Scaler and pixel_ext configuration does not contain a long living state, it is used only during plane update, so remove these two fiels from dpu_plane_state and allocate them on stack.
Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org --- drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 59 ++++++++++------------- drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h | 6 --- 2 files changed, 26 insertions(+), 39 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c index cd1a1e333f7c..46446610e07e 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c @@ -527,14 +527,12 @@ static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu, struct dpu_plane_state *pstate, uint32_t src_w, uint32_t src_h, uint32_t dst_w, uint32_t dst_h, struct dpu_hw_scaler3_cfg *scale_cfg, + struct dpu_hw_pixel_ext *pixel_ext, const struct dpu_format *fmt, uint32_t chroma_subsmpl_h, uint32_t chroma_subsmpl_v) { uint32_t i;
- memset(scale_cfg, 0, sizeof(*scale_cfg)); - memset(&pstate->pixel_ext, 0, sizeof(struct dpu_hw_pixel_ext)); - scale_cfg->phase_step_x[DPU_SSPP_COMP_0] = mult_frac((1 << PHASE_STEP_SHIFT), src_w, dst_w); scale_cfg->phase_step_y[DPU_SSPP_COMP_0] = @@ -573,9 +571,9 @@ static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu, scale_cfg->preload_y[i] = DPU_QSEED3_DEFAULT_PRELOAD_V; }
- pstate->pixel_ext.num_ext_pxls_top[i] = + pixel_ext->num_ext_pxls_top[i] = scale_cfg->src_height[i]; - pstate->pixel_ext.num_ext_pxls_left[i] = + pixel_ext->num_ext_pxls_left[i] = scale_cfg->src_width[i]; } if (!(DPU_FORMAT_IS_YUV(fmt)) && (src_h == dst_h) @@ -645,6 +643,11 @@ static void _dpu_plane_setup_scaler(struct dpu_plane *pdpu, struct dpu_hw_pipe_cfg *pipe_cfg) { const struct drm_format_info *info = drm_format_info(fmt->base.pixel_format); + struct dpu_hw_scaler3_cfg scaler3_cfg; + struct dpu_hw_pixel_ext pixel_ext; + + memset(&scaler3_cfg, 0, sizeof(scaler3_cfg)); + memset(&pixel_ext, 0, sizeof(pixel_ext));
/* don't chroma subsample if decimating */ /* update scaler. calculate default config for QSEED3 */ @@ -653,8 +656,23 @@ static void _dpu_plane_setup_scaler(struct dpu_plane *pdpu, drm_rect_height(&pipe_cfg->src_rect), drm_rect_width(&pipe_cfg->dst_rect), drm_rect_height(&pipe_cfg->dst_rect), - &pstate->scaler3_cfg, fmt, + &scaler3_cfg, &pixel_ext, fmt, info->hsub, info->vsub); + + if (pdpu->pipe_hw->ops.setup_pe) + pdpu->pipe_hw->ops.setup_pe(pdpu->pipe_hw, + &pixel_ext); + + /** + * when programmed in multirect mode, scalar block will be + * bypassed. Still we need to update alpha and bitwidth + * ONLY for RECT0 + */ + if (pdpu->pipe_hw->ops.setup_scaler && + pstate->multirect_index != DPU_SSPP_RECT_1) + pdpu->pipe_hw->ops.setup_scaler(pdpu->pipe_hw, + pipe_cfg, &pixel_ext, + &scaler3_cfg); }
/** @@ -695,7 +713,6 @@ static int _dpu_plane_color_fill(struct dpu_plane *pdpu, drm_rect_width(&pipe_cfg.dst_rect); pipe_cfg.src_rect.y2 = drm_rect_height(&pipe_cfg.dst_rect); - _dpu_plane_setup_scaler(pdpu, pstate, fmt, true, &pipe_cfg);
if (pdpu->pipe_hw->ops.setup_format) pdpu->pipe_hw->ops.setup_format(pdpu->pipe_hw, @@ -707,15 +724,7 @@ static int _dpu_plane_color_fill(struct dpu_plane *pdpu, &pipe_cfg, pstate->multirect_index);
- if (pdpu->pipe_hw->ops.setup_pe) - pdpu->pipe_hw->ops.setup_pe(pdpu->pipe_hw, - &pstate->pixel_ext); - - if (pdpu->pipe_hw->ops.setup_scaler && - pstate->multirect_index != DPU_SSPP_RECT_1) - pdpu->pipe_hw->ops.setup_scaler(pdpu->pipe_hw, - &pipe_cfg, &pstate->pixel_ext, - &pstate->scaler3_cfg); + _dpu_plane_setup_scaler(pdpu, pstate, fmt, true, &pipe_cfg); }
return 0; @@ -1102,8 +1111,6 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
pipe_cfg.dst_rect = state->dst;
- _dpu_plane_setup_scaler(pdpu, pstate, fmt, false, &pipe_cfg); - /* override for color fill */ if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG) { /* skip remaining processing on color fill */ @@ -1116,21 +1123,7 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane) pstate->multirect_index); }
- if (pdpu->pipe_hw->ops.setup_pe && - (pstate->multirect_index != DPU_SSPP_RECT_1)) - pdpu->pipe_hw->ops.setup_pe(pdpu->pipe_hw, - &pstate->pixel_ext); - - /** - * when programmed in multirect mode, scalar block will be - * bypassed. Still we need to update alpha and bitwidth - * ONLY for RECT0 - */ - if (pdpu->pipe_hw->ops.setup_scaler && - pstate->multirect_index != DPU_SSPP_RECT_1) - pdpu->pipe_hw->ops.setup_scaler(pdpu->pipe_hw, - &pipe_cfg, &pstate->pixel_ext, - &pstate->scaler3_cfg); + _dpu_plane_setup_scaler(pdpu, pstate, fmt, false, &pipe_cfg);
if (pdpu->pipe_hw->ops.setup_multirect) pdpu->pipe_hw->ops.setup_multirect( diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h index d5b7f5876e64..3e4ed8a33a3e 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h @@ -23,8 +23,6 @@ * @multirect_index: index of the rectangle of SSPP * @multirect_mode: parallel or time multiplex multirect mode * @pending: whether the current update is still pending - * @scaler3_cfg: configuration data for scaler3 - * @pixel_ext: configuration data for pixel extensions * @cdp_cfg: CDP configuration * @plane_fetch_bw: calculated BW per plane * @plane_clk: calculated clk per plane @@ -38,10 +36,6 @@ struct dpu_plane_state { uint32_t multirect_mode; bool pending;
- /* scaler configuration */ - struct dpu_hw_scaler3_cfg scaler3_cfg; - struct dpu_hw_pixel_ext pixel_ext; - struct dpu_hw_pipe_cdp_cfg cdp_cfg; u64 plane_fetch_bw; u64 plane_clk;