Mipi input expects the memory layout to be unpacked with 8 bits per pixel in RGB (BRG) order. If the LCD is not configured properly, corrupted output results, changed dma_unpacked to 0 in mipi FG.
Signed-off-by: Anitha Chrisanthus anitha.chrisanthus@intel.com Reviewed-by: Bob Paauwe bob.j.paauwe@intel.com --- drivers/gpu/drm/kmb/kmb_crtc.c | 6 +++--- drivers/gpu/drm/kmb/kmb_drv.h | 1 + drivers/gpu/drm/kmb/kmb_dsi.c | 27 +++++++++++++++++---------- drivers/gpu/drm/kmb/kmb_dsi.h | 1 + drivers/gpu/drm/kmb/kmb_plane.c | 37 +++++++++++++++++++++++++++---------- drivers/gpu/drm/kmb/kmb_regs.h | 1 + 6 files changed, 50 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/kmb/kmb_crtc.c b/drivers/gpu/drm/kmb/kmb_crtc.c index f8b4fde..d9f6199 100644 --- a/drivers/gpu/drm/kmb/kmb_crtc.c +++ b/drivers/gpu/drm/kmb/kmb_crtc.c @@ -105,16 +105,16 @@ static void kmb_crtc_mode_set_nofb(struct drm_crtc *crtc) kmb_dsi_hw_init(dev); #ifdef LCD_TEST // vm.vfront_porch = m->crtc_vsync_start - m->crtc_vdisplay; - vm.vfront_porch = 0; + vm.vfront_porch = 2; // vm.vback_porch = m->crtc_vtotal - m->crtc_vsync_end; - vm.vback_porch = 0; + vm.vback_porch = 2; // vm.vsync_len = m->crtc_vsync_end - m->crtc_vsync_start; vm.vsync_len = 1; //vm.hfront_porch = m->crtc_hsync_start - m->crtc_hdisplay; vm.hfront_porch = 0; vm.hback_porch = 0; //vm.hback_porch = m->crtc_htotal - m->crtc_hsync_end; - vm.hsync_len = 1; + vm.hsync_len = 7; // vm.hsync_len = m->crtc_hsync_end - m->crtc_hsync_start;
vsync_start_offset = m->crtc_vsync_start - m->crtc_hsync_start; diff --git a/drivers/gpu/drm/kmb/kmb_drv.h b/drivers/gpu/drm/kmb/kmb_drv.h index c376944..b194139 100644 --- a/drivers/gpu/drm/kmb/kmb_drv.h +++ b/drivers/gpu/drm/kmb/kmb_drv.h @@ -50,6 +50,7 @@ struct kmb_drm_private { spinlock_t irq_lock; int irq_lcd; int irq_mipi; + dma_addr_t fb_addr; };
static inline struct kmb_drm_private *to_kmb(const struct drm_device *dev) diff --git a/drivers/gpu/drm/kmb/kmb_dsi.c b/drivers/gpu/drm/kmb/kmb_dsi.c index f06fd92..3b3bb0a 100644 --- a/drivers/gpu/drm/kmb/kmb_dsi.c +++ b/drivers/gpu/drm/kmb/kmb_dsi.c @@ -45,6 +45,7 @@ static int hw_initialized; #define IMAGE_PATH "/home/root/1280x720.pnm" //#define MIPI_TX_TEST_PATTERN_GENERATION +//#define MIPI_DMA //#define RTL_TEST //#define IMG_WIDTH_PX 640 //#define IMG_HEIGHT_LINES 10 @@ -53,6 +54,7 @@ static int hw_initialized;
/*MIPI TX CFG*/ //#define MIPI_TX_LANE_DATA_RATE_MBPS 1782 +//#define MIPI_TX_LANE_DATA_RATE_MBPS 800 #define MIPI_TX_LANE_DATA_RATE_MBPS 891 //#define MIPI_TX_LANE_DATA_RATE_MBPS 80 #define MIPI_TX_REF_CLK_KHZ 24000 @@ -100,14 +102,14 @@ static struct mipi_dsi_device *dsi_device; * these will eventually go to the device tree sections, * and can be used as a refernce later for device tree additions */ -//#define RES_1920x1080 +#define RES_1920x1080 #ifdef RES_1920x1080 #define IMG_HEIGHT_LINES 1080 #define IMG_WIDTH_PX 1920 #define MIPI_TX_ACTIVE_LANES 4 #endif
-#define RES_1280x720 +//#define RES_1280x720 #ifdef RES_1280x720 #define IMG_HEIGHT_LINES 720 #define IMG_WIDTH_PX 1280 @@ -117,9 +119,9 @@ struct mipi_tx_frame_section_cfg mipi_tx_frame0_sect_cfg = { .width_pixels = IMG_WIDTH_PX, .height_lines = IMG_HEIGHT_LINES, .data_type = DSI_LP_DT_PPS_RGB888_24B, - //.data_mode = MIPI_DATA_MODE1, - .data_mode = MIPI_DATA_MODE0, - .dma_packed = 1 + .data_mode = MIPI_DATA_MODE1, +// .data_mode = MIPI_DATA_MODE0, + .dma_packed = 0 };
