Den 03.02.2017 10.59, skrev Maxime Ripard:
Signed-off-by: Maxime Ripard maxime.ripard@free-electrons.com
drivers/gpu/drm/panel/Kconfig | 4 +- drivers/gpu/drm/panel/Makefile | 1 +- drivers/gpu/drm/panel/panel-sitronix-st7789v.c | 435 ++++++++++++++++++- 3 files changed, 440 insertions(+), 0 deletions(-) create mode 100644 drivers/gpu/drm/panel/panel-sitronix-st7789v.c
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 62aba976e744..d07b996a07b8 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -81,4 +81,8 @@ config DRM_PANEL_SHARP_LS043T1LE01 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
+config DRM_PANEL_SITRONIX_ST7789V
- tristate "Sitronx ST7789V panel"
- depends on OF && SPI
- endmenu
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index a5c7ec0236e0..41b245d39984 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o +obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c new file mode 100644 index 000000000000..aab817b55aa6 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c @@ -0,0 +1,435 @@ +/*
- Copyright (C) 2017 Free Electrons
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License version
- 2 as published by the Free Software Foundation.
- */
+#include <drm/drmP.h> +#include <drm/drm_panel.h>
+#include <linux/gpio/consumer.h> +#include <linux/spi/spi.h>
+#define ST7789V_SLPIN_CMD 0x10
+#define ST7789V_SLPOUT_CMD 0x11
+#define ST7789V_INVON_CMD 0x21
+#define ST7789V_DISPOFF_CMD 0x28
+#define ST7789V_DISPON_CMD 0x29
+#define ST7789V_MADCTL_CMD 0x36
+#define ST7789V_COLMOD_CMD 0x3a
You can use these from include/video/mipi_display.h:
MIPI_DCS_ENTER_SLEEP_MODE = 0x10, MIPI_DCS_EXIT_SLEEP_MODE = 0x11, MIPI_DCS_ENTER_INVERT_MODE = 0x21, MIPI_DCS_SET_DISPLAY_OFF = 0x28, MIPI_DCS_SET_DISPLAY_ON = 0x29, MIPI_DCS_SET_ADDRESS_MODE = 0x36, MIPI_DCS_SET_PIXEL_FORMAT = 0x3A,
Noralf.
+#define ST7789V_COLMOD_RGB_FMT_18BITS (6 << 4) +#define ST7789V_COLMOD_CTRL_FMT_18BITS (6 << 0)
+#define ST7789V_RAMCTRL_CMD 0xb0 +#define ST7789V_RAMCTRL_RM_RGB BIT(4) +#define ST7789V_RAMCTRL_DM_RGB BIT(0) +#define ST7789V_RAMCTRL_MAGIC (3 << 6) +#define ST7789V_RAMCTRL_EPF(n) (((n) & 3) << 4)
+#define ST7789V_RGBCTRL_CMD 0xb1 +#define ST7789V_RGBCTRL_WO BIT(7) +#define ST7789V_RGBCTRL_RCM(n) (((n) & 3) << 5) +#define ST7789V_RGBCTRL_VSYNC_HIGH BIT(3) +#define ST7789V_RGBCTRL_HSYNC_HIGH BIT(2) +#define ST7789V_RGBCTRL_PCLK_HIGH BIT(1) +#define ST7789V_RGBCTRL_VBP(n) ((n) & 0x7f) +#define ST7789V_RGBCTRL_HBP(n) ((n) & 0x1f)
