dsi2lvds tc358775 bridge driver added Tested in apq8016, ifc6309 board and panel auo,b101xtn01
Signed-off-by: Vinay Simha BN simhavcs@gmail.com --- .../bindings/display/bridge/toshiba,tc358775.txt | 106 ++++ drivers/gpu/drm/bridge/Kconfig | 10 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/tc358775.c | 687 +++++++++++++++++++++ 4 files changed, 804 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.txt create mode 100644 drivers/gpu/drm/bridge/tc358775.c
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.txt new file mode 100644 index 0000000..c4c364d --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.txt @@ -0,0 +1,106 @@ +Toshiba TC358775 DSI to LVDS bridge bindings + +Required properties: + - compatible: "toshiba,tc358775" + - reg: i2c address of the bridge, 0x0f + - tc, dsi-lanes: Number of DSI data lanes connected to the DSI host. It should + be one of 1, 2, 3 or 4. + - tc, dual-link : To configure the LVDS transmitter either + as single-link or dual-link. + - tc, data-format: To configure the data formats + 0 for VESA standard, 1 for JEIDA standard + - vdd-supply: 1.2V LVDS Power Supply + - vddio-supply: 1.8V IO Power Supply + - stby-gpios: Standby pin, Low active + - reset-gpios: Hardware reset, Low active + +Required nodes: + +The TC358775 has two ports. Their connections are modelled using the OF +graph bindings specified in Documentation/devicetree/bindings/graph.txt. + +- Video port 0 for the DSI input. The remote endpoint phandle should be a + reference to a valid mipi_dsi_host device node. +- Video port 1 for the LVDS output. + +Example: + + i2c@78b8000 { + /* On High speed expansion */ + label = "HS-I2C2"; + status = "okay"; + + tc_bridge: bridge@f { + status = "okay"; + + compatible = "toshiba,tc358775"; + reg = <0x0f>; + + tc,dsi-lanes = <4>; + tc,dual-link = <0>; + tc,data-format = <1>; + + vdd-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; + + stby-gpio = <&msmgpio 99 GPIO_ACTIVE_LOW>; + reset-gpio = <&msmgpio 72 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + d2l_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + d2l_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + }; + + panel: auo,b101xtn01 { + status = "okay"; + compatible = "auo,b101xtn01"; + power-supply = <&pm8916_l14>; + + port { + panel_in: endpoint { + remote-endpoint = <&d2l_out>; + }; + }; + }; + + mdss@1a00000 { + status = "okay"; + + mdp@1a01000 { + status = "okay"; + }; + + dsi@1a98000 { + status = "okay"; + .. + ports { + port@1 { + dsi0_out: endpoint { + remote-endpoint = <&d2l_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; + + dsi-phy@1a98300 { + status = "okay"; + .. + }; + }; diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 8397bf7..d5528fa 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -133,6 +133,16 @@ config DRM_TOSHIBA_TC358767 ---help--- Toshiba TC358767 eDP bridge chip driver.
