Hi, please find some review comments inline.
BR, Jani.
On Sat, 23 Mar 2013, Dylan Semler dylan.semler@gmail.com wrote:
There is at least one monitor that doesn't report its native resolution in its EDID block. This enhancement extends the EDID quirk logic to make monitors like this "just work".
This patch sets up a new quirk list where monitors' correct width, height, refresh rate, and reduced blanking parameters are specified. When a matching monitor is attached the full mode is calculated with drm_cvt_mode() and added to the connector. The DRM_MODE_TYPE_PREFERRED bit is set on the new mode and unset from all other modes.
The patch also defines a new quirk bit: EDID_QUIRK_FORCE_MODE. This bit needs to be set for the new quirk list discribed above to be checked.
Signed-off-by: Dylan Semler dylan.semler@gmail.com
drivers/gpu/drm/drm_edid.c | 78 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 78 insertions(+)
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index c194f4e..38b8641 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -68,6 +68,8 @@ #define EDID_QUIRK_DETAILED_SYNC_PP (1 << 6) /* Force reduced-blanking timings for detailed modes */ #define EDID_QUIRK_FORCE_REDUCED_BLANKING (1 << 7) +/* Force specific mode for monitors that don't report correct EDIDs */ +#define EDID_QUIRK_FORCE_MODE (1 << 8)
struct detailed_mode_closure { struct drm_connector *connector; @@ -127,6 +129,16 @@ static struct edid_quirk { { "VSC", 5020, EDID_QUIRK_FORCE_REDUCED_BLANKING }, };
+static struct edid_quirk_force_mode {
- char vendor[4];
- int product_id;
- int hdisplay;
- int vdisplay;
- int vrefresh;
- bool reduced;
+} edid_quirk_force_mode_list[] = { +};
/*
- Autogenerated from the DMT spec.
- This table is copied from xfree86/modes/xf86EdidModes.c.
@@ -2219,6 +2231,70 @@ add_detailed_modes(struct drm_connector *connector, struct edid *edid, return closure.modes; }
+/* Add an explicit mode based on a quirk
- */
+static int +do_force_quirk_modes(struct drm_connector *connector, int hdisplay,
int vdisplay, int vrefresh, bool reduced)
Nitpick: This adds one mode, not many _modes_.
+{
- struct drm_display_mode *mode, *t, *cur_mode;
- struct drm_device *dev = connector->dev;
- int num_modes = 0;
- /* sanity check display parameters */
- if (hdisplay < 0)
return 0;- if (vdisplay < 0)
return 0;- if (vrefresh < 0)
return 0;- /* loop through the probed modes and clear the preferred bit */
- list_for_each_entry_safe(cur_mode, t, &connector->probed_modes, head)
cur_mode->type &= ~DRM_MODE_TYPE_PREFERRED;
You're not deleting entries, so list_for_each_entry() would suffice, getting rid of the temp variable.
- mode = drm_cvt_mode(dev, hdisplay, vdisplay, vrefresh, reduced, 0, 0);
You could
if (!mode) return 0;
here and get rid of the num_modes variable.
- if (mode) {
mode->type |= DRM_MODE_TYPE_PREFERRED;drm_mode_probed_add(connector, mode);num_modes++;- }
- return num_modes;
+}
+/*
- add_force_quirk_modes - Add modes based on monitor's EDID quirks
- @connector: attached connector
- @edid: EDID block to scan
- @quirks: quirks to apply
- At least one monitor doesn't report its native resolution in its EDID block.
- Here we add the native mode according to this quirk
- */
+static int +add_force_quirk_modes(struct drm_connector *connector, struct edid *edid,
u32 quirks)+{
- struct edid_quirk_force_mode *quirk_mode;
- int i, num_modes = 0;
- for (i = 0; i < ARRAY_SIZE(edid_quirk_force_mode_list); i++) {
quirk_mode = &edid_quirk_force_mode_list[i];if (edid_vendor(edid, quirk_mode->vendor) &&(EDID_PRODUCT_ID(edid) == quirk_mode->product_id)) {num_modes = do_force_quirk_modes(connector,quirk_mode->hdisplay,quirk_mode->vdisplay,quirk_mode->vrefresh,quirk_mode->reduced);
I was wondering why you don't bail out here. Maybe you want to be able to add more than one quirk mode? In that case you should +=, not = the num_modes.
(Note that then do_force_quirk_modes makes the last one in the array the preferred mode, clearing the DRM_MODE_TYPE_PREFERRED from the previously added quirk modes.)
}- }
- return num_modes;
+}
#define HDMI_IDENTIFIER 0x000C03 #define AUDIO_BLOCK 0x01 #define VIDEO_BLOCK 0x02 @@ -2803,6 +2879,8 @@ int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
if (quirks & (EDID_QUIRK_PREFER_LARGE_60 | EDID_QUIRK_PREFER_LARGE_75)) edid_fixup_preferred(connector, quirks);
- if (quirks & EDID_QUIRK_FORCE_MODE)
num_modes += add_force_quirk_modes(connector, edid, quirks);
You don't use quirks within add_force_quirk_modes() for anything.
drm_add_display_info(edid, &connector->display_info);
-- 1.7.11.7
dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel