ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone.
It has a flexible configuration of MIPI DSI signal input and produce RGB565, RGB666, RGB888 output format.
Add bridge driver for it.
Signed-off-by: Jagan Teki jagan@amarulasolutions.com Reviewed-by: Robert Foss robert.foss@linaro.org --- Changes for v5: - rebase drm-misc-next - collect Robert review tags Changes for v4: - added regulators - replace reset with EN - fixed warnings pointed by Robert Changes for v3: - updated the driver to inline with new drm bridge style
MAINTAINERS | 1 + drivers/gpu/drm/bridge/Kconfig | 13 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/chipone-icn6211.c | 293 +++++++++++++++++++++++ 4 files changed, 308 insertions(+) create mode 100644 drivers/gpu/drm/bridge/chipone-icn6211.c
diff --git a/MAINTAINERS b/MAINTAINERS index b9d11101d060..b92a35c80eae 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5572,6 +5572,7 @@ DRM DRIVER FOR CHIPONE ICN6211 MIPI-DSI to RGB CONVERTER BRIDGE M: Jagan Teki jagan@amarulasolutions.com S: Maintained F: Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml +F: drivers/gpu/drm/bridge/chipone-icn6211.c
DRM DRIVER FOR FARADAY TVE200 TV ENCODER M: Linus Walleij linus.walleij@linaro.org diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index e4110d6ca7b3..330ee70ed746 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -27,6 +27,19 @@ config DRM_CDNS_DSI Support Cadence DPI to DSI bridge. This is an internal bridge and is meant to be directly embedded in a SoC.
+config DRM_CHIPONE_ICN6211 + tristate "Chipone ICN6211 MIPI-DSI/RGB Converter bridge" + depends on OF + select DRM_MIPI_DSI + select DRM_PANEL_BRIDGE + help + ICN6211 is MIPI-DSI/RGB Converter bridge from chipone. + + It has a flexible configuration of MIPI DSI signal input + and produce RGB565, RGB666, RGB888 output format. + + If in doubt, say "N". + config DRM_CHRONTEL_CH7033 tristate "Chrontel CH7033 Video Encoder" depends on OF diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index 86e7acc76f8d..3eb84b638988 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o +obj-$(CONFIG_DRM_CHIPONE_ICN6211) += chipone-icn6211.o obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o obj-$(CONFIG_DRM_LONTIUM_LT9611) += lontium-lt9611.o diff --git a/drivers/gpu/drm/bridge/chipone-icn6211.c b/drivers/gpu/drm/bridge/chipone-icn6211.c new file mode 100644 index 000000000000..a6151db95586 --- /dev/null +++ b/drivers/gpu/drm/bridge/chipone-icn6211.c @@ -0,0 +1,293 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Amarula Solutions(India) + * Author: Jagan Teki jagan@amarulasolutions.com + */ + +#include <drm/drm_of.h> +#include <drm/drm_print.h> +#include <drm/drm_mipi_dsi.h> + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regulator/consumer.h> + +#include <video/mipi_display.h> + +#define HACTIVE_LI 0x20 +#define VACTIVE_LI 0x21 +#define VACTIVE_HACTIVE_HI 0x22 +#define HFP_LI 0x23 +#define HSYNC_LI 0x24 +#define HBP_LI 0x25 +#define HFP_HSW_HBP_HI 0x26 +#define VFP 0x27 +#define VSYNC 0x28 +#define VBP 0x29 + +struct chipone { + struct device *dev; + struct drm_bridge bridge; + struct drm_bridge *panel_bridge; + struct gpio_desc *enable_gpio; + struct regulator *vdd1; + struct regulator *vdd2; + struct regulator *vdd3; +}; + +static inline struct chipone *bridge_to_chipone(struct drm_bridge *bridge) +{ + return container_of(bridge, struct chipone, bridge); +} + +static struct drm_display_mode *bridge_to_mode(struct drm_bridge *bridge) +{ + return &bridge->encoder->crtc->state->adjusted_mode; +} + +static inline int chipone_dsi_write(struct chipone *icn, const void *seq, + size_t len) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(icn->dev); + + return mipi_dsi_generic_write(dsi, seq, len); +} + +#define ICN6211_DSI(icn, seq...) \ + { \ + const u8 d[] = { seq }; \ + chipone_dsi_write(icn, d, ARRAY_SIZE(d)); \ + } + +static void chipone_enable(struct drm_bridge *bridge) +{ + struct chipone *icn = bridge_to_chipone(bridge); + struct drm_display_mode *mode = bridge_to_mode(bridge); + + ICN6211_DSI(icn, 0x7a, 0xc1); + + ICN6211_DSI(icn, HACTIVE_LI, mode->hdisplay & 0xff); + + ICN6211_DSI(icn, VACTIVE_LI, mode->vdisplay & 0xff); + + /** + * lsb nibble: 2nd nibble of hdisplay + * msb nibble: 2nd nibble of vdisplay + */ + ICN6211_DSI(icn, VACTIVE_HACTIVE_HI, + ((mode->hdisplay >> 8) & 0xf) | + (((mode->vdisplay >> 8) & 0xf) << 4)); + + ICN6211_DSI(icn, HFP_LI, mode->hsync_start - mode->hdisplay); + + ICN6211_DSI(icn, HSYNC_LI, mode->hsync_end - mode->hsync_start); + + ICN6211_DSI(icn, HBP_LI, mode->htotal - mode->hsync_end); + + ICN6211_DSI(icn, HFP_HSW_HBP_HI, 0x00); + + ICN6211_DSI(icn, VFP, mode->vsync_start - mode->vdisplay); + + ICN6211_DSI(icn, VSYNC, mode->vsync_end - mode->vsync_start); + + ICN6211_DSI(icn, VBP, mode->vtotal - mode->vsync_end); + + /* dsi specific sequence */ + ICN6211_DSI(icn, MIPI_DCS_SET_TEAR_OFF, 0x80); + ICN6211_DSI(icn, MIPI_DCS_SET_ADDRESS_MODE, 0x28); + ICN6211_DSI(icn, 0xb5, 0xa0); + ICN6211_DSI(icn, 0x5c, 0xff); + ICN6211_DSI(icn, MIPI_DCS_SET_COLUMN_ADDRESS, 0x01); + ICN6211_DSI(icn, MIPI_DCS_GET_POWER_SAVE, 0x92); + ICN6211_DSI(icn, 0x6b, 0x71); + ICN6211_DSI(icn, 0x69, 0x2b); + ICN6211_DSI(icn, MIPI_DCS_ENTER_SLEEP_MODE, 0x40); + ICN6211_DSI(icn, MIPI_DCS_EXIT_SLEEP_MODE, 0x98); + + /* icn6211 specific sequence */ + ICN6211_DSI(icn, 0xb6, 0x20); + ICN6211_DSI(icn, 0x51, 0x20); + ICN6211_DSI(icn, 0x09, 0x10); + + usleep_range(10000, 11000); +} + +static void chipone_pre_enable(struct drm_bridge *bridge) +{ + struct chipone *icn = bridge_to_chipone(bridge); + int ret; + + if (icn->vdd1) { + ret = regulator_enable(icn->vdd1); + if (ret) + DRM_DEV_ERROR(icn->dev, + "failed to enable VDD1 regulator: %d\n", ret); + } + + if (icn->vdd2) { + ret = regulator_enable(icn->vdd2); + if (ret) + DRM_DEV_ERROR(icn->dev, + "failed to enable VDD2 regulator: %d\n", ret); + } + + if (icn->vdd3) { + ret = regulator_enable(icn->vdd3); + if (ret) + DRM_DEV_ERROR(icn->dev, + "failed to enable VDD3 regulator: %d\n", ret); + } + + gpiod_set_value(icn->enable_gpio, 1); + + usleep_range(10000, 11000); +} + +static void chipone_post_disable(struct drm_bridge *bridge) +{ + struct chipone *icn = bridge_to_chipone(bridge); + + if (icn->vdd1) + regulator_disable(icn->vdd1); + + if (icn->vdd2) + regulator_disable(icn->vdd2); + + if (icn->vdd3) + regulator_disable(icn->vdd3); + + gpiod_set_value(icn->enable_gpio, 