[RFC v5 7/9] drm/i915/dpcd_bl: Print return codes for VESA backlight failures

7 May 2021

Also, stop printing the DPCD register that failed, and just describe it
instead. Saves us from having to look up each register offset when reading
through kernel logs (plus, DPCD dumping with drm.debug |= 0x100 will give
us that anyway).
Signed-off-by: Lyude Paul lyude@redhat.com
---
 .../drm/i915/display/intel_dp_aux_backlight.c | 101 +++++++++---------
 1 file changed, 52 insertions(+), 49 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
index bf8e4ed56847..95f2df631052 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
@@ -274,14 +274,12 @@ static bool intel_dp_aux_vesa_backlight_dpcd_mode(struct intel_connector *connec
 {
    struct intel_dp *intel_dp = intel_attached_dp(connector);
    struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+	int ret;
    u8 mode_reg;
-	if (drm_dp_dpcd_readb(&intel_dp->aux,
-			      DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
-			      &mode_reg) != 1) {
-		drm_dbg_kms(&i915->drm,
-			    "Failed to read the DPCD register 0x%x\n",
-			    DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
+	ret = drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &mode_reg);
+	if (ret != 1) {
+		drm_dbg_kms(&i915->drm, "Failed to read backlight mode: %d\n", ret);
    	return false;
    }
@@ -297,6 +295,7 @@ static u32 intel_dp_aux_vesa_get_backlight(struct intel_connector *connector, en
 {
    struct intel_dp *intel_dp = intel_attached_dp(connector);
    struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+	int ret;
    u8 read_val[2] = { 0x0 };
    u16 level = 0;
@@ -307,10 +306,10 @@ static u32 intel_dp_aux_vesa_get_backlight(struct intel_connector *connector, en
    if (!intel_dp_aux_vesa_backlight_dpcd_mode(connector))
    	return connector->panel.backlight.max;
-	if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, &read_val,
-			     sizeof(read_val)) != sizeof(read_val)) {
-		drm_dbg_kms(&i915->drm, "Failed to read DPCD register 0x%x\n",
-			    DP_EDP_BACKLIGHT_BRIGHTNESS_MSB);
+	ret = drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, &read_val,
+			       sizeof(read_val));
+	if (ret != sizeof(read_val)) {
+		drm_dbg_kms(&i915->drm, "Failed to read brightness level: %d\n", ret);
    	return 0;
    }
@@ -333,6 +332,7 @@ intel_dp_aux_vesa_set_backlight(const struct drm_connector_state *conn_state,
    struct intel_connector *connector = to_intel_connector(conn_state->connector);
    struct intel_dp *intel_dp = intel_attached_dp(connector);
    struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+	int ret;
    u8 vals[2] = { 0x0 };
/* Write the MSB and/or LSB */
@@ -343,10 +343,10 @@ intel_dp_aux_vesa_set_backlight(const struct drm_connector_state *conn_state,
    	vals[0] = level;
    }
-	if (drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, vals,
-			      sizeof(vals)) != sizeof(vals)) {
-		drm_dbg_kms(&i915->drm,
-			    "Failed to write aux backlight level\n");
+	ret = drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, vals,
+				sizeof(vals));
+	if (ret != sizeof(vals)) {
+		drm_dbg_kms(&i915->drm, "Failed to write aux backlight level: %d\n", ret);
    	return;
    }
 }
@@ -355,26 +355,28 @@ static void set_vesa_backlight_enable(struct intel_connector *connector, bool en
 {
    struct intel_dp *intel_dp = intel_attached_dp(connector);
    struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+	int ret;
    u8 reg_val = 0;
/* Early return when display use other mechanism to enable backlight. */
    if (!connector->panel.backlight.edp.vesa.aux_enable)
    	return;
-	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER, &reg_val) != 1) {
-		drm_dbg_kms(&i915->drm, "Failed to read DPCD register 0x%x\n",
-			    DP_EDP_DISPLAY_CONTROL_REGISTER);
+	ret = drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER, &reg_val);
+	if (ret != 1) {
+		drm_dbg_kms(&i915->drm, "Failed to read eDP display control register: %d\n", ret);
    	return;
    }
+
    if (enable)
    	reg_val |= DP_EDP_BACKLIGHT_ENABLE;
    else
    	reg_val &= ~(DP_EDP_BACKLIGHT_ENABLE);
-	if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
-			       reg_val) != 1) {
-		drm_dbg_kms(&i915->drm, "Failed to %s aux backlight\n",
-			    enabledisable(enable));
+	ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER, reg_val);
+	if (ret != 1) {
+		drm_dbg_kms(&i915->drm, "Failed to %s aux backlight: %d\n",
+			    enabledisable(enable), ret);
    }
 }
@@ -386,13 +388,13 @@ intel_dp_aux_vesa_enable_backlight(const struct intel_crtc_state *crtc_state,
    struct intel_dp *intel_dp = intel_attached_dp(connector);
    struct drm_i915_private *i915 = dp_to_i915(intel_dp);
