From: Lars-Peter Clausen lars@metafoo.de
This patch adds a driver for the Analog Devices adv7511. The adv7511 is a standalone HDMI transmitter chip. It features a HDMI output interface on one end and video and audio input interfaces on the other.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de Signed-off-by: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com
---
This commit incorporates the following commits.
DRM: adv7511: Sync to latest version DRM: adv7511: Fix calculation and setting of CTS DRM: adv7511: Write status word frequency and word len registers adv7511: Remove some debug printks Merge branch 'xcomm_zynq' into xcomm_zynq_3_5 Sync adv7511 and axi-hdmi driver to latest version drm:adv7511: Re-add module information DRM: adv7511: Don't use raw_edid to pass edid data drm: adv7511: Ignore the csc scaling factor when the csc is disabled drm: adv7511: Check if edid is NULL before duplicating it drm: adv7511: Include the extension sections when duplicating the edid DRM: adv7511: Work around off-by-one hardware bug DRM: adv7511: Make embedded sync generator setup more robust DRM: adv7511_audio: Fix typo DRM: adv7511: Add powerdown gpio support drm: adv7511: Fix use after free DRM: adv7511: Properly initialize dpms_mode and status DRM: adv7511: Avoid uneccessary disconnected events drm: adv7511: Fix adv7511 encoder driver drm: adv7511: Fix kernel-doc format drm: adv7511: Fix adv7511_parse_dt() drm: adv7511: Add the rgb format flag to adv7511_link_config drm: adv7511: Configure CSC in adv7511_set_config() drm: adv7511: Add adv7511_set_config_csc() drm: adv7511: Configure the csc when getting modes drm: adv7511: Add adv7511_encoder_mode_valid() function drm: adv7511: Don't export adv7511_get_edid function drm: adv7511: Mark the revision register as volatile drm: adv7511: Initialize work queue before requesting IRQ drm: adv7511: Remove trailing whitespaces drm: adv7511: Remove audio support drm: adv7511: Remove DRM slave encoder .set_config operation drm: adv7511: Make the adv7511_packet_(enable|disable) functions static drm: adv7511: Move Kconfig entry to drivers/gpu/drm/i2c/Kconfig drm: adv7511: Update to the latest DRM API drm: adv7511: Rename driver source file to adv7511.c drm: adv7511: Add OF match table drm: adv7511: Add ADV7513 support drm: adv7511: Remove platform data support drm: adv7511: Convert to the gpiod API drm: adv7511: Remove packet and CEC I2C device support drm: adv7511: Use the devm_ managed IRQ API drm: adv7511: Remove unneeded local variable initialization drm: adv7511: Pass the adv7511 pointer to adv7511_get_edid_block drm: adv7511: Make loop counter unsigned drm: adv7511: Pass adv7511 pointer to adv7511_set_config_csc function drm: adv7511: Reorganize the code in sections drm: adv7511: Simplify DT bindings drm: adv7511: Use map array to convert input style to hardware value --- drivers/gpu/drm/i2c/Kconfig | 6 + drivers/gpu/drm/i2c/Makefile | 2 + drivers/gpu/drm/i2c/adv7511.c | 1010 +++++++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i2c/adv7511.h | 289 ++++++++++++ 4 files changed, 1307 insertions(+) create mode 100644 drivers/gpu/drm/i2c/adv7511.c create mode 100644 drivers/gpu/drm/i2c/adv7511.h
diff --git a/drivers/gpu/drm/i2c/Kconfig b/drivers/gpu/drm/i2c/Kconfig index 4d341db462a2..22c7ed63a001 100644 --- a/drivers/gpu/drm/i2c/Kconfig +++ b/drivers/gpu/drm/i2c/Kconfig @@ -1,6 +1,12 @@ menu "I2C encoder or helper chips" depends on DRM && DRM_KMS_HELPER && I2C
+config DRM_I2C_ADV7511 + tristate "AV7511 encoder" + select REGMAP_I2C + help + Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders. + config DRM_I2C_CH7006 tristate "Chrontel ch7006 TV encoder" default m if DRM_NOUVEAU diff --git a/drivers/gpu/drm/i2c/Makefile b/drivers/gpu/drm/i2c/Makefile index 43aa33baebed..2c72eb584ab7 100644 --- a/drivers/gpu/drm/i2c/Makefile +++ b/drivers/gpu/drm/i2c/Makefile @@ -1,5 +1,7 @@ ccflags-y := -Iinclude/drm
+obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o + ch7006-y := ch7006_drv.o ch7006_mode.o obj-$(CONFIG_DRM_I2C_CH7006) += ch7006.o
diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/i2c/adv7511.c new file mode 100644 index 000000000000..faf1c0c5ab2e --- /dev/null +++ b/drivers/gpu/drm/i2c/adv7511.c @@ -0,0 +1,1010 @@ +/* + * Analog Devices ADV7511 HDMI transmitter driver + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#include <drm/drmP.