#ifdef RES_1920x1080 @@ -564,12 +566,15 @@ static u32 mipi_tx_fg_section_cfg_regs(struct kmb_drm_private *dev_p, << MIPI_TX_SECT_VC_SHIFT); /* bits [23:22] */ /* data mode */ cfg |= ((ph_cfg->data_mode & MIPI_TX_SECT_DM_MASK) - << MIPI_TX_SECT_DM_SHIFT); /* bits [24:25] */ - cfg |= MIPI_TX_SECT_DMA_PACKED; - DRM_INFO("%s : %d ctrl=%d frame_id=%d section=%d cfg=%x\n", - __func__, __LINE__, ctrl_no, frame_id, section, cfg); + << MIPI_TX_SECT_DM_SHIFT); /* bits [24:25]*/ + if (ph_cfg->dma_packed) + cfg |= MIPI_TX_SECT_DMA_PACKED; + DRM_INFO("%s : %d ctrl=%d frame_id=%d section=%d cfg=%x packed=%d\n", + __func__, __LINE__, ctrl_no, frame_id, section, cfg, + ph_cfg->dma_packed); kmb_write_mipi(dev_p, (MIPI_TXm_HS_FGn_SECTo_PH(ctrl_no, frame_id, - section)), cfg); + section)), cfg); + /*unpacked bytes */ /*there are 4 frame generators and each fg has 4 sections *there are 2 registers for unpacked bytes - @@ -621,6 +626,7 @@ static u32 mipi_tx_fg_section_cfg(struct kmb_drm_private *dev_p, u8 frame_id, ph_cfg.wc = *wc; ph_cfg.data_mode = frame_scfg->data_mode; ph_cfg.data_type = frame_scfg->data_type; + ph_cfg.dma_packed = frame_scfg->dma_packed; ph_cfg.vchannel = frame_id;
mipi_tx_fg_section_cfg_regs(dev_p, frame_id, section, @@ -647,6 +653,7 @@ static void mipi_tx_fg_cfg_regs(struct kmb_drm_private *dev_p, * mipi clock speed in RTL tests */ sysclk = KMB_SYS_CLK_MHZ - 50; +// sysclk = KMB_SYS_CLK_MHZ;
/*ppl-pixel packing layer, llp-low level protocol * frame genartor timing parameters are clocked on the system clock diff --git a/drivers/gpu/drm/kmb/kmb_dsi.h b/drivers/gpu/drm/kmb/kmb_dsi.h index d74dc29..ece4ee1 100644 --- a/drivers/gpu/drm/kmb/kmb_dsi.h +++ b/drivers/gpu/drm/kmb/kmb_dsi.h @@ -282,6 +282,7 @@ struct mipi_tx_frame_sect_phcfg { enum mipi_data_mode data_mode; enum mipi_dsi_data_type data_type; uint8_t vchannel; + uint8_t dma_packed; };
struct mipi_tx_frame_cfg { diff --git a/drivers/gpu/drm/kmb/kmb_plane.c b/drivers/gpu/drm/kmb/kmb_plane.c index 7aeca07..3cd9b0d 100644 --- a/drivers/gpu/drm/kmb/kmb_plane.c +++ b/drivers/gpu/drm/kmb/kmb_plane.c @@ -116,6 +116,7 @@ static const u32 csc_coef_lcd[] = { -179, 125, -226 };
+ static unsigned int check_pixel_format(struct drm_plane *plane, u32 format) { int i; @@ -264,17 +265,21 @@ unsigned int set_pixel_format(u32 format) val = LCD_LAYER_FORMAT_RGBA8888 | LCD_LAYER_BGR_ORDER; break; } + DRM_INFO("%s : %d layer format val=%d\n", __func__, __LINE__, val); return val; }
unsigned int set_bits_per_pixel(const struct drm_format_info *format) { - int i; u32 bpp = 0; unsigned int val = 0;
- for (i = 0; i < format->num_planes; i++) - bpp += 8 * format->cpp[i]; + if (format->num_planes > 1) { + val = LCD_LAYER_8BPP; + return val; + } + + bpp += 8*format->cpp[0];
switch (bpp) { case 8: @@ -290,8 +295,8 @@ unsigned int set_bits_per_pixel(const struct drm_format_info *format) val = LCD_LAYER_32BPP; break; } - DRM_INFO("%s : %d bpp=0x%x\n", __func__, __LINE__, bpp); - val = LCD_LAYER_24BPP; + + DRM_INFO("%s : %d bpp=%d val=%d\n", __func__, __LINE__, bpp, val); return val; }
@@ -347,11 +352,12 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
dev_p = plane->dev->dev_private;
- src_w = plane->state->src_w >> 16; + src_w = (plane->state->src_w >> 16); src_h = plane->state->src_h >> 16; crtc_x = plane->state->crtc_x; crtc_y = plane->state->crtc_y;
