Move the intel_dsi_clear_device_ready() function to higher up in intel_dsi.c this pairs it with intel_dsi_device_ready(); and pairs intel_dsi_*enable* with intel_dsi_*disable without intel_dsi_clear_device_ready() sitting in the middle of them.
This commit purely moves code around, it does not make any changes what-so-ever.
Signed-off-by: Hans de Goede hdegoede@redhat.com --- drivers/gpu/drm/i915/intel_dsi.c | 86 ++++++++++++++++++++-------------------- 1 file changed, 43 insertions(+), 43 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index cb15c0a..2222229 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -445,6 +445,49 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder) bxt_dsi_device_ready(encoder); }
+static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + enum port port; + + DRM_DEBUG_KMS("\n"); + for_each_dsi_port(port, intel_dsi->ports) { + /* Common bit for both MIPI Port A & MIPI Port C on VLV/CHV */ + i915_reg_t port_ctrl = IS_BROXTON(dev_priv) ? + BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(PORT_A); + u32 val; + + I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY | + ULPS_STATE_ENTER); + usleep_range(2000, 2500); + + I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY | + ULPS_STATE_EXIT); + usleep_range(2000, 2500); + + I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY | + ULPS_STATE_ENTER); + usleep_range(2000, 2500); + + /* Wait till Clock lanes are in LP-00 state for MIPI Port A + * only. MIPI Port C has no similar bit for checking + */ + if (intel_wait_for_register(dev_priv, + port_ctrl, AFE_LATCHOUT, 0, + 30)) + DRM_ERROR("DSI LP not going Low\n"); + + /* Disable MIPI PHY transparent latch */ + val = I915_READ(port_ctrl); + I915_WRITE(port_ctrl, val & ~LP_OUTPUT_HOLD); + usleep_range(1000, 1500); + + I915_WRITE(MIPI_DEVICE_READY(port), 0x00); + usleep_range(2000, 2500); + } +} + static void intel_dsi_port_enable(struct intel_encoder *encoder) { struct drm_device *dev = encoder->base.dev; @@ -601,49 +644,6 @@ static void intel_dsi_pre_disable(struct intel_encoder *encoder, } }
-static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) -{ - struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); - struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); - enum port port; - - DRM_DEBUG_KMS("\n"); - for_each_dsi_port(port, intel_dsi->ports) { - /* Common bit for both MIPI Port A & MIPI Port C on VLV/CHV */ - i915_reg_t port_ctrl = IS_BROXTON(dev_priv) ? - BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(PORT_A); - u32 val; - - I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY | - ULPS_STATE_ENTER); - usleep_range(2000, 2500); - - I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY | - ULPS_STATE_EXIT); - usleep_range(2000, 2500); - - I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY | - ULPS_STATE_ENTER); - usleep_range(2000, 2500); - - /* Wait till Clock lanes are in LP-00 state for MIPI Port A - * only. MIPI Port C has no similar bit for checking - */ - if (intel_wait_for_register(dev_priv, - port_ctrl, AFE_LATCHOUT, 0, - 30)) - DRM_ERROR("DSI LP not going Low\n"); - - /* Disable MIPI PHY transparent latch */ - val = I915_READ(port_ctrl); - I915_WRITE(port_ctrl, val & ~LP_OUTPUT_HOLD); - usleep_range(1000, 1500); - - I915_WRITE(MIPI_DEVICE_READY(port), 0x00); - usleep_range(2000, 2500); - } -} - static void intel_dsi_post_disable(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config, struct drm_connector_state *conn_state)