In the not-enabled -> enabled path pwm_lpss_apply() needs to get a runtime-pm reference; and then on any errors it needs to release it again.
This leads to somewhat hard to read code. This commit introduces a new pwm_lpss_prepare_enable() helper and moves all the steps necessary for the not-enabled -> enabled transition there, so that we can error check the entire transition in a single place and only have one pm_runtime_put() on failure call site.
While working on this I noticed that the enabled -> enabled (update settings) path was quite similar, so I've added an enable parameter to the new pwm_lpss_prepare_enable() helper, which allows using it in that path too.
Suggested-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Hans de Goede hdegoede@redhat.com --- drivers/pwm/pwm-lpss.c | 45 ++++++++++++++++++++++++------------------ 1 file changed, 26 insertions(+), 19 deletions(-)
diff --git a/drivers/pwm/pwm-lpss.c b/drivers/pwm/pwm-lpss.c index da9bc3d10104..8a136ba2a583 100644 --- a/drivers/pwm/pwm-lpss.c +++ b/drivers/pwm/pwm-lpss.c @@ -122,41 +122,48 @@ static inline void pwm_lpss_cond_enable(struct pwm_device *pwm, bool cond) pwm_lpss_write(pwm, pwm_lpss_read(pwm) | PWM_ENABLE); }
+static int pwm_lpss_prepare_enable(struct pwm_lpss_chip *lpwm, + struct pwm_device *pwm, + const struct pwm_state *state, + bool enable) +{ + int ret; + + ret = pwm_lpss_is_updating(pwm); + if (ret) + return ret; + + pwm_lpss_prepare(lpwm, pwm, state->duty_cycle, state->period); + pwm_lpss_cond_enable(pwm, enable && lpwm->info->bypass == false); + ret = pwm_lpss_wait_for_update(pwm); + if (ret) + return ret; + + pwm_lpss_cond_enable(pwm, enable && lpwm->info->bypass == true); + return 0; +} + static int pwm_lpss_apply(struct pwm_chip *chip, struct pwm_device *pwm, const struct pwm_state *state) { struct pwm_lpss_chip *lpwm = to_lpwm(chip); - int ret; + int ret = 0;
if (state->enabled) { if (!pwm_is_enabled(pwm)) { pm_runtime_get_sync(chip->dev); - ret = pwm_lpss_is_updating(pwm); - if (ret) { - pm_runtime_put(chip->dev); - return ret; - } - pwm_lpss_prepare(lpwm, pwm, state->duty_cycle, state->period); - pwm_lpss_cond_enable(pwm, lpwm->info->bypass == false); - ret = pwm_lpss_wait_for_update(pwm); - if (ret) { + ret = pwm_lpss_prepare_enable(lpwm, pwm, state, true); + if (ret) pm_runtime_put(chip->dev); - return ret; - } - pwm_lpss_cond_enable(pwm, lpwm->info->bypass == true); } else { - ret = pwm_lpss_is_updating(pwm); - if (ret) - return ret; - pwm_lpss_prepare(lpwm, pwm, state->duty_cycle, state->period); - return pwm_lpss_wait_for_update(pwm); + ret = pwm_lpss_prepare_enable(lpwm, pwm, state, false); } } else if (pwm_is_enabled(pwm)) { pwm_lpss_write(pwm, pwm_lpss_read(pwm) & ~PWM_ENABLE); pm_runtime_put(chip->dev); }
- return 0; + return ret; }
static void pwm_lpss_get_state(struct pwm_chip *chip, struct pwm_device *pwm,