+#define ST7789V_PORCTRL_CMD 0xb2 +#define ST7789V_PORCTRL_IDLE_BP(n) (((n) & 0xf) << 4) +#define ST7789V_PORCTRL_IDLE_FP(n) ((n) & 0xf) +#define ST7789V_PORCTRL_PARTIAL_BP(n) (((n) & 0xf) << 4) +#define ST7789V_PORCTRL_PARTIAL_FP(n) ((n) & 0xf)
+#define ST7789V_GCTRL_CMD 0xb7 +#define ST7789V_GCTRL_VGHS(n) (((n) & 7) << 4) +#define ST7789V_GCTRL_VGLS(n) ((n) & 7)
+#define ST7789V_VCOMS_CMD 0xbb
+#define ST7789V_LCMCTRL_CMD 0xc0 +#define ST7789V_LCMCTRL_XBGR BIT(5) +#define ST7789V_LCMCTRL_XMX BIT(3) +#define ST7789V_LCMCTRL_XMH BIT(2)
+#define ST7789V_VDVVRHEN_CMD 0xc2 +#define ST7789V_VDVVRHEN_CMDEN BIT(0)
+#define ST7789V_VRHS_CMD 0xc3
+#define ST7789V_VDVS_CMD 0xc4
+#define ST7789V_FRCTRL2_CMD 0xc6
+#define ST7789V_PWCTRL1_CMD 0xd0 +#define ST7789V_PWCTRL1_MAGIC 0xa4 +#define ST7789V_PWCTRL1_AVDD(n) (((n) & 3) << 6) +#define ST7789V_PWCTRL1_AVCL(n) (((n) & 3) << 4) +#define ST7789V_PWCTRL1_VDS(n) ((n) & 3)
+#define ST7789V_PVGAMCTRL_CMD 0xe0 +#define ST7789V_PVGAMCTRL_JP0(n) (((n) & 3) << 4) +#define ST7789V_PVGAMCTRL_JP1(n) (((n) & 3) << 4) +#define ST7789V_PVGAMCTRL_VP0(n) ((n) & 0xf) +#define ST7789V_PVGAMCTRL_VP1(n) ((n) & 0x3f) +#define ST7789V_PVGAMCTRL_VP2(n) ((n) & 0x3f) +#define ST7789V_PVGAMCTRL_VP4(n) ((n) & 0x1f) +#define ST7789V_PVGAMCTRL_VP6(n) ((n) & 0x1f) +#define ST7789V_PVGAMCTRL_VP13(n) ((n) & 0xf) +#define ST7789V_PVGAMCTRL_VP20(n) ((n) & 0x7f) +#define ST7789V_PVGAMCTRL_VP27(n) ((n) & 7) +#define ST7789V_PVGAMCTRL_VP36(n) (((n) & 7) << 4) +#define ST7789V_PVGAMCTRL_VP43(n) ((n) & 0x7f) +#define ST7789V_PVGAMCTRL_VP50(n) ((n) & 0xf) +#define ST7789V_PVGAMCTRL_VP57(n) ((n) & 0x1f) +#define ST7789V_PVGAMCTRL_VP59(n) ((n) & 0x1f) +#define ST7789V_PVGAMCTRL_VP61(n) ((n) & 0x3f) +#define ST7789V_PVGAMCTRL_VP62(n) ((n) & 0x3f) +#define ST7789V_PVGAMCTRL_VP63(n) (((n) & 0xf) << 4)
+#define ST7789V_NVGAMCTRL_CMD 0xe1 +#define ST7789V_NVGAMCTRL_JN0(n) (((n) & 3) << 4) +#define ST7789V_NVGAMCTRL_JN1(n) (((n) & 3) << 4) +#define ST7789V_NVGAMCTRL_VN0(n) ((n) & 0xf) +#define ST7789V_NVGAMCTRL_VN1(n) ((n) & 0x3f) +#define ST7789V_NVGAMCTRL_VN2(n) ((n) & 0x3f) +#define ST7789V_NVGAMCTRL_VN4(n) ((n) & 0x1f) +#define ST7789V_NVGAMCTRL_VN6(n) ((n) & 0x1f) +#define ST7789V_NVGAMCTRL_VN13(n) ((n) & 0xf) +#define ST7789V_NVGAMCTRL_VN20(n) ((n) & 0x7f) +#define ST7789V_NVGAMCTRL_VN27(n) ((n) & 7) +#define ST7789V_NVGAMCTRL_VN36(n) (((n) & 7) << 4) +#define ST7789V_NVGAMCTRL_VN43(n) ((n) & 0x7f) +#define ST7789V_NVGAMCTRL_VN50(n) ((n) & 0xf) +#define ST7789V_NVGAMCTRL_VN57(n) ((n) & 0x1f) +#define ST7789V_NVGAMCTRL_VN59(n) ((n) & 0x1f) +#define ST7789V_NVGAMCTRL_VN61(n) ((n) & 0x3f) +#define ST7789V_NVGAMCTRL_VN62(n) ((n) & 0x3f) +#define ST7789V_NVGAMCTRL_VN63(n) (((n) & 0xf) << 4)
+struct st7789v {
- struct drm_panel panel;
- struct spi_device *spi;
- struct gpio_desc *reset;
- struct backlight_device *backlight;
+};
+enum st7789v_prefix {
- ST7789V_COMMAND = 0,
- ST7789V_DATA = 1,
+};
+static inline struct st7789v *panel_to_st7789v(struct drm_panel *panel) +{
- return container_of(panel, struct st7789v, panel);
+}
+static int st7789v_spi_write(struct st7789v *ctx, u8 prefix, u8 data) +{
- struct spi_transfer xfer = { };
- struct spi_message msg;
- u16 txbuf = ((prefix & 1) << 8) | data;
- spi_message_init(&msg);
- xfer.tx_buf = &txbuf;
- xfer.bits_per_word = 9;
- xfer.len = sizeof(txbuf);
- spi_message_add_tail(&xfer, &msg);
- return spi_sync(ctx->spi, &msg);
+}
+static int st7789v_write_command(struct st7789v *ctx, u8 cmd) +{
- return st7789v_spi_write(ctx, ST7789V_COMMAND, cmd);
+}
+static int st7789v_write_data(struct st7789v *ctx, u8 cmd) +{
- return st7789v_spi_write(ctx, ST7789V_DATA, cmd);
+}
+static int st7789v_write_command_data(struct st7789v *ctx, u8 cmd,
unsigned long n_data, ...)
+{
- va_list ap;
- int i;
- st7789v_write_command(ctx, cmd);
- va_start(ap, n_data);
- for (i = 0; i < n_data; i++)
st7789v_write_data(ctx, va_arg(ap, int));
- va_end(ap);
- return 0;
+}
+static const struct drm_display_mode default_mode = {
- .clock = 7000,
- .hdisplay = 240,
- .hsync_start = 240 + 38,
- .hsync_end = 240 + 38 + 10,
- .htotal = 240 + 38 + 10 + 10,
- .vdisplay = 320,
- .vsync_start = 320 + 8,
- .vsync_end = 320 + 8 + 4,
- .vtotal = 320 + 8 + 4 + 4,
- .vrefresh = 60,
+};
+static int st7789v_get_modes(struct drm_panel *panel) +{
- struct drm_connector *connector = panel->connector;
- struct drm_display_mode *mode;
- mode = drm_mode_duplicate(panel->drm, &default_mode);
- if (!mode) {
dev_err(panel->drm->dev, "failed to add mode %ux%ux@%u\n",
default_mode.hdisplay, default_mode.vdisplay,
default_mode.vrefresh);
return -ENOMEM;
- }
- drm_mode_set_name(mode);
- mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
- drm_mode_probed_add(connector, mode);
- panel->connector->display_info.width_mm = 61;
- panel->connector->display_info.height_mm = 103;
- return 1;
+}
+#define NUMARGS(...) (sizeof((int[]){__VA_ARGS__}) / sizeof(int)) +#define st7789v_send(ctx, cmd, ...) \
- st7789v_write_command_data(ctx, cmd, NUMARGS(__VA_ARGS__), \
##__VA_ARGS__)
+static int st7789v_prepare(struct drm_panel *panel) +{
- struct st7789v *ctx = panel_to_st7789v(panel);
- gpiod_set_value(ctx->reset, 1);
- msleep(30);
- gpiod_set_value(ctx->reset, 0);
- msleep(120);
- st7789v_send(ctx, ST7789V_SLPOUT_CMD);
