The bus_flags and bus_format handling logic does not seem to cover all potential usecases. Specifically, this seems to fail with an "edt,etm0700g0edh6" display attached to an 24bit display interface, with interface-pix-fmt = "rgb24" set in DT.
In this specific setup, the panel-simple.c driver entry for the display sets .bus_flags to non-zero value. However, as imxpd->bus_format is set from the DT property "interface-pix-fmt", imx_pd_encoder_atomic_check() will set imx_crtc_state->bus_flags = imxpd->bus_flags even though the imxpd->bus_flags is zero, while the di->bus_flags is correctly set by the panel-simple.c and non-zero. The result is incorrect flags being used for the display configuration and thus an image corruption. (Specifically, DRM_BUS_FLAG_PIXDATA_POSEDGE is not propagated and thus the ipuv3 clocks pixels on the wrong edge).
This patch fixes the problem by overriding the imx_crtc_state->bus_format from the imxpd->bus_format only if the DT property "interface-pix-fmt" is present or if the DI provides no formats. Similarly for bus_flags, which are set from imxpd->bus_flags only if the DI provides no formats.
Signed-off-by: Marek Vasut marex@denx.de Cc: Daniel Vetter daniel@ffwll.ch Cc: David Airlie airlied@linux.ie Cc: Fabio Estevam festevam@gmail.com Cc: NXP Linux Team linux-imx@nxp.com Cc: Philipp Zabel p.zabel@pengutronix.de Cc: Sascha Hauer s.hauer@pengutronix.de Cc: Shawn Guo shawnguo@kernel.org Cc: linux-arm-kernel@lists.infradead.org To: dri-devel@lists.freedesktop.org --- drivers/gpu/drm/imx/parallel-display.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c index 35518e5de356..92f00b12c068 100644 --- a/drivers/gpu/drm/imx/parallel-display.c +++ b/drivers/gpu/drm/imx/parallel-display.c @@ -113,13 +113,16 @@ static int imx_pd_encoder_atomic_check(struct drm_encoder *encoder, struct drm_display_info *di = &conn_state->connector->display_info; struct imx_parallel_display *imxpd = enc_to_imxpd(encoder);
- if (!imxpd->bus_format && di->num_bus_formats) { - imx_crtc_state->bus_flags = di->bus_flags; + if (imxpd->bus_format || !di->num_bus_formats) + imx_crtc_state->bus_format = imxpd->bus_format; + else imx_crtc_state->bus_format = di->bus_formats[0]; - } else { + + if (di->num_bus_formats) + imx_crtc_state->bus_flags = di->bus_flags; + else imx_crtc_state->bus_flags = imxpd->bus_flags; - imx_crtc_state->bus_format = imxpd->bus_format; - } + imx_crtc_state->di_hsync_pin = 2; imx_crtc_state->di_vsync_pin = 3;