Hello,
This series adds a ssd130x-spi driver that provides a 4-wire SPI transport support for SSD130x OLED controllers that can be accessed over a SPI bus.
The driver is quite similar to existing ssd130x-i2c driver that is used by I2C controllers, but there is a difference in the protocol used by SSD130x depending on the transport used. The details are in patch #4 description.
Patch #1 just makes the current ssd130x-i2c compatible strings in the DT binding to be deprecated, and add new ones that don't have an "fb-i2c".
Patch #2 extends the DT binding with the properties needed to support SPI.
Patch #3 adds the new compatible strings to the OF device ID table in the ssd130x-i2c DRM driver and deprecate the old ones.
Patch #4 moves the device info for the different SSD130x variants from the ssd130x-i2c transport driver to the ssd130x core driver.
Finally patch #5 adds the ssd130x-spi DRM driver for the OLED controllers that come with a 4-wire SPI interface, instead of an I2C interface.
This is a v3 that addresses the issues pointed out in v2.
Best regards, Javier
Changes in v3: - Drop the "sinowealth,sh1106-i2c", wasn't in a released version (Chen-Yu Tsai) - Continue enforcing required properties for deprecated strings (Maxime Ripard) - Add a comment to the properties required for SPI (Geert Uytterhoeven) - Drop the "sinowealth,sh1106-i2c", wasn't in a released version (Chen-Yu Tsai) - s/it/they in the commit description (Geert Uytterhoeven) - Drop unnecessary blank line (Geert Uytterhoeven) - Export variants array and use &info[ID] in device table (Andy Shevchenko) - Drop ssd130x_spi_get_dc() helper and open code it (Geert Uytterhoeven) - Export variants array and use &info[ID] in device table (Andy Shevchenko) - Add Geert Uytterhoeven's Reviewed-by tag to patches.
Changes in v2: - Drop the -i2c suffixes from the compatible strings too (Geert Uytterhoeven) - Don't add compatible strings with an "-spi" suffix (Geert Uytterhoeven) - Use the compatible strings that don't have "fb-i2c" (Geert Uytterhoeven). - Drop ssd13x_variant_to_info() and just use the array index (Neil Armstrong). - Add the same compatible strings than I2C (Geert Uytterhoeven) - Add Mark Brown's Acked-by tag to all patches.
Javier Martinez Canillas (5): dt-bindings: display: ssd1307fb: Deprecate "-i2c" compatible strings dt-bindings: display: ssd1307fb: Extend schema for SPI controllers drm/solomon: Add ssd130x new compatible strings and deprecate old ones. drm/solomon: Move device info from ssd130x-i2c to the core driver drm/solomon: Add SSD130x OLED displays SPI support
.../bindings/display/solomon,ssd1307fb.yaml | 82 ++++++-- drivers/gpu/drm/solomon/Kconfig | 9 + drivers/gpu/drm/solomon/Makefile | 1 + drivers/gpu/drm/solomon/ssd130x-i2c.c | 62 +++--- drivers/gpu/drm/solomon/ssd130x-spi.c | 177 ++++++++++++++++++ drivers/gpu/drm/solomon/ssd130x.c | 36 +++- drivers/gpu/drm/solomon/ssd130x.h | 14 ++ 7 files changed, 324 insertions(+), 57 deletions(-) create mode 100644 drivers/gpu/drm/solomon/ssd130x-spi.c