+ DRM_INFO("src_w=%d src_h=%d\n", src_w, src_h); kmb_write_lcd(dev_p, LCD_LAYERn_WIDTH(plane_id), src_w-1); kmb_write_lcd(dev_p, LCD_LAYERn_HEIGHT(plane_id), src_h-1); kmb_write_lcd(dev_p, LCD_LAYERn_COL_START(plane_id), crtc_x); @@ -361,6 +367,7 @@ static void kmb_plane_atomic_update(struct drm_plane *plane, val |= set_bits_per_pixel(fb->format); /*CHECKME Leon drvr sets it to 100 try this for now */ val |= LCD_LAYER_FIFO_100; + val |= LCD_LAYER_BGR_ORDER; kmb_write_lcd(dev_p, LCD_LAYERn_CFG(plane_id), val);
/*re-initialize interrupts */ @@ -375,29 +382,33 @@ static void kmb_plane_atomic_update(struct drm_plane *plane, | LCD_DMA_LAYER_VSTRIDE_EN; */ dma_cfg = LCD_DMA_LAYER_ENABLE | LCD_DMA_LAYER_VSTRIDE_EN - | LCD_DMA_LAYER_AXI_BURST_16 | LCD_DMA_LAYER_CONT_UPDATE; + | LCD_DMA_LAYER_AXI_BURST_16 | + LCD_DMA_LAYER_CONT_PING_PONG_UPDATE;
/* disable DMA first */ kmb_write_lcd(dev_p, LCD_LAYERn_DMA_CFG(plane_id), ~LCD_DMA_LAYER_ENABLE); + kmb_write_lcd(dev_p, LCD_FIFO_FLUSH + plane_id*0x400, 1);
/* pinpong mode is enabled - at the end of DMA transfer, start new * transfer alternatively using main and shadow register settings. * So update both main and shadow registers */ addr = drm_fb_cma_get_gem_addr(fb, plane->state, 0); + dev_p->fb_addr = addr; kmb_write_lcd(dev_p, LCD_LAYERn_DMA_START_ADDR(plane_id), addr); kmb_write_lcd(dev_p, LCD_LAYERn_DMA_START_SHADOW(plane_id), addr);
width = fb->width; height = fb->height; - dma_len = width * height * 1; + dma_len = width * height * fb->format->cpp[0]; kmb_write_lcd(dev_p, LCD_LAYERn_DMA_LEN(plane_id), dma_len); kmb_write_lcd(dev_p, LCD_LAYERn_DMA_LEN_SHADOW(plane_id), dma_len);
- kmb_write_lcd(dev_p, LCD_LAYERn_DMA_LINE_VSTRIDE(plane_id), width); + kmb_write_lcd(dev_p, LCD_LAYERn_DMA_LINE_VSTRIDE(plane_id), + fb->pitches[0]); kmb_write_lcd(dev_p, LCD_LAYERn_DMA_LINE_WIDTH(plane_id), - (width)); + (width*fb->format->cpp[0]));
/*program Cb/Cr for planar formats*/ if (num_planes > 1) { @@ -435,6 +446,9 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
/* enable DMA */ kmb_write_lcd(dev_p, LCD_LAYERn_DMA_CFG(plane_id), dma_cfg); + DRM_INFO("%s : %d dma_cfg=0x%x LCD_DMA_CFG=0x%x\n", __func__, + __LINE__, dma_cfg, + kmb_read_lcd(dev_p, LCD_LAYERn_DMA_CFG(plane_id)));
switch (plane_id) { case LAYER_0: @@ -468,6 +482,7 @@ static void kmb_plane_atomic_update(struct drm_plane *plane, * from the Myriadx tests */ out_format |= LCD_OUTF_FORMAT_RGB888; +// out_format |= LCD_OUTF_BGR_ORDER;
if (val & LCD_LAYER_PLANAR_STORAGE) { /*enable CSC if input is planar and output is RGB */ @@ -479,7 +494,9 @@ static void kmb_plane_atomic_update(struct drm_plane *plane, /*leave RGB order,conversion mode and clip mode to default*/ /* do not interleave RGB channels for mipi Tx compatibility */ out_format |= LCD_OUTF_MIPI_RGB_MODE; +// out_format |= LCD_OUTF_SYNC_MODE ; kmb_write_lcd(dev_p, LCD_OUT_FORMAT_CFG, out_format); + // kmb_write_lcd(dev_p, LCD_CONTROL, LCD_CTRL_ENABLE); #endif } diff --git a/drivers/gpu/drm/kmb/kmb_regs.h b/drivers/gpu/drm/kmb/kmb_regs.h index 67dd1f4..c80646a 100644 --- a/drivers/gpu/drm/kmb/kmb_regs.h +++ b/drivers/gpu/drm/kmb/kmb_regs.h @@ -370,6 +370,7 @@ #define LCD_OUTF_BGR_ORDER (1 << 5) #define LCD_OUTF_Y_ORDER (1 << 6) #define LCD_OUTF_CRCB_ORDER (1 << 7) +#define LCD_OUTF_SYNC_MODE (1 << 11) #define LCD_OUTF_RGB_CONV_MODE (1 << 14) #define LCD_OUTF_MIPI_RGB_MODE (1 << 18)