The OnSemi FIN3385 Parallel-to-LVDS encoder has a dedicated input line to select input pixel data sampling edge. Add DT property "pclk-sample", not the same as the one used by display timings but rather the same as used by media, and configure bus flags based on this DT property.
Signed-off-by: Marek Vasut marex@denx.de Cc: Alexandre Torgue alexandre.torgue@st.com Cc: Andrzej Hajda a.hajda@samsung.com Cc: Antonio Borneo antonio.borneo@st.com Cc: Benjamin Gaignard benjamin.gaignard@st.com Cc: Biju Das biju.das.jz@bp.renesas.com Cc: Laurent Pinchart laurent.pinchart@ideasonboard.com Cc: Maxime Coquelin mcoquelin.stm32@gmail.com Cc: Philippe Cornu philippe.cornu@st.com Cc: Sam Ravnborg sam@ravnborg.org Cc: Vincent Abriou vincent.abriou@st.com Cc: Yannick Fertre yannick.fertre@st.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com To: dri-devel@lists.freedesktop.org --- V2: - Limit the pixelclk-active to encoders only - Update DT binding document V3: - Determine whether this is encoder from connector, i.e. lvds_codec->connector_type == DRM_MODE_CONNECTOR_LVDS V4: - Switch to pclk-sample. Note that the value of this is inverted, so all the existing users of pixelclk-active using previous version of this patch must be reworked V5: - Move pclk-sample to endpoint. Again, all existing users of the bindings must be reworked --- drivers/gpu/drm/bridge/lvds-codec.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
diff --git a/drivers/gpu/drm/bridge/lvds-codec.c b/drivers/gpu/drm/bridge/lvds-codec.c index dcf579a4cf833..80ce6783d10a8 100644 --- a/drivers/gpu/drm/bridge/lvds-codec.c +++ b/drivers/gpu/drm/bridge/lvds-codec.c @@ -19,6 +19,7 @@ struct lvds_codec { struct device *dev; struct drm_bridge bridge; struct drm_bridge *panel_bridge; + struct drm_bridge_timings timings; struct regulator *vcc; struct gpio_desc *powerdown_gpio; u32 connector_type; @@ -78,8 +79,10 @@ static int lvds_codec_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *panel_node; + struct device_node *bus_node; struct drm_panel *panel; struct lvds_codec *lvds_codec; + u32 val;
lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL); if (!lvds_codec) @@ -119,6 +122,27 @@ static int lvds_codec_probe(struct platform_device *pdev) if (IS_ERR(lvds_codec->panel_bridge)) return PTR_ERR(lvds_codec->panel_bridge);
+ /* + * Encoder might sample data on different clock edge than the display, + * for example OnSemi FIN3385 has a dedicated strapping pin to select + * the sampling edge. + */ + if (lvds_codec->connector_type == DRM_MODE_CONNECTOR_LVDS) { + bus_node = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0); + if (!bus_node) { + dev_dbg(dev, "bus DT node not found\n"); + return -ENXIO; + } + + if (!of_property_read_u32(dev->of_node, "pclk-sample", &val)) { + lvds_codec->timings.input_bus_flags = val ? + DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE : + DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE; + } + + of_node_put(bus_node); + } + /* * The panel_bridge bridge is attached to the panel's of_node, * but we need a bridge attached to our of_node for our user @@ -126,6 +150,7 @@ static int lvds_codec_probe(struct platform_device *pdev) */ lvds_codec->bridge.of_node = dev->of_node; lvds_codec->bridge.funcs = &funcs; + lvds_codec->bridge.timings = &lvds_codec->timings; drm_bridge_add(&lvds_codec->bridge);
platform_set_drvdata(pdev, lvds_codec);