Unlike hblk, the vblk timings should follow an equation to compute the desired value for lane 4 devices and rest of devices it would be 0.
BSP code from BPI-M64-bsp is computing vblk as for 4-lane devices (from linux-sunxi drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)
tmp = (ht*dsi_pixel_bits[format]/8)*vt-(4+dsi_hblk+2); dsi_vblk = (lane-tmp%lane);
So, update the vblk timing calculation accordingly.
Tested on 2-lane, 4-lane MIPI-DSI LCD panels.
Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 29 +++++++++++++++++++------- 1 file changed, 22 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c index d8947be92f9d..cbcef7bf7681 100644 --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c @@ -355,6 +355,27 @@ static void sun6i_dsi_inst_init(struct sun6i_dsi *dsi, SUN6I_DSI_INST_JUMP_CFG_NUM(1)); };
+static u16 sun6i_dsi_get_timings_vblk(struct sun6i_dsi *dsi, + struct drm_display_mode *mode, u16 hblk) +{ + struct mipi_dsi_device *device = dsi->device; + unsigned int Bpp = mipi_dsi_pixel_format_to_bpp(device->format) / 8; + int tmp; + + if (device->lanes != 4) + return 0; + + /* + * The vertical blank is set using a blanking packet (4 bytes + + * payload + 2 bytes). Its minimal size is therefore 6 bytes + */ +#define VBLK_PACKET_OVERHEAD 6 + tmp = (mode->htotal * Bpp) * mode->vtotal - + (hblk + VBLK_PACKET_OVERHEAD); + + return (device->lanes - tmp % device->lanes); +} + static u16 sun6i_dsi_get_video_start_delay(struct sun6i_dsi *dsi, struct drm_display_mode *mode) { @@ -503,13 +524,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi, (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp - HBLK_PACKET_OVERHEAD);
- /* - * And I'm not entirely sure what vblk is about. The driver in - * Allwinner BSP is using a rather convoluted calculation - * there only for 4 lanes. However, using 0 (the !4 lanes - * case) even with a 4 lanes screen seems to work... - */ - vblk = 0; + vblk = sun6i_dsi_get_timings_vblk(dsi, mode, hblk);
/* How many bytes do we need to send all payloads? */ bytes = max_t(size_t, max(max(hfp, hblk), max(hsa, hbp)), vblk);