From: Lin Huang hl@rock-chips.com
Enable the DMC (Dynamic Memory Controller) and the DFI (DDR PHY Interface) nodes on gru/kevin boards so we can support DDR DVFS.
Signed-off-by: Lin Huang hl@rock-chips.com Signed-off-by: Enric Balletbo i Serra enric.balletbo@collabora.com ---
Changes in v1: None
arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 21 ++++++++++++++++++++ arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 +- 2 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index 1da8f7c1501e..7a7dcca11497 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -295,6 +295,12 @@ status = "okay"; };
+&dmc_opp_table { + opp04 { + opp-suspend; + }; +}; + /* * Set some suspend operating points to avoid OVP in suspend * @@ -374,6 +380,10 @@ <200000000>; };
+&display_subsystem { + devfreq = <&dmc>; +}; + &emmc_phy { status = "okay"; }; @@ -495,6 +505,17 @@ ap_i2c_audio: &i2c8 { status = "okay"; };
+&dfi { + status = "okay"; +}; + +&dmc { + status = "okay"; + center-supply = <&ppvar_centerlogic>; + upthreshold = <25>; + downdifferential = <15>; +}; + &sdhci { /* * Signal integrity isn't great at 200 MHz and 150 MHz (DDR) gives the diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index e9d9aa7aa2ac..20b64ca638cb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -128,7 +128,7 @@ }; };
- display-subsystem { + display_subsystem: display-subsystem { compatible = "rockchip,display-subsystem"; ports = <&vopl_out>, <&vopb_out>; };