Add clock selection code for AST2600. At AST2600 user could select more than one dispaly timing. Add gfx flags for future usage.
Signed-off-by: Tommy Haung tommy_huang@aspeedtech.com --- drivers/gpu/drm/aspeed/aspeed_gfx.h | 11 +++++++++++ drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c | 14 ++++++++++++++ drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 4 ++++ 3 files changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h b/drivers/gpu/drm/aspeed/aspeed_gfx.h index 4e6a442c3886..eb4c267cde5e 100644 --- a/drivers/gpu/drm/aspeed/aspeed_gfx.h +++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h @@ -16,6 +16,7 @@ struct aspeed_gfx { u32 vga_scratch_reg; u32 throd_val; u32 scan_line_max; + u32 flags;
struct drm_simple_display_pipe pipe; struct drm_connector connector; @@ -106,3 +107,13 @@ int aspeed_gfx_create_output(struct drm_device *drm); /* CRT_THROD */ #define CRT_THROD_LOW(x) (x) #define CRT_THROD_HIGH(x) ((x) << 8) + +/* SCU control */ +#define SCU_G6_CLK_COURCE 0x300 + +/* GFX FLAGS */ +#define CLK_MASK BIT(0) +#define CLK_G6 BIT(0) + +#define G6_CLK_MASK (BIT(8) | BIT(9) | BIT(10)) +#define G6_USB_40_CLK BIT(9) diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c index 827e62c1daba..a24fab22eac4 100644 --- a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c @@ -77,6 +77,18 @@ static void aspeed_gfx_disable_controller(struct aspeed_gfx *priv) regmap_update_bits(priv->scu, priv->dac_reg, BIT(16), 0); }
+static void aspeed_gfx_set_clk(struct aspeed_gfx *priv) +{ + switch (priv->flags & CLK_MASK) { + case CLK_G6: + regmap_update_bits(priv->scu, SCU_G6_CLK_COURCE, G6_CLK_MASK, 0x0); + regmap_update_bits(priv->scu, SCU_G6_CLK_COURCE, G6_CLK_MASK, G6_USB_40_CLK); + break; + default: + break; + } +} + static void aspeed_gfx_crtc_mode_set_nofb(struct aspeed_gfx *priv) { struct drm_display_mode *m = &priv->pipe.crtc.state->adjusted_mode; @@ -87,6 +99,8 @@ static void aspeed_gfx_crtc_mode_set_nofb(struct aspeed_gfx *priv) if (err) return;
+ aspeed_gfx_set_clk(priv); + #if 0 /* TODO: we have only been able to test with the 40MHz USB clock. The * clock is fixed, so we cannot adjust it here. */ diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c index d10246b1d1c2..af56ffdccc65 100644 --- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c @@ -64,6 +64,7 @@ struct aspeed_gfx_config { u32 vga_scratch_reg; /* VGA scratch register in SCU */ u32 throd_val; /* Default Threshold Seting */ u32 scan_line_max; /* Max memory size of one scan line */ + u32 gfx_flags; /* Flags for gfx chip caps */ };
static const struct aspeed_gfx_config ast2400_config = { @@ -72,6 +73,7 @@ static const struct aspeed_gfx_config ast2400_config = { .vga_scratch_reg = 0x50, .throd_val = CRT_THROD_LOW(0x1e) | CRT_THROD_HIGH(0x12), .scan_line_max = 64, + .gfx_flags = 0, };
static const struct aspeed_gfx_config ast2500_config = { @@ -80,6 +82,7 @@ static const struct aspeed_gfx_config ast2500_config = { .vga_scratch_reg = 0x50, .throd_val = CRT_THROD_LOW(0x24) | CRT_THROD_HIGH(0x3c), .scan_line_max = 128, + .gfx_flags = 0, };
static const struct aspeed_gfx_config ast2600_config = { @@ -88,6 +91,7 @@ static const struct aspeed_gfx_config ast2600_config = { .vga_scratch_reg = 0x50, .throd_val = CRT_THROD_LOW(0x50) | CRT_THROD_HIGH(0x70), .scan_line_max = 128, + .gfx_flags = CLK_G6, };
static const struct of_device_id aspeed_gfx_match[] = {