Enable LVDS Panel for Engicam i.Core MX8MMini EDIMM2.2 board.
Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- .../freescale/imx8mm-icore-mx8mm-edimm2.2.dts | 85 +++++++++++++++++++ 1 file changed, 85 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts index a4a2ada14835..58065fee27f6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts @@ -14,9 +14,45 @@ / { compatible = "engicam,icore-mx8mm-edimm2.2", "engicam,icore-mx8mm", "fsl,imx8mm";
+ backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + pwms = <&pwm1 0 1000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + chosen { stdout-path = &uart2; }; + + panel { + compatible = "yes-optoelectronics,ytc700tlag-05-201c"; + backlight = <&backlight>; + + port { + panel_out_bridge: endpoint { + remote-endpoint = <&bridge_out_panel>; + }; + }; + }; +}; + +&dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ports { + port@1 { + reg = <1>; + + dsi_out_bridge: endpoint { + remote-endpoint = <&bridge_in_dsi>; + }; + }; + }; };
&fec1 { @@ -35,9 +71,44 @@ &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; + + bridge@2c { + compatible = "ti,sn65dsi84"; + reg = <0x2c>; + enable-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsi_bridge_enable>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in_dsi: endpoint { + remote-endpoint = <&dsi_out_bridge>; + data-lanes = <0 1>; + }; + }; + + port@2 { + reg = <2>; + bridge_out_panel: endpoint { + remote-endpoint = <&panel_out_bridge>; + }; + }; + }; + }; };
&iomuxc { + pinctrl_dsi_bridge_enable: dsibridgeenablegrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9 0x19 + MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x19 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 @@ -52,6 +123,12 @@ MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 >; };
+ pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x19 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 @@ -77,6 +154,14 @@ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 }; };
+&lcdif { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>;