eDP driver is being removed, so drop bindings description.
Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org --- .../devicetree/bindings/display/msm/edp.txt | 56 ------------------- 1 file changed, 56 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/msm/edp.txt
diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt deleted file mode 100644 index eff9daff418c..000000000000 --- a/Documentation/devicetree/bindings/display/msm/edp.txt +++ /dev/null @@ -1,56 +0,0 @@ -Qualcomm Technologies Inc. adreno/snapdragon eDP output - -Required properties: -- compatible: - * "qcom,mdss-edp" -- reg: Physical base address and length of the registers of controller and PLL -- reg-names: The names of register regions. The following regions are required: - * "edp" - * "pll_base" -- interrupts: The interrupt signal from the eDP block. -- power-domains: Should be <&mmcc MDSS_GDSC>. -- clocks: device clocks - See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- clock-names: the following clocks are required: - * "core" - * "iface" - * "mdp_core" - * "pixel" - * "link" -- #clock-cells: The value should be 1. -- vdda-supply: phandle to vdda regulator device node -- lvl-vdd-supply: phandle to regulator device node which is used to supply power - to HPD receiving chip -- panel-en-gpios: GPIO pin to supply power to panel. -- panel-hpd-gpios: GPIO pin used for eDP hpd. - - -Example: - mdss_edp: qcom,mdss_edp@fd923400 { - compatible = "qcom,mdss-edp"; - reg-names = - "edp", - "pll_base"; - reg = <0xfd923400 0x700>, - <0xfd923a00 0xd4>; - interrupt-parent = <&mdss_mdp>; - interrupts = <12 0>; - power-domains = <&mmcc MDSS_GDSC>; - clock-names = - "core", - "pixel", - "iface", - "link", - "mdp_core"; - clocks = - <&mmcc MDSS_EDPAUX_CLK>, - <&mmcc MDSS_EDPPIXEL_CLK>, - <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_EDPLINK_CLK>, - <&mmcc MDSS_MDP_CLK>; - #clock-cells = <1>; - vdda-supply = <&pma8084_l12>; - lvl-vdd-supply = <&lvl_vreg>; - panel-en-gpios = <&tlmm 137 0>; - panel-hpd-gpios = <&tlmm 103 0>; - };