Read calibration data from nvmem, and config mipitx impedance with calibration data to make sure their impedance are 100ohm.
Signed-off-by: Jitao Shi jitao.shi@mediatek.com --- drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c index e4cc967750cb..0f87cd3d1d7d 100644 --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c @@ -5,6 +5,8 @@ */
#include "mtk_mipi_tx.h" +#include <linux/nvmem-consumer.h> +#include <linux/slab.h>
#define MIPITX_LANE_CON 0x000c #define RG_DSI_CPHY_T1DRV_EN BIT(0) @@ -28,6 +30,7 @@ #define MIPITX_PLL_CON4 0x003c #define RG_DSI_PLL_IBIAS (3 << 10)
+#define MIPITX_D2P_RTCODE 0x0100 #define MIPITX_D2_SW_CTL_EN 0x0144 #define MIPITX_D0_SW_CTL_EN 0x0244 #define MIPITX_CK_CKMODE_EN 0x0328 @@ -108,6 +111,58 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = { .recalc_rate = mtk_mipi_tx_pll_recalc_rate, };
+static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx) +{ + u32 *buf; + u32 rt_code[5]; + int i, j; + struct nvmem_cell *cell; + struct device *dev = mipi_tx->dev; + size_t len; + + cell = nvmem_cell_get(dev, "calibration-data"); + if (IS_ERR(cell)) { + dev_info(dev, "nvmem_cell_get fail\n"); + return; + } + + buf = (u32 *)nvmem_cell_read(cell, &len); + + nvmem_cell_put(cell); + + if (IS_ERR(buf)) { + dev_info(dev, "can't get data\n"); + return; + } + + if (len < 3 * sizeof(u32)) { + dev_info(dev, "invalid calibration data\n"); + kfree(buf); + return; + } + + rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) | (buf[0] >> 11 & 0x1f); + rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) | (buf[0] >> 1 & 0x1f); + rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) | (buf[1] >> 22 & 0x1f); + rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) | (buf[1] >> 12 & 0x1f); + rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) | (buf[1] >> 2 & 0x1f); + + for (i = 0; i < 5; i++) { + if ((rt_code[i] & 0x1f) == 0) + rt_code[i] |= 0x10; + + if ((rt_code[i] >> 5 & 0x1f) == 0) + rt_code[i] |= 0x10 << 5; + + for (j = 0; j < 10; j++) + mtk_mipi_tx_update_bits(mipi_tx, + MIPITX_D2P_RTCODE * (i + 1) + j * 4, + 1, rt_code[i] >> j & 1); + } + + kfree(buf); +} + static void mtk_mipi_tx_power_on_signal(struct phy *phy) { struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy); @@ -130,6 +185,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy) RG_DSI_HSTX_LDO_REF_SEL, (mipi_tx->mipitx_drive - 3000) / 200 << 6);
+ mtk_mipi_tx_config_calibration_data(mipi_tx); + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN); }