- /* We need to wait 120ms after a sleep out command */
- msleep(120);
- st7789v_send(ctx, ST7789V_MADCTL_CMD, 0);
- st7789v_send(ctx, ST7789V_COLMOD_CMD,
ST7789V_COLMOD_CTRL_FMT_18BITS |
ST7789V_COLMOD_RGB_FMT_18BITS);
- st7789v_send(ctx, ST7789V_PORCTRL_CMD,
0xc, /* Backporch, normal mode*/
0xc, /* Frontporch, normal mode */
0, /* Disable separate porch control */
ST7789V_PORCTRL_IDLE_BP(3) |
ST7789V_PORCTRL_IDLE_FP(3),
ST7789V_PORCTRL_PARTIAL_BP(3) |
ST7789V_PORCTRL_PARTIAL_FP(3));
- st7789v_send(ctx, ST7789V_GCTRL_CMD,
ST7789V_GCTRL_VGLS(5) | ST7789V_GCTRL_VGHS(3));
- st7789v_send(ctx, ST7789V_VCOMS_CMD, 0x2b);
- st7789v_send(ctx, ST7789V_LCMCTRL_CMD, ST7789V_LCMCTRL_XMH |
ST7789V_LCMCTRL_XMX | ST7789V_LCMCTRL_XBGR);
- st7789v_send(ctx, ST7789V_VDVVRHEN_CMD, ST7789V_VDVVRHEN_CMDEN);
- st7789v_send(ctx, ST7789V_VRHS_CMD, 0xf);
- st7789v_send(ctx, ST7789V_VDVS_CMD, 0x20);
- st7789v_send(ctx, ST7789V_FRCTRL2_CMD, 0xf);
- st7789v_send(ctx, ST7789V_PWCTRL1_CMD, ST7789V_PWCTRL1_MAGIC,
ST7789V_PWCTRL1_AVDD(2) | ST7789V_PWCTRL1_AVCL(2) |
ST7789V_PWCTRL1_VDS(1));
- st7789v_send(ctx, ST7789V_PVGAMCTRL_CMD,
ST7789V_PVGAMCTRL_VP63(0xd),
ST7789V_PVGAMCTRL_VP1(0xca),
ST7789V_PVGAMCTRL_VP2(0xe),
ST7789V_PVGAMCTRL_VP4(8),
ST7789V_PVGAMCTRL_VP6(9),
ST7789V_PVGAMCTRL_VP13(7),
ST7789V_PVGAMCTRL_VP20(0x2d),
ST7789V_PVGAMCTRL_VP27(0xb) | ST7789V_PVGAMCTRL_VP36(3),
ST7789V_PVGAMCTRL_VP43(0x3d),
ST7789V_PVGAMCTRL_JP1(3) | ST7789V_PVGAMCTRL_VP50(4),
ST7789V_PVGAMCTRL_VP57(0xa),
ST7789V_PVGAMCTRL_VP59(0xa),
ST7789V_PVGAMCTRL_VP61(0x1b),
ST7789V_PVGAMCTRL_VP62(0x28));
- st7789v_send(ctx, ST7789V_NVGAMCTRL_CMD,
ST7789V_NVGAMCTRL_VN63(0xd),
ST7789V_NVGAMCTRL_VN1(0xca),
ST7789V_NVGAMCTRL_VN2(0xf),
ST7789V_NVGAMCTRL_VN4(8),
ST7789V_NVGAMCTRL_VN6(8),
ST7789V_NVGAMCTRL_VN13(7),
ST7789V_NVGAMCTRL_VN20(0x2e),
ST7789V_NVGAMCTRL_VN27(0xc) | ST7789V_NVGAMCTRL_VN36(5),
ST7789V_NVGAMCTRL_VN43(0x40),
ST7789V_NVGAMCTRL_JN1(3) | ST7789V_NVGAMCTRL_VN50(4),
ST7789V_NVGAMCTRL_VN57(9),
ST7789V_NVGAMCTRL_VN59(0xb),
ST7789V_NVGAMCTRL_VN61(0x1b),
ST7789V_NVGAMCTRL_VN62(0x28));
- st7789v_send(ctx, ST7789V_INVON_CMD);
- st7789v_send(ctx, ST7789V_RAMCTRL_CMD,
ST7789V_RAMCTRL_DM_RGB | ST7789V_RAMCTRL_RM_RGB,
ST7789V_RAMCTRL_EPF(3) | ST7789V_RAMCTRL_MAGIC);
- st7789v_send(ctx, ST7789V_RGBCTRL_CMD,
ST7789V_RGBCTRL_WO | ST7789V_RGBCTRL_RCM(2) |
ST7789V_RGBCTRL_VSYNC_HIGH | ST7789V_RGBCTRL_HSYNC_HIGH |
ST7789V_RGBCTRL_PCLK_HIGH,
ST7789V_RGBCTRL_VBP(8), ST7789V_RGBCTRL_HBP(20));
- return 0;
+}
+static int st7789v_enable(struct drm_panel *panel) +{
- struct st7789v *ctx = panel_to_st7789v(panel);
- if (ctx->backlight) {
ctx->backlight->props.state &= ~BL_CORE_FBBLANK;
ctx->backlight->props.power = FB_BLANK_UNBLANK;
backlight_update_status(ctx->backlight);
- }
- return st7789v_send(ctx, ST7789V_DISPON_CMD);
+}
+static int st7789v_disable(struct drm_panel *panel) +{
- struct st7789v *ctx = panel_to_st7789v(panel);
- st7789v_send(ctx, ST7789V_DISPOFF_CMD);
- if (ctx->backlight) {
ctx->backlight->props.power = FB_BLANK_POWERDOWN;
ctx->backlight->props.state |= BL_CORE_FBBLANK;
backlight_update_status(ctx->backlight);
- }
- return 0;
+}
+static int st7789v_unprepare(struct drm_panel *panel) +{
- struct st7789v *ctx = panel_to_st7789v(panel);
- st7789v_send(ctx, ST7789V_SLPIN_CMD);
- return 0;
+}
+static const struct drm_panel_funcs st7789v_drm_funcs = {
- .disable = st7789v_disable,
- .enable = st7789v_enable,
- .get_modes = st7789v_get_modes,
- .prepare = st7789v_prepare,
- .unprepare = st7789v_unprepare,
+};
+static int st7789v_probe(struct spi_device *spi) +{
- struct device_node *backlight;
- struct st7789v *ctx;
- int ret;
- ctx = devm_kzalloc(&spi->dev, sizeof(*ctx), GFP_KERNEL);
- if (!ctx)
return -ENOMEM;
- spi_set_drvdata(spi, ctx);
- ctx->spi = spi;
- ctx->panel.dev = &spi->dev;
- ctx->panel.funcs = &st7789v_drm_funcs;
- ctx->reset = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
- if (IS_ERR(ctx->reset)) {
dev_err(&spi->dev, "Couldn't get our reset line\n");
return PTR_ERR(ctx->reset);
- }
- backlight = of_parse_phandle(spi->dev.of_node, "backlight", 0);
- if (backlight) {
ctx->backlight = of_find_backlight_by_node(backlight);
of_node_put(backlight);
if (!ctx->backlight)
return -EPROBE_DEFER;
- }
- ret = drm_panel_add(&ctx->panel);
- if (ret < 0)
goto err_free_backlight;
- return 0;
+err_free_backlight:
- if (ctx->backlight)
put_device(&ctx->backlight->dev);
- return ret;
+}
+static int st7789v_remove(struct spi_device *spi) +{
- struct st7789v *ctx = spi_get_drvdata(spi);
- drm_panel_detach(&ctx->panel);
- drm_panel_remove(&ctx->panel);
- if (ctx->backlight)
put_device(&ctx->backlight->dev);
- return 0;
+}
+static const struct of_device_id st7789v_of_match[] = {
- { .compatible = "sitronix,st7789v" },
- { }
+}; +MODULE_DEVICE_TABLE(of, st7789v_of_match);
+static struct spi_driver st7789v_driver = {
- .probe = st7789v_probe,
- .remove = st7789v_remove,
- .driver = {
.name = "st7789v",
.of_match_table = st7789v_of_match,
- },
+}; +module_spi_driver(st7789v_driver);
+MODULE_AUTHOR("Maxime Ripard maxime.ripard@free-electrons.com"); +MODULE_DESCRIPTION("Sitronix st7789v LCD Driver"); +MODULE_LICENSE("GPL v2");