Since other drivers are also going to need to be aware of the sink count in order to do proper dongle detection, we might as well steal i915's DP_SINK_COUNT helpers and move them into DRM helpers so that other dirvers can use them as well.
Note that this also starts using intel_dp_has_sink_count() in intel_dp_detect_dpcd(), which is a functional change.
Signed-off-by: Lyude Paul lyude@redhat.com Reviewed-by: Sean Paul sean@poorly.run --- drivers/gpu/drm/drm_dp_helper.c | 22 ++++++++++++++++++++++ drivers/gpu/drm/i915/display/intel_dp.c | 21 ++++++++++++--------- include/drm/drm_dp_helper.h | 8 +++++++- 3 files changed, 41 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index 4f845995f1f66..863e0babc1903 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -714,6 +714,28 @@ void drm_dp_set_subconnector_property(struct drm_connector *connector, } EXPORT_SYMBOL(drm_dp_set_subconnector_property);
+/** + * drm_dp_has_sink_count() - Check whether a given connector has a valid sink + * count + * @connector: The DRM connector to check + * @dpcd: A cached copy of the connector's DPCD RX capabilities + * @desc: A cached copy of the connector's DP descriptor + * + * Returns: %True if the (e)DP connector has a valid sink count that should + * be probed, %false otherwise. + */ +bool drm_dp_has_sink_count(struct drm_connector *connector, + const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const struct drm_dp_desc *desc) +{ + /* Some eDP panels don't set a valid value for the sink count */ + return connector->connector_type != DRM_MODE_CONNECTOR_eDP && + dpcd[DP_DPCD_REV] >= DP_DPCD_REV_11 && + dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT && + !drm_dp_has_quirk(desc, 0, DP_DPCD_QUIRK_NO_SINK_COUNT); +} +EXPORT_SYMBOL(drm_dp_has_sink_count); + /* * I2C-over-AUX implementation */ diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index 984e49194ca31..35a4779a442e2 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -4634,6 +4634,16 @@ intel_edp_init_dpcd(struct intel_dp *intel_dp) return true; }
+static bool +intel_dp_has_sink_count(struct intel_dp *intel_dp) +{ + if (!intel_dp->attached_connector) + return false; + + return drm_dp_has_sink_count(&intel_dp->attached_connector->base, + intel_dp->dpcd, + &intel_dp->desc); +}
static bool intel_dp_get_dpcd(struct intel_dp *intel_dp) @@ -4653,13 +4663,7 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp) intel_dp_set_common_rates(intel_dp); }
- /* - * Some eDP panels do not set a valid value for sink count, that is why - * it don't care about read it here and in intel_edp_init_dpcd(). - */ - if (!intel_dp_is_edp(intel_dp) && - !drm_dp_has_quirk(&intel_dp->desc, 0, - DP_DPCD_QUIRK_NO_SINK_COUNT)) { + if (intel_dp_has_sink_count(intel_dp)) { u8 count; ssize_t r;
@@ -5939,9 +5943,8 @@ intel_dp_detect_dpcd(struct intel_dp *intel_dp) return connector_status_connected;
/* If we're HPD-aware, SINK_COUNT changes dynamically */ - if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && + if (intel_dp_has_sink_count(intel_dp) && intel_dp->downstream_ports[0] & DP_DS_PORT_HPD) { - return intel_dp->sink_count ? connector_status_connected : connector_status_disconnected; } diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 1349f16564ace..a1413a531eaf4 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -1631,6 +1631,11 @@ void drm_dp_set_subconnector_property(struct drm_connector *connector, const u8 *dpcd, const u8 port_cap[4]);
+struct drm_dp_desc; +bool drm_dp_has_sink_count(struct drm_connector *connector, + const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const struct drm_dp_desc *desc); + void drm_dp_remote_aux_init(struct drm_dp_aux *aux); void drm_dp_aux_init(struct drm_dp_aux *aux); int drm_dp_aux_register(struct drm_dp_aux *aux); @@ -1689,7 +1694,8 @@ enum drm_dp_quirk { * @DP_DPCD_QUIRK_NO_SINK_COUNT: * * The device does not set SINK_COUNT to a non-zero value. - * The driver should ignore SINK_COUNT during detection. + * The driver should ignore SINK_COUNT during detection. Note that + * drm_dp_has_sink_count() automatically checks for this quirk. */ DP_DPCD_QUIRK_NO_SINK_COUNT, /**