From: Claudiu Beznea claudiu.beznea@microchip.com
SAM9x60 LCD Controller has no option to select clock source as previous controllers have. To be able to use the same driver even for this LCD controller add a config option to know if controller supports this.
Signed-off-by: Claudiu Beznea claudiu.beznea@microchip.com Reviewed-by: Sam Ravnborg sam@ravnborg.org --- drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 12 +++++++----- drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h | 2 ++ 2 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c index 8070a558d7b1..957e6d2fb00f 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c @@ -78,7 +78,8 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c) unsigned long mode_rate; struct videomode vm; unsigned long prate; - unsigned int cfg; + unsigned int mask = ATMEL_HLCDC_CLKDIV_MASK | ATMEL_HLCDC_CLKPOL; + unsigned int cfg = 0; int div;
vm.vfront_porch = adj->crtc_vsync_start - adj->crtc_vdisplay; @@ -101,7 +102,10 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c) (adj->crtc_hdisplay - 1) | ((adj->crtc_vdisplay - 1) << 16));
- cfg = ATMEL_HLCDC_CLKSEL; + if (!crtc->dc->desc->fixed_clksrc) { + cfg |= ATMEL_HLCDC_CLKSEL; + mask |= ATMEL_HLCDC_CLKSEL; + }
prate = 2 * clk_get_rate(crtc->dc->hlcdc->sys_clk); mode_rate = adj->crtc_clock * 1000; @@ -132,9 +136,7 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
cfg |= ATMEL_HLCDC_CLKDIV(div);
- regmap_update_bits(regmap, ATMEL_HLCDC_CFG(0), - ATMEL_HLCDC_CLKSEL | ATMEL_HLCDC_CLKDIV_MASK | - ATMEL_HLCDC_CLKPOL, cfg); + regmap_update_bits(regmap, ATMEL_HLCDC_CFG(0), mask, cfg);
cfg = 0;
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h index 70bd540d644e..0155efb9c443 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h @@ -328,6 +328,7 @@ atmel_hlcdc_layer_to_plane(struct atmel_hlcdc_layer *layer) * @max_hpw: maximum horizontal back/front porch width * @conflicting_output_formats: true if RGBXXX output formats conflict with * each other. + * @fixed_clksrc: true if clock source is fixed * @layers: a layer description table describing available layers * @nlayers: layer description table size */ @@ -340,6 +341,7 @@ struct atmel_hlcdc_dc_desc { int max_vpw; int max_hpw; bool conflicting_output_formats; + bool fixed_clksrc; const struct atmel_hlcdc_layer_desc *layers; int nlayers; };