The patch adds bindings required to add support for parallel output.
Signed-off-by: Andrzej Hajda a.hajda@samsung.com --- Documentation/devicetree/bindings/video/samsung-fimd.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/Documentation/devicetree/bindings/video/samsung-fimd.txt b/Documentation/devicetree/bindings/video/samsung-fimd.txt index 36b7895..2dad41b 100644 --- a/Documentation/devicetree/bindings/video/samsung-fimd.txt +++ b/Documentation/devicetree/bindings/video/samsung-fimd.txt @@ -41,6 +41,21 @@ Optional Properties: - samsung,power-domain: a phandle to FIMD power domain node. - samsung,invert-vden: video enable signal is inverted - samsung,invert-vclk: video clock signal is inverted +- display-timings: timing settings for FIMD, as described in document [1]. + Can be used in case timings cannot be provided otherwise + or to override timings provided by the panel. + +The device node can contain 'port' child nodes according to the bindings defined +in [2]. The following are properties specific to those nodes: +- reg: (required) port index, can be: + 0 - for CAMIF0 input, + 1 - for CAMIF1 input, + 2 - for CAMIF2 input, + 3 - for parallel output, + 4 - for write-back interface + +[1]: Documentation/devicetree/bindings/video/display-timing.txt +[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
Example: