API.</para> <para>It should also be noted that a media device may also have audio components, like mixers, PCM capture, PCM playback, etc, which are controlled via ALSA API.</para> @@ -107,6 +108,9 @@ <part id="media_common"> &sub-media-controller; </part> +<part id="cec"> +&sub-cec-api; +</part>
<chapter id="gen_errors"> &sub-gen-errors;