+config DRM_TOSHIBA_TC358775 + tristate "Toshiba TC358775 LVDS bridge" + depends on OF + select DRM_KMS_HELPER + select REGMAP_I2C + select DRM_PANEL + select DRM_MIPI_DSI + ---help--- + Toshiba TC358775 LVDS bridge chip driver. + config DRM_TI_TFP410 tristate "TI TFP410 DVI/HDMI bridge" depends on OF diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index 1eb5376..9b2c512 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_DRM_SII9234) += sii9234.o obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o obj-$(CONFIG_DRM_TOSHIBA_TC358764) += tc358764.o obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o +obj-$(CONFIG_DRM_TOSHIBA_TC358775) += tc358775.o obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/ obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o diff --git a/drivers/gpu/drm/bridge/tc358775.c b/drivers/gpu/drm/bridge/tc358775.c new file mode 100644 index 0000000..3db0f49 --- /dev/null +++ b/drivers/gpu/drm/bridge/tc358775.c @@ -0,0 +1,687 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * tc358775 DSI to LVDS bridge driver + * + * Copyright (C) 2020 InforceComputing + * Author: Vinay Simha BN vinaysimha@inforcecomputing.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* #define DEBUG */ +/* #define TC358775_DEBUG */ +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/regulator/consumer.h> + +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_dp_helper.h> +#include <drm/drm_of.h> +#include <drm/drm_panel.h> +#include <drm/drm_bridge.h> +#include <drm/drm_probe_helper.h> + +/* Registers */ + +/* DSI D-PHY Layer Registers */ +#define D0W_DPHYCONTTX 0x0004 /* Data Lane 0 DPHY Tx Control */ +#define CLW_DPHYCONTRX 0x0020 /* Clock Lane DPHY Rx Control */ +#define D0W_DPHYCONTRX 0x0024 /* Data Lane 0 DPHY Rx Control */ +#define D1W_DPHYCONTRX 0x0028 /* Data Lane 1 DPHY Rx Control */ +#define D2W_DPHYCONTRX 0x002C /* Data Lane 2 DPHY Rx Control */ +#define D3W_DPHYCONTRX 0x0030 /* Data Lane 3 DPHY Rx Control */ +#define COM_DPHYCONTRX 0x0038 /* DPHY Rx Common Control */ +#define CLW_CNTRL 0x0040 /* Clock Lane Control */ +#define D0W_CNTRL 0x0044 /* Data Lane 0 Control */ +#define D1W_CNTRL 0x0048 /* Data Lane 1 Control */ +#define D2W_CNTRL 0x004C /* Data Lane 2 Control */ +#define D3W_CNTRL 0x0050 /* Data Lane 3 Control */ +#define DFTMODE_CNTRL 0x0054 /* DFT Mode Control */ + +/* DSI PPI Layer Registers */ +#define PPI_STARTPPI 0x0104 /* START control bit of PPI-TX function. */ +#define PPI_BUSYPPI 0x0108 +#define PPI_LINEINITCNT 0x0110 /* Line Initialization Wait Counter */ +#define PPI_LPTXTIMECNT 0x0114 +#define PPI_LANEENABLE 0x0134 /* Enables each lane at the PPI layer. */ +#define PPI_TX_RX_TA 0x013C /* DSI Bus Turn Around timing parameters */ + +/* Analog timer function enable */ +#define PPI_CLS_ATMR 0x0140 /* Delay for Clock Lane in LPRX */ +#define PPI_D0S_ATMR 0x0144 /* Delay for Data Lane 0 in LPRX */ +#define PPI_D1S_ATMR 0x0148 /* Delay for Data Lane 1 in LPRX */ +#define PPI_D2S_ATMR 0x014C /* Delay for Data Lane 2 in LPRX */ +#define PPI_D3S_ATMR 0x0150 /* Delay for Data Lane 3 in LPRX */ +#define PPI_D0S_CLRSIPOCOUNT 0x0164 + +#define PPI_D1S_CLRSIPOCOUNT 0x0168 /* For lane 1 */ +#define PPI_D2S_CLRSIPOCOUNT 0x016C /* For lane 2 */ +#define PPI_D3S_CLRSIPOCOUNT 0x0170 /* For lane 3 */ + +#define CLS_PRE 0x0180 /* Digital Counter inside of PHY IO */ +#define D0S_PRE 0x0184 /* Digital Counter inside of PHY IO */ +#define D1S_PRE 0x0188 /* Digital Counter inside of PHY IO */ +#define D2S_PRE 0x018C /* Digital Counter