0); +} + +static int chipone_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags) +{ + struct chipone *icn = bridge_to_chipone(bridge); + + return drm_bridge_attach(bridge->encoder, icn->panel_bridge, bridge, flags); +} + +static const struct drm_bridge_funcs chipone_bridge_funcs = { + .attach = chipone_attach, + .post_disable = chipone_post_disable, + .pre_enable = chipone_pre_enable, + .enable = chipone_enable, +}; + +static int chipone_parse_dt(struct chipone *icn) +{ + struct device *dev = icn->dev; + struct drm_panel *panel; + int ret; + + icn->vdd1 = devm_regulator_get_optional(dev, "vdd1"); + if (IS_ERR(icn->vdd1)) { + ret = PTR_ERR(icn->vdd1); + if (ret == -EPROBE_DEFER) + return -EPROBE_DEFER; + icn->vdd1 = NULL; + DRM_DEV_DEBUG(dev, "failed to get VDD1 regulator: %d\n", ret); + } + + icn->vdd2 = devm_regulator_get_optional(dev, "vdd2"); + if (IS_ERR(icn->vdd2)) { + ret = PTR_ERR(icn->vdd2); + if (ret == -EPROBE_DEFER) + return -EPROBE_DEFER; + icn->vdd2 = NULL; + DRM_DEV_DEBUG(dev, "failed to get VDD2 regulator: %d\n", ret); + } + + icn->vdd3 = devm_regulator_get_optional(dev, "vdd3"); + if (IS_ERR(icn->vdd3)) { + ret = PTR_ERR(icn->vdd3); + if (ret == -EPROBE_DEFER) + return -EPROBE_DEFER; + icn->vdd3 = NULL; + DRM_DEV_DEBUG(dev, "failed to get VDD3 regulator: %d\n", ret); + } + + icn->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); + if (IS_ERR(icn->enable_gpio)) { + DRM_DEV_ERROR(dev, "failed to get enable GPIO\n"); + return PTR_ERR(icn->enable_gpio); + } + + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL); + if (ret) + return ret; + + icn->panel_bridge = devm_drm_panel_bridge_add(dev, panel); + if (IS_ERR(icn->panel_bridge)) + return PTR_ERR(icn->panel_bridge); + + return 0; +} + +static int chipone_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct chipone *icn; + int ret; + + icn = devm_kzalloc(dev, sizeof(struct chipone), GFP_KERNEL); + if (!icn) + return -ENOMEM; + + mipi_dsi_set_drvdata(dsi, icn); + icn->dev = dev; + + ret = chipone_parse_dt(icn); + if (ret) + return ret; + + icn->bridge.funcs = &chipone_bridge_funcs; + icn->bridge.type = DRM_MODE_CONNECTOR_DPI; + icn->bridge.of_node = dev->of_node; + + drm_bridge_add(&icn->bridge); + + dsi->lanes = 4; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE; + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + drm_bridge_remove(&icn->bridge); + dev_err(dev, "failed to attach dsi\n"); + } + + return ret; +} + +static int chipone_remove(struct mipi_dsi_device *dsi) +{ + struct chipone *icn = mipi_dsi_get_drvdata(dsi); + + mipi_dsi_detach(dsi); + drm_bridge_remove(&icn->bridge); + + return 0; +} + +static const struct of_device_id chipone_of_match[] = { + { .compatible = "chipone,icn6211", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, chipone_of_match); + +static struct mipi_dsi_driver chipone_driver = { + .probe = chipone_probe, + .remove = chipone_remove, + .driver = { + .name = "chipone-icn6211", + .owner = THIS_MODULE, + .of_match_table = chipone_of_match, + }, +}; +module_mipi_dsi_driver(chipone_driver); + +MODULE_AUTHOR("Jagan Teki jagan@amarulasolutions.com"); +MODULE_DESCRIPTION("Chipone ICN6211 MIPI-DSI to RGB Converter Bridge"); +MODULE_LICENSE("GPL");