This mux is supposed to select a fitting divider after the PLL is already set to the correct rate.
Signed-off-by: Philipp Zabel p.zabel@pengutronix.de Acked-by: James Liao jamesjj.liao@mediatek.com Acked-by: Stephen Boyd sboyd@codeaurora.org --- drivers/clk/mediatek/clk-mt8173.c | 6 +++++- drivers/clk/mediatek/clk-mtk.h | 15 +++++++++++++-- 2 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c index 227e356..85c0bfc 100644 --- a/drivers/clk/mediatek/clk-mt8173.c +++ b/drivers/clk/mediatek/clk-mt8173.c @@ -558,7 +558,11 @@ static const struct mtk_composite top_muxes[] __initconst = { MUX_GATE(CLK_TOP_ATB_SEL, "atb_sel", atb_parents, 0x0090, 16, 2, 23), MUX_GATE(CLK_TOP_VENC_LT_SEL, "venclt_sel", venc_lt_parents, 0x0090, 24, 4, 31), /* CLK_CFG_6 */ - MUX_GATE(CLK_TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x00a0, 0, 3, 7), + /* + * The dpi0_sel clock should not propagate rate changes to its parent + * clock so the dpi driver can have full control over PLL and divider. + */ + MUX_GATE_FLAGS(CLK_TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x00a0, 0, 3, 7, 0), MUX_GATE(CLK_TOP_IRDA_SEL, "irda_sel", irda_parents, 0x00a0, 8, 2, 15), MUX_GATE(CLK_TOP_CCI400_SEL, "cci400_sel", cci400_parents, 0x00a0, 16, 3, 23), MUX_GATE(CLK_TOP_AUD_1_SEL, "aud_1_sel", aud_1_parents, 0x00a0, 24, 2, 31), diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h index 32d2e45..9f24fcf 100644 --- a/drivers/clk/mediatek/clk-mtk.h +++ b/drivers/clk/mediatek/clk-mtk.h @@ -83,7 +83,11 @@ struct mtk_composite { signed char num_parents; };
-#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate) { \ +/* + * In case the rate change propagation to parent clocks is undesirable, + * this macro allows to specify the clock flags manually. + */ +#define MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, _gate, _flags) { \ .id = _id, \ .name = _name, \ .mux_reg = _reg, \ @@ -94,9 +98,16 @@ struct mtk_composite { .divider_shift = -1, \ .parent_names = _parents, \ .num_parents = ARRAY_SIZE(_parents), \ - .flags = CLK_SET_RATE_PARENT, \ + .flags = _flags, \ }
+/* + * Unless necessary, all MUX_GATE clocks propagate rate changes to their + * parent clock by default. + */ +#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate) \ + MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, _gate, CLK_SET_RATE_PARENT) + #define MUX(_id, _name, _parents, _reg, _shift, _width) { \ .id = _id, \ .name = _name, \