Hi,
This serie introduces the support for the NextThing GR8.
This SoC is loosely based on the SoCs of the Allwinner sun5i family, hence we can use most of the support already there. Compared to the already existing A10s and A13/R8, the pin layout completely changed, meaning that also the set of available controllers is changed.
There's some new controllers (SPDIF) and some are gone (Ethernet). This also introduces the support for the GR8 Evaluation Board.
Even though it's not been tested yet, the SPDIF and I2S-related components have been listed but we do not create a card from them, so they won't be usable.
Let me know if you have any questions, Maxime
Maxime Ripard (3): backlight: pwm_bl: Handle gpio that can sleep drm/panel: simple: Add A10 EVB 5 inch panel support ARM: sunxi: Support the Nextthing GR8
Mylène Josserand (3): pinctrl: sunxi: Add GR8 controller support ARM: dts: Add NextThing GR8 dtsi ARM: dts: gr8: Add support for the GR8 evaluation board
Documentation/devicetree/bindings/arm/sunxi.txt | 1 + .../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 1 + MAINTAINERS | 1 + arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/gr8-evb.dts | 378 +++++++ arch/arm/boot/dts/gr8.dtsi | 1080 ++++++++++++++++++++ arch/arm/mach-sunxi/sunxi.c | 1 + drivers/gpu/drm/panel/panel-simple.c | 26 + drivers/pinctrl/sunxi/Kconfig | 4 + drivers/pinctrl/sunxi/Makefile | 1 + drivers/pinctrl/sunxi/pinctrl-gr8.c | 541 ++++++++++ drivers/video/backlight/pwm_bl.c | 4 +- 12 files changed, 2038 insertions(+), 3 deletions(-) create mode 100644 arch/arm/boot/dts/gr8-evb.dts create mode 100644 arch/arm/boot/dts/gr8.dtsi create mode 100644 drivers/pinctrl/sunxi/pinctrl-gr8.c