Instead of going through the sequence just once, run through the whole set up to 5 times to see if something can work. This isn't part of the DP spec, but the BIOS seems to do it, and given that link training failure is so bad, it seems reasonable to follow suit.
Signed-off-by: Keith Packard keithp@keithp.com --- drivers/gpu/drm/i915/intel_dp.c | 41 +++++++++++++++++++++++++------------- 1 files changed, 27 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 6be6a04..bf20a35 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1576,8 +1576,9 @@ intel_dp_set_link_train(struct intel_dp *intel_dp,
ret = intel_dp_aux_native_write(intel_dp, DP_TRAINING_LANE0_SET, - intel_dp->train_set, 4); - if (ret != 4) + intel_dp->train_set, + intel_dp->lane_count); + if (ret != intel_dp->lane_count) return false;
return true; @@ -1593,7 +1594,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) int i; uint8_t voltage; bool clock_recovery = false; - int tries; + int voltage_tries, loop_tries; u32 reg; uint32_t DP = intel_dp->DP;
@@ -1620,7 +1621,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) DP &= ~DP_LINK_TRAIN_MASK; memset(intel_dp->train_set, 0, 4); voltage = 0xff; - tries = 0; + voltage_tries = 0; + loop_tries = 0; clock_recovery = false; for (;;) { /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ @@ -1663,17 +1665,28 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) for (i = 0; i < intel_dp->lane_count; i++) if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) break; - if (i == intel_dp->lane_count) - break; - - /* Check to see if we've tried the same voltage 5 times */ - if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { - ++tries; - if (tries == 5) + if (i == intel_dp->lane_count) { + ++loop_tries; + if (loop_tries == 5) { + DRM_DEBUG_KMS("too many full retries, give up\n"); break; - } else - tries = 0; - voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; + } + memset(intel_dp->train_set, 0, 4); + voltage_tries = 0; + continue; + } else { + + /* Check to see if we've tried the same voltage 5 times */ + if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { + ++voltage_tries; + if (voltage_tries == 5) { + DRM_DEBUG_KMS("too many voltage retries, give up\n"); + break; + } + } else + voltage_tries = 0; + voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; + }
/* Compute new intel_dp->train_set as requested by target */ intel_get_adjust_train(intel_dp, link_status);