Hi Maciej,
On Wednesday, 30 May 2018 15:15:58 EEST Maciej Purski wrote:
From: Andrzej Hajda a.hajda@samsung.com
The patch adds bindings to Toshiba DSI/LVDS bridge TC358764. Bindings describe power supplies, reset gpio and video interfaces.
Signed-off-by: Andrzej Hajda a.hajda@samsung.com Signed-off-by: Maciej Purski m.purski@samsung.com
.../bindings/display/bridge/toshiba,tc358764.txt | 37 +++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt new file mode 100644 index 0000000..6eda14f --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt @@ -0,0 +1,37 @@ +TC358764 MIPI-DSI to LVDS panel bridge
+Required properties:
- compatible: "toshiba,tc358764"
- reg: the virtual channel number of a DSI peripheral
- vddc-supply: core voltage supply, 1.2V
- vddio-supply: I/O voltage supply, 1.8V or 3.3V
- vddlvds-supply: LVDS1/2 voltage supply, 3.3V
- reset-gpios: a GPIO spec for the reset pin
+The device node can contain zero to two 'port' child nodes, each with one +child 'endpoint' node, according to the bindings defined in [1]. +The following are properties specific to those nodes.
+port:
- reg: (required) can be 0 for DSI port or 1 for LVDS port;
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
Could you please take the comments I made on v1 into account when you'll post v3 ?
+Example:
- bridge@0 {
reg = <0>;compatible = "toshiba,tc358764";vddc-supply = <&vcc_1v2_reg>;vddio-supply = <&vcc_1v8_reg>;vddlvds-supply = <&vcc_3v3_reg>;reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;#address-cells = <1>;#size-cells = <0>;port@1 {reg = <1>;lvds_ep: endpoint {remote-endpoint = <&panel_ep>;};};- };