inside of PHY IO */ +#define D3S_PRE 0x0190 /* Digital Counter inside of PHY IO */ +#define CLS_PREP 0x01A0 /* Digital Counter inside of PHY IO */ +#define D0S_PREP 0x01A4 /* Digital Counter inside of PHY IO */ +#define D1S_PREP 0x01A8 /* Digital Counter inside of PHY IO */ +#define D2S_PREP 0x01AC /* Digital Counter inside of PHY IO */ +#define D3S_PREP 0x01B0 /* Digital Counter inside of PHY IO */ +#define CLS_ZERO 0x01C0 /* Digital Counter inside of PHY IO */ +#define D0S_ZERO 0x01C4 /* Digital Counter inside of PHY IO */ +#define D1S_ZERO 0x01C8 /* Digital Counter inside of PHY IO */ +#define D2S_ZERO 0x01CC /* Digital Counter inside of PHY IO */ +#define D3S_ZERO 0x01D0 /* Digital Counter inside of PHY IO */ + +#define PPI_CLRFLG 0x01E0 /* PRE Counters has reached set values */ +#define PPI_CLRSIPO 0x01E4 /* Clear SIPO values, Slave mode use only. */ +#define HSTIMEOUT 0x01F0 /* HS Rx Time Out Counter */ +#define HSTIMEOUTENABLE 0x01F4 /* Enable HS Rx Time Out Counter */ +#define DSI_STARTDSI 0x0204 /* START control bit of DSI-TX function */ +#define DSI_BUSYDSI 0x0208 +#define DSI_LANEENABLE 0x0210 /* Enables each lane at the Protocol layer. */ +#define DSI_LANESTATUS0 0x0214 /* Displays lane is in HS RX mode. */ +#define DSI_LANESTATUS1 0x0218 /* Displays lane is in ULPS or STOP state */ + +#define DSI_INTSTATUS 0x0220 /* Interrupt Status */ +#define DSI_INTMASK 0x0224 /* Interrupt Mask */ +#define DSI_INTCLR 0x0228 /* Interrupt Clear */ +#define DSI_LPTXTO 0x0230 /* Low Power Tx Time Out Counter */ + +#define DSIERRCNT 0x0300 /* DSI Error Count */ +#define APLCTRL 0x0400 /* Application Layer Control */ +#define RDPKTLN 0x0404 /* Command Read Packet Length */ + +#define VPCTRL 0x0450 /* Video Path Control */ +#define HTIM1 0x0454 /* Horizontal Timing Control 1 */ +#define HTIM2 0x0458 /* Horizontal Timing Control 2 */ +#define VTIM1 0x045C /* Vertical Timing Control 1 */ +#define VTIM2 0x0460 /* Vertical Timing Control 2 */ +#define VFUEN 0x0464 /* Video Frame Timing Update Enable */ + +/* Mux Input Select for LVDS LINK Input */ +#define LVMX0003 0x0480 /* Bit 0 to 3 */ +#define LVMX0407 0x0484 /* Bit 4 to 7 */ +#define LVMX0811 0x0488 /* Bit 8 to 11 */ +#define LVMX1215 0x048C /* Bit 12 to 15 */ +#define LVMX1619 0x0490 /* Bit 16 to 19 */ +#define LVMX2023 0x0494 /* Bit 20 to 23 */ +#define LVMX2427 0x0498 /* Bit 24 to 27 */ + +#define LVCFG 0x049C /* LVDS Configuration */ +#define LVPHY0 0x04A0 /* LVDS PHY 0 */ +#define LVPHY1 0x04A4 /* LVDS PHY 1 */ +#define SYSSTAT 0x0500 /* System Status */ +#define SYSRST 0x0504 /* System Reset */ +/* GPIO Registers */ +#define GPIOC 0x0520 /* GPIO Control */ +#define GPIOO 0x0524 /* GPIO Output */ +#define GPIOI 0x0528 /* GPIO Input */ + +/* I2C Registers */ +#define I2CTIMCTRL 0x0540 /* I2C IF Timing and Enable Control */ +#define I2CMADDR 0x0544 /* I2C Master Addressing */ +#define WDATAQ 0x0548 /* Write Data Queue */ +#define RDATAQ 0x054C /* Read Data Queue */ + +/* Chip ID and Revision ID Register */ +#define IDREG 0x0580 + +#define TC358775XBG_ID 0x00007500 + +/* Debug Registers */ +#define DEBUG00 0x05A0 /* Debug */ +#define DEBUG01 0x05A4 /* LVDS Data */ + +#define DSI_CLEN_BIT BIT(0) +#define DIVIDE_BY_3 3 /* PCLK=DCLK/3 */ +#define LVCFG_LVEN_BIT BIT(0) + +#define L0EN BIT(1) + +#define TC358775_VPCTRL_VSDELAY__MASK 0x3FF00000 +#define TC358775_VPCTRL_VSDELAY__SHIFT 20 +static inline uint32_t TC358775_VPCTRL_VSDELAY(uint32_t val) +{ + return ((val) << TC358775_VPCTRL_VSDELAY__SHIFT) & + TC358775_VPCTRL_VSDELAY__MASK; +} + +#define TC358775_VPCTRL_OPXLFMT__MASK 0x00000100 +#define TC358775_VPCTRL_OPXLFMT__SHIFT 8 +static inline uint32_t TC358775_VPCTRL_OPXLFMT(uint32_t val) +{ + return ((val) << TC358775_VPCTRL_OPXLFMT__SHIFT) & + TC358775_VPCTRL_OPXLFMT__MASK; +} + +#define TC358775_VPCTRL_MSF__MASK 0x00000001 +#define TC358775_VPCTRL_MSF__SHIFT 0 +static inline uint32_t TC358775_VPCTRL_MSF(uint32_t val) +{ + return ((val) << TC358775_VPCTRL_MSF__SHIFT) & + TC358775_VPCTRL_MSF__MASK; +} + +#define TC358775_LVCFG_PCLKDIV__MASK 0x000000f0 +#define TC358775_LVCFG_PCLKDIV__SHIFT 4 +static inline uint32_t TC358775_LVCFG_PCLKDIV(uint32_t val) +{ + return ((val) << TC358775_LVCFG_PCLKDIV__SHIFT) & + TC358775_LVCFG_PCLKDIV__MASK; +} + +#define TC358775_LVCFG_LVDLINK__MASK 0x00000002 +#define TC358775_LVCFG_LVDLINK__SHIFT 0 +static inline uint32_t TC358775_LVCFG_LVDLINK(uint32_t val) +{ + return ((val) << TC358775_LVCFG_LVDLINK__SHIFT) & + TC358775_LVCFG_LVDLINK__MASK; +} + +static const struct reg_sequence tc_fixed_registers[] = { + { 0x013C, 0x00040006 }, + { 0x0114, 0x00000004 }, + { 0x0164, 0x00000003 }, + { 0x0168, 0x00000003 }, + { 0x016C, 0x00000003 }, + { 0x0170, 0x00000003 }, +}; + +static const struct reg_sequence tc_vesa_data_format_registers[] = { + { 0x0480, 0x03020100 }, + { 0x0484, 0x08050704 }, + { 0x0488, 0x0F0E0A09 }, + { 0x048C, 0x100D0C0B }, + { 0x0490, 0x12111716 }, + { 0x0494, 0x1B151413 }, + { 0x0498, 0x061A1918 }, +}; + +static const char * const regulator_names[] = { + "vdd", + "vddio" +}; + +struct tc_data { + struct i2c_client *i2c; + + struct device *dev; + struct regmap *regmap; + + struct drm_bridge bridge; + struct drm_connector connector; + struct drm_panel *panel; + + enum drm_connector_status status; + struct device_node *host_node; + struct mipi_dsi_device *dsi; + u8 num_dsi_lanes; + + struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)]; + struct gpio_desc *reset_gpio; + struct gpio_desc *stby_gpio; + u32 rev; + u8 dual_link; /* single-link or dual-link */ + u8 data_format; /* VESA or JEIDA */ +}; + +static inline struct tc_data *bridge_to_tc(struct drm_bridge *b) +{ + return container_of(b, struct tc_data, bridge); +} + +static inline struct tc_data *connector_to_tc(struct drm_connector *c) +{ + return container_of(c, struct tc_data, connector); +} + +static void tc_bridge_pre_enable(struct drm_bridge *bridge) +{ + struct tc_data *tc = bridge_to_tc(bridge); + struct device *dev = &tc->dsi->dev; + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(tc->supplies), tc->supplies); + if (ret < 0) { + dev_err(dev, "regulator enable failed, %d\n", ret); + return; + } + mdelay(10); + + gpiod_set_value(tc->stby_gpio, 0); + mdelay(10); + + gpiod_set_value(tc->reset_gpio, 0); + ndelay(50); + + drm_panel_prepare(tc->panel); +} + +static void tc_bridge_disable(struct drm_bridge *bridge) +{ + struct tc_data *tc = bridge_to_tc(bridge); + struct device *dev = &tc->dsi->dev; + int ret; + + ret = regulator_bulk_disable(ARRAY_SIZE(tc->supplies), tc->supplies); + if (ret < 0) + dev_err(dev, "regulator disable failed, %d\n", ret); + mdelay(10); + + gpiod_set_value(tc->stby_gpio, 1); + mdelay(10); + + gpiod_set_value(tc->reset_gpio, 1); + ndelay(50); + + drm_panel_disable(tc->panel); +} + +static void tc_bridge_post_disable(struct drm_bridge *bridge) +{ + struct tc_data *tc = bridge_to_tc(bridge); + + drm_panel_unprepare(tc->panel); +} + +#ifdef TC358775_DEBUG +static u32 d2l_read(struct tc_data *tc, u16 reg) +{ + int ret; + u32 data; + + ret = regmap_bulk_read(tc->regmap, reg, &data, 1); + if (ret) + return ret; + + pr_debug("d2l: I2C : reg:%04x value:%08x\n", reg, data); + + return data; +} +#endif + +static int d2l_write(struct tc_data *tc, u16 reg, u32 data) +{ + int ret = 0; + + ret = regmap_bulk_write(tc->regmap, reg, (u32[]) {data}, 1); + +#ifdef TC358775_DEBUG + d2l_read(tc, reg); +#endif + return ret; +} + +static void tc_bridge_enable(struct drm_bridge *bridge) +{ + struct tc_data *tc = bridge_to_tc(bridge); + int ret; + u32 hbpr, hpw, htime1, hfpr, hsize, htime2; + u32 vbpr, vpw, vtime1, vfpr, vsize, vtime2; + u32 val = 0; + struct drm_display_mode *mode; + + mode = &bridge->encoder->crtc->state->adjusted_mode; + + hbpr = 0; + hpw = mode->hsync_end - mode->hsync_start; + vbpr = 0; + vpw = mode->vsync_end - mode->vsync_start; + + htime1 = (hbpr << 16) + hpw; + vtime1 = (vbpr << 16) + vpw; + + hfpr = mode->hsync_start - mode->hdisplay; + hsize = mode->hdisplay; + vfpr = mode->vsync_start - mode->vdisplay; + vsize = mode->vdisplay; + + htime2 = (hfpr << 16) + hsize; + vtime2 = (vfpr << 16) + vsize; + + ret = regmap_read(tc->regmap, IDREG, &tc->rev); + if (ret) { + dev_err(tc->dev, "can not read device ID: %d\n", ret); + return; + } + pr_debug("tc IDREG %04x Rev. %08x\n", IDREG, tc->rev); + + d2l_write(tc, SYSRST, 0x000000FF); + mdelay(30); + + ret = regmap_register_patch(tc->regmap, + tc_fixed_registers, + ARRAY_SIZE(tc_fixed_registers)); + if (ret) + return; + + val = ((L0EN << tc->num_dsi_lanes) - L0EN) | DSI_CLEN_BIT; + d2l_write(tc, PPI_LANEENABLE, val); + d2l_write(tc, DSI_LANEENABLE, val); + + d2l_write(tc, PPI_STARTPPI, 0x00000001); + d2l_write(tc, DSI_STARTDSI, 0x00000001); + + val = TC358775_VPCTRL_VSDELAY(21); //TODO : to set the dynamic value + + if (tc->connector.display_info.bpc == 8) {/* RGB888 */ + val |= TC358775_VPCTRL_OPXLFMT(1); + d2l_write(tc, VPCTRL, val); + } else { /* RGB666 */ + val |= TC358775_VPCTRL_MSF(1); + d2l_write(tc, VPCTRL, val); + } + + d2l_write(tc, HTIM1, htime1); + d2l_write(tc, VTIM1, vtime1); + d2l_write(tc, HTIM2, htime2); + d2l_write(tc, VTIM2, vtime2); + + d2l_write(tc, VFUEN, 0x00000001); + d2l_write(tc, SYSRST, 0x00000004); + d2l_write(tc, LVPHY0, 0x00040006); + + if (tc->data_format) { /* Data Format VESA=0 , JEIDA=1 */ + ret = regmap_register_patch + (tc->regmap, + tc_vesa_data_format_registers, + ARRAY_SIZE(tc_vesa_data_format_registers)); + if (ret) + return; + } + + d2l_write(tc, VFUEN, 0x00000001); + + val = TC358775_LVCFG_PCLKDIV(DIVIDE_BY_3) | LVCFG_LVEN_BIT; + if (tc->dual_link) + val |= TC358775_LVCFG_LVDLINK(1); + + d2l_write(tc, LVCFG, val); + + drm_panel_enable(tc->panel); +} + +static int tc_connector_get_modes(struct drm_connector *connector) +{ + struct tc_data *tc = connector_to_tc(connector); + struct edid *edid; + unsigned int count; + + if (tc->panel && tc->panel->funcs && tc->panel->funcs->get_modes) { + count = tc->panel->funcs->get_modes(tc->panel, connector); + if (count > 0) + return count; + } + + edid = drm_get_edid(connector, tc->i2c->adapter); + if (!edid) + return 0; + + drm_connector_update_edid_property(connector, edid); + count = drm_add_edid_modes(connector, edid); + kfree(edid); + + return count; +} + +static int tc_connector_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct tc_data *tc = connector_to_tc(connector); + + /* Maximum pixel clock speed 135MHz-single-link/270MHz-dual-link */ + if ((mode->clock > 135000 && tc->dual_link == 0) || + (mode->clock > 270000 && tc->dual_link == 1)) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + +static struct drm_encoder * +tc_connector_best_encoder(struct drm_connector *connector) +{ + struct tc_data *tc = connector_to_tc(connector); + + return tc->bridge.encoder; +} + +static const struct drm_connector_helper_funcs tc_connector_helper_funcs = { + .get_modes = tc_connector_get_modes, + .mode_valid = tc_connector_mode_valid, + .best_encoder = tc_connector_best_encoder, +}; + +static const struct drm_connector_funcs tc_connector_funcs = { + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +int tc358775_parse_dt(struct device_node *np, struct tc_data *tc) +{ + u32 num_lanes; + u8 dual_link, data_format; + + of_property_read_u8(np, "tc,dual-link", &dual_link); + of_property_read_u8(np, "tc,data-format", &data_format); + of_property_read_u32(np, "tc,dsi-lanes", &num_lanes); + + if (num_lanes < 1 || num_lanes > 4) + return -EINVAL; + + tc->num_dsi_lanes = num_lanes; + tc->dual_link = dual_link; + tc->data_format = data_format; + + tc->host_node = of_graph_get_remote_node(np, 0, 0); + if (!tc->host_node) + return -ENODEV; + + of_node_put(tc->host_node); + + return 0; +} + +int tc358775_attach_dsi(struct tc_data *tc) +{ + struct device *dev = &tc->i2c->dev; + struct mipi_dsi_host *host; + struct mipi_dsi_device *dsi; + int ret = 0; + const struct mipi_dsi_device_info info = { .type = "tc358775", + .channel = 0, + .node = NULL, + }; + + host = of_find_mipi_dsi_host_by_node(tc->host_node); + if (!host) { + dev_err(dev, "failed to find dsi host\n"); + return -EPROBE_DEFER; + } + + dsi = mipi_dsi_device_register_full(host, &info); + if (IS_ERR(dsi)) { + dev_err(dev, "failed to create dsi device\n"); + ret = PTR_ERR(dsi); + goto err_dsi_device; + } + + tc->dsi = dsi; + + dsi->lanes = tc->num_dsi_lanes; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO; + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + dev_err(dev, "failed to attach dsi to host\n"); + goto err_dsi_attach; + } + + return 0; + +err_dsi_attach: + mipi_dsi_device_unregister(dsi); +err_dsi_device: + return ret; +} + +static int tc_bridge_attach(struct drm_bridge *bridge) +{ + struct tc_data *tc = bridge_to_tc(bridge); + struct drm_device *drm = bridge->dev; + int ret; + + /* Create LVDS connector */ + drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs); + ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs, + DRM_MODE_CONNECTOR_LVDS); + if (ret) + return ret; + + if (tc->panel) + drm_panel_attach(tc->panel, &tc->connector); + + drm_connector_attach_encoder(&tc->connector, tc->bridge.encoder); + + ret = tc358775_attach_dsi(tc); + + return 0; +} + +static const struct drm_bridge_funcs tc_bridge_funcs = { + .attach = tc_bridge_attach, + .pre_enable = tc_bridge_pre_enable, + .enable = tc_bridge_enable, + .disable = tc_bridge_disable, + .post_disable = tc_bridge_post_disable, +}; + +static const struct regmap_config tc_regmap_config = { + .name = "tc358775", + .reg_bits = 16, + .val_bits = 32, + .reg_stride = 4, + .max_register = 0x05A8, + .cache_type = REGCACHE_RBTREE, + .reg_format_endian = REGMAP_ENDIAN_BIG, + .val_format_endian = REGMAP_ENDIAN_LITTLE, +}; + +static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct tc_data *tc; + int ret; + unsigned int i; + + tc = devm_kzalloc(dev, sizeof(*tc), GFP_KERNEL); + if (!tc) + return -ENOMEM; + + tc->dev = dev; + tc->i2c = client; + tc->status = connector_status_connected; + + /* port@1 is the output port */ + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &tc->panel, NULL); + if (ret && ret != -ENODEV) + return ret; + + ret = tc358775_parse_dt(dev->of_node, tc); + if (ret) + return ret; + + for (i = 0; i < ARRAY_SIZE(tc->supplies); i++) + tc->supplies[i].supply = regulator_names[i]; + + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(tc->supplies), + tc->supplies); + if (ret < 0) + dev_err(dev, "failed to init regulator, ret=%d\n", ret); + + tc->stby_gpio = devm_gpiod_get(dev, "stby", GPIOD_OUT_HIGH); + if (IS_ERR(tc->stby_gpio)) { + ret = PTR_ERR(tc->stby_gpio); + dev_err(dev, "cannot get stby-gpio %d\n", ret); + return ret; + } + + tc->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(tc->reset_gpio)) { + ret = PTR_ERR(tc->reset_gpio); + dev_err(dev, "cannot get reset-gpios %d\n", ret); + return ret; + } + + tc->regmap = devm_regmap_init_i2c(client, &tc_regmap_config); + if (IS_ERR(tc->regmap)) { + ret = PTR_ERR(tc->regmap); + dev_err(dev, "Failed to initialize regmap: %d\n", ret); + return ret; + } + + tc->bridge.funcs = &tc_bridge_funcs; + tc->bridge.of_node = dev->of_node; + drm_bridge_add(&tc->bridge); + + i2c_set_clientdata(client, tc); + + return 0; +} + +static int tc_remove(struct i2c_client *client) +{ + struct tc_data *tc = i2c_get_clientdata(client); + + drm_bridge_remove(&tc->bridge); + + return 0; +} + +static const struct i2c_device_id tc358775_i2c_ids[] = { + { "tc358775", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tc358775_i2c_ids); + +static const struct of_device_id tc358775_of_ids[] = { + { .compatible = "toshiba,tc358775", }, + { } +}; +MODULE_DEVICE_TABLE(of, tc358775_of_ids); + +static struct i2c_driver tc358775_driver = { + .driver = { + .name = "tc358775", + .of_match_table = tc358775_of_ids, + }, + .id_table = tc358775_i2c_ids, + .probe = tc_probe, + .remove = tc_remove, +}; +module_i2c_driver(tc358775_driver); + +MODULE_AUTHOR("Vinay Simha BN vinaysimha@inforcecomputing.com"); +MODULE_DESCRIPTION("tc358775 LVDS encoder driver"); +MODULE_LICENSE("GPL v2");