    struct intel_panel *panel = &connector->panel;
+	int ret;
    u8 dpcd_buf, new_dpcd_buf;
    u8 pwmgen_bit_count = panel->backlight.edp.vesa.pwmgen_bit_count;
-	if (drm_dp_dpcd_readb(&intel_dp->aux,
-			DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &dpcd_buf) != 1) {
-		drm_dbg_kms(&i915->drm, "Failed to read DPCD register 0x%x\n",
-			    DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
+	ret = drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &dpcd_buf);
+	if (ret != 1) {
+		drm_dbg_kms(&i915->drm, "Failed to read backlight mode: %d\n", ret);
    	return;
    }
@@ -402,24 +404,26 @@ intel_dp_aux_vesa_enable_backlight(const struct intel_crtc_state *crtc_state,
    	new_dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK;
    	new_dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD;
-		if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT,
-				       pwmgen_bit_count) != 1)
-			drm_dbg_kms(&i915->drm,
-				    "Failed to write aux pwmgen bit count\n");
+		ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT, pwmgen_bit_count);
+		if (ret != 1)
+			drm_dbg_kms(&i915->drm, "Failed to write aux pwmgen bit count: %d\n", ret);
    }
if (panel->backlight.edp.vesa.pwm_freq_pre_divider) {
-		if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_BACKLIGHT_FREQ_SET,
-				       panel->backlight.edp.vesa.pwm_freq_pre_divider) == 1)
+		ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_BACKLIGHT_FREQ_SET,
+					 panel->backlight.edp.vesa.pwm_freq_pre_divider);
+		if (ret == 1)
    		new_dpcd_buf |= DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE;
    	else
-			drm_dbg_kms(&i915->drm, "Failed to write aux backlight frequency\n");
+			drm_dbg_kms(&i915->drm, "Failed to write aux backlight frequency: %d\n",
+				    ret);
    }
if (new_dpcd_buf != dpcd_buf) {
-		if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
-				       new_dpcd_buf) != 1)
-			drm_dbg_kms(&i915->drm, "Failed to write aux backlight mode\n");
+		ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
+					 new_dpcd_buf);
+		if (ret != 1)
+			drm_dbg_kms(&i915->drm, "Failed to write aux backlight mode: %d\n", ret);
    }
intel_dp_aux_vesa_set_backlight(conn_state, level);
@@ -446,11 +450,12 @@ static u32 intel_dp_aux_vesa_calc_max_backlight(struct intel_connector *connecto
    struct intel_dp *intel_dp = intel_attached_dp(connector);
    struct intel_panel *panel = &connector->panel;
    u32 max_backlight = 0;
-	int freq, fxp, fxp_min, fxp_max, fxp_actual, f = 1;
+	int ret, freq, fxp, fxp_min, fxp_max, fxp_actual, f = 1;
    u8 pn, pn_min, pn_max;
-	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT, &pn) != 1) {
-		drm_dbg_kms(&i915->drm, "Failed to read pwmgen bit count cap\n");
+	ret = drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT, &pn);
+	if (ret != 1) {
+		drm_dbg_kms(&i915->drm, "Failed to read pwmgen bit count cap: %d\n", ret);
    	return 0;
    }
@@ -479,16 +484,14 @@ static u32 intel_dp_aux_vesa_calc_max_backlight(struct intel_connector *connecto
     * - FxP is within 25% of desired value.
     *   Note: 25% is arbitrary value and may need some tweak.
     */
-	if (drm_dp_dpcd_readb(&intel_dp->aux,
-			      DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN, &pn_min) != 1) {
-		drm_dbg_kms(&i915->drm,
-			    "Failed to read pwmgen bit count cap min\n");
+	ret = drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN, &pn_min);
+	if (ret != 1) {
+		drm_dbg_kms(&i915->drm, "Failed to read pwmgen bit count cap min: %d\n", ret);
    	return max_backlight;
    }
-	if (drm_dp_dpcd_readb(&intel_dp->aux,
-			      DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX, &pn_max) != 1) {
-		drm_dbg_kms(&i915->drm,
-			    "Failed to read pwmgen bit count cap max\n");
+	ret = drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX, &pn_max);
+	if (ret != 1) {
+		drm_dbg_kms(&i915->drm, "Failed to read pwmgen bit count cap max: %d\n", ret);
    	return max_backlight;
    }
    pn_min &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
@@ -512,9 +515,9 @@ static u32 intel_dp_aux_vesa_calc_max_backlight(struct intel_connector *connecto
    }
drm_dbg_kms(&i915->drm, "Using eDP pwmgen bit count of %d\n", pn);
-	if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT, pn) != 1) {
-		drm_dbg_kms(&i915->drm,
-			    "Failed to write aux pwmgen bit count\n");
+	ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT, pn);
+	if (ret != 1) {
+		drm_dbg_kms(&i915->drm, "Failed to write aux pwmgen bit count: %d\n", ret);
    	return max_backlight;
    }
-- 
2.30.2


    

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

[RFC v5 7/9] drm/i915/dpcd_bl: Print return codes for VESA backlight failures