On 11/30/2017 11:02 PM, Nickey Yang wrote:
Hi Archit,
On 2017年10月26日 12:53, Archit Taneja wrote:
On 10/25/2017 09:21 AM, Nickey Yang wrote:
Configure dsi slave channel when driving a panel which needs 2 DSI links.
Signed-off-by: Nickey Yang nickey.yang@rock-chips.com
.../devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt index 6bb59ab..a2bea22 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt @@ -19,6 +19,8 @@ Optional properties: - power-domains: a phandle to mipi dsi power domain node. - resets: list of phandle + reset specifier pairs, as described in [3]. - reset-names: string reset name, must be "apb". +- rockchip,dual-channel: phandle to a 2nd DSI channel, useful as a slave +channel when driving a panel which needs 2 DSI links.
The example below is how dual DSI bindings could look like. Let me know what you think of it.
If both DSI outputs drive the same device (i.e, point to the same panel DT node), then I think it's reasonable enough to assume that the DSIs are operating in a 'dual-channel' mode. That being said, we still need DT to describe which of the DSIs generates the clock for both the channels. This is done with the 'clock-master' DT binding.
Thanks, Archit
mipi_dsi: mipi@ff960000 { ... ...
clock-master; /* implies that this DSI instance drivers the clock * for both the DSIs. */
ports { mipi_in: port { ... ... };
/* add extra output ports for both DSIs */ mipi_out: port { mipi_panel_out: endpoint { remote-endpoint = <&panel_in_channel0>; }; }; };
panel { ... ... /* * panel node can describe its input ports, if both the DSIs output * ports are connected to the same device (i.e, the same DSI panel), * we can assume that the DSIs need to operate in dual DSI mode */ ports { ... port@0 { panel_in_channel0: endpoint { remote-endpoint = <&mipi_panel_out>; }; };
port@1 { panel_in_channel1: endpoint { remote-endpoint = <&mipi1_panel_out>; };
}; }; }; };
mipi_dsi1: mipi@ff968000 { ... ...
ports { mipi1_in: port { ... ... };
mipi1_out: port { mipi1_panel_out: endpoint { remote-endpoint = <&panel_in_channel1>; }; }; }; };
I try to follow as you suggested,use
mipi_dsi: mipi@ff960000 { ... ... clock-master; /* implies that this DSI instance drivers the clock * for both the DSIs. */ ports { mipi_in: port { ... ... }; /* add extra output ports for both DSIs */ mipi_out: port { mipi_panel_out: endpoint { remote-endpoint = <&panel_in_channel0>; }; }; }; panel { ... ... /* * panel node can describe its input ports, if both the DSIs output * ports are connected to the same device (i.e, the same DSI panel), * we can assume that the DSIs need to operate in dual DSI mode */ ports { ... port@0 { panel_in_channel0: endpoint { remote-endpoint = <&mipi_panel_out>; }; }; port@1 { panel_in_channel1: endpoint { remote-endpoint = <&mipi1_panel_out>; };
}; }; }; };
mipi_dsi1: mipi@ff968000 { ... ... ports { mipi1_in: port { ... ... }; mipi1_out: port { mipi1_panel_out: endpoint { remote-endpoint = <&panel_in_channel1>; }; }; }; }
But it seems we can not use of_drm_find_panel(like below)
/* port = of_graph_get_port_by_id(dev->of_node, 1); if (port) { endpoint = of_get_child_by_name(port, "endpoint"); of_node_put(port); if (!endpoint) { dev_err(dev, "no output endpoint found\n"); return -EINVAL; } panel_node = of_graph_get_remote_port_parent(endpoint); of_node_put(endpoint); if (!panel_node) { dev_err(dev, "no output node found\n"); return -EINVAL; } panel = of_drm_find_panel(panel_node); of_node_put(panel_node); if (!panel) return -EPROBE_DEFER; } */ to get DSI1 outputs,because of_drm_find_panel need compare
if (panel->dev->of_node == np)
in dsi_panel driver innolux->base.dev = &innolux->link->dev; dsi->dev
Yes, we should only have 1 drm_panel in the global panel list. Shouldn't it be possible to modify the dsi driver such that dsi1 doesn't care whether it has a drm_panel for it or not, if we are in dual dsi mode?
I imagine a sequence like this:
1. dsi0 probes, parses the of-graph, finds the panel and saves its device node.
2. dsi1 probes, parses the of-graph, find the panel's device node - dsi1 checks if it is the same as the panel attached to dsi0. - If so, it just takes the drm_panel pointer from dsi0. - If not, it tries a of_drm_find_panel() on the panel's device node.
A dual DSI panel driver would also be a bit different. It will be a mipi_dsi_driver with the master DSI (dsi0) as the mipi_dsi_device. Using the of-graph helpers, we would get the device node of dsi1 using of_find_mipi_dsi_host_by_node(), and create another DSI device using mipi_dsi_device_register_full(). Then, we call mipi_dsi_attach() on both the dsi devices.
struct innolux_panel { struct drm_panel base; struct mipi_dsi_device *link; }; It means one panel can only be found in his dsi node,(like dsi0 above).
I'm doubting about it, Or may we follow tegra_dsi_ganged_probe (drivers/gpu/drm/tergra/dsi.c) method.
This method will add a new binding similar to "nvidia,ganged-mode", which is something we don't want to do.
Archit
Thanks, Nickey
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt [2] Documentation/devicetree/bindings/media/video-interfaces.txt