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_encoder_slave.h> + +#include "adv7511.h" + +struct adv7511 { + struct i2c_client *i2c_main; + struct i2c_client *i2c_edid; + + struct regmap *regmap; + struct regmap *packet_memory_regmap; + enum drm_connector_status status; + int dpms_mode; + + unsigned int f_tmds; + + unsigned int current_edid_segment; + uint8_t edid_buf[256]; + + wait_queue_head_t wq; + struct drm_encoder *encoder; + + bool embedded_sync; + enum adv7511_sync_polarity vsync_polarity; + enum adv7511_sync_polarity hsync_polarity; + bool rgb; + + struct edid *edid; + + struct gpio_desc *gpio_pd; +}; + +static struct adv7511 *encoder_to_adv7511(struct drm_encoder *encoder) +{ + return to_encoder_slave(encoder)->slave_priv; +} + +/* ADI recommended values for proper operation. */ +static const struct reg_default adv7511_fixed_registers[] = { + { 0x98, 0x03 }, + { 0x9a, 0xe0 }, + { 0x9c, 0x30 }, + { 0x9d, 0x61 }, + { 0xa2, 0xa4 }, + { 0xa3, 0xa4 }, + { 0xe0, 0xd0 }, + { 0xf9, 0x00 }, + { 0x55, 0x02 }, +}; + +/* ----------------------------------------------------------------------------- + * Register access + */ + +static const uint8_t adv7511_register_defaults[] = { + 0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 00 */ + 0x00, 0x00, 0x01, 0x0e, 0xbc, 0x18, 0x01, 0x13, + 0x25, 0x37, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 10 */ + 0x46, 0x62, 0x04, 0xa8, 0x00, 0x00, 0x1c, 0x84, + 0x1c, 0xbf, 0x04, 0xa8, 0x1e, 0x70, 0x02, 0x1e, /* 20 */ + 0x00, 0x00, 0x04, 0xa8, 0x08, 0x12, 0x1b, 0xac, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 30 */ + 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0xb0, + 0x00, 0x50, 0x90, 0x7e, 0x79, 0x70, 0x00, 0x00, /* 40 */ + 0x00, 0xa8, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x02, 0x0d, 0x00, 0x00, 0x00, 0x00, /* 50 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 60 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 70 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 80 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, /* 90 */ + 0x0b, 0x02, 0x00, 0x18, 0x5a, 0x60, 0x00, 0x00, + 0x00, 0x00, 0x80, 0x80, 0x08, 0x04, 0x00, 0x00, /* a0 */ + 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x14, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b0 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c0 */ + 0x00, 0x03, 0x00, 0x00, 0x02, 0x00, 0x01, 0x04, + 0x30, 0xff, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, /* d0 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x01, + 0x80, 0x75, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, /* e0 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x75, 0x11, 0x00, /* f0 */ + 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; + +static bool adv7511_register_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ADV7511_REG_CHIP_REVISION: + case ADV7511_REG_SPDIF_FREQ: + case ADV7511_REG_CTS_AUTOMATIC1: + case ADV7511_REG_CTS_AUTOMATIC2: + case ADV7511_REG_VIC_DETECTED: + case ADV7511_REG_VIC_SEND: + case ADV7511_REG_AUX_VIC_DETECTED: + case ADV7511_REG_STATUS: + case ADV7511_REG_GC(1): + case ADV7511_REG_INT(0): + case ADV7511_REG_INT(1): + case ADV7511_REG_PLL_STATUS: + case ADV7511_REG_AN(0): + case ADV7511_REG_AN(1): + case ADV7511_REG_AN(2): + case ADV7511_REG_AN(3): + case ADV7511_REG_AN(4): + case ADV7511_REG_AN(5): + case ADV7511_REG_AN(6): + case ADV7511_REG_AN(7): + case ADV7511_REG_HDCP_STATUS: + case ADV7511_REG_BCAPS: + case ADV7511_REG_BKSV(0): + case ADV7511_REG_BKSV(1): + case ADV7511_REG_BKSV(2): + case ADV7511_REG_BKSV(3): + case ADV7511_REG_BKSV(4): + case ADV7511_REG_DDC_STATUS: + case ADV7511_REG_BSTATUS(0): + case ADV7511_REG_BSTATUS(1): + case ADV7511_REG_CHIP_ID_HIGH: + case ADV7511_REG_CHIP_ID_LOW: + return true; + } + + return false; +} + +static const struct regmap_config adv7511_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = 0xff, + .cache_type = REGCACHE_RBTREE, + .reg_defaults_raw = adv7511_register_defaults, + .num_reg_defaults_raw = ARRAY_SIZE(adv7511_register_defaults), + + .volatile_reg = adv7511_register_volatile, +}; + +/* ----------------------------------------------------------------------------- + * Hardware configuration + */ + +static void adv7511_set_colormap(struct adv7511 *adv7511, bool enable, + const uint16_t *coeff, + unsigned int scaling_factor) +{ + unsigned int i; + + regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1), + ADV7511_CSC_UPDATE_MODE, ADV7511_CSC_UPDATE_MODE); + + if (enable) { + for (i = 0; i < 12; ++i) { + regmap_update_bits(adv7511->regmap, + ADV7511_REG_CSC_UPPER(i), + 0x1f, coeff[i] >> 8); + regmap_write(adv7511->regmap, + ADV7511_REG_CSC_LOWER(i), + coeff[i] & 0xff); + } + } + + if (enable) + regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0), + 0xe0, 0x80 | (scaling_factor << 5)); + else + regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0), + 0x80, 0x00); + + regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1), + ADV7511_CSC_UPDATE_MODE, 0); +} + +static int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet) +{ + if (packet & 0xff) + regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0, + packet, 0xff); + + if (packet & 0xff00) { + packet >>= 8; + regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1, + packet, 0xff); + } + + return 0; +} + +static int adv7511_packet_disable(struct adv7511 *adv7511, unsigned int packet) +{ + if (packet & 0xff) + regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0, + packet, 0x00); + + if (packet & 0xff00) { + packet >>= 8; + regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1, + packet, 0x00); + } + + return 0; +} + +/* Coefficients for adv7511 color space conversion */ +static const uint16_t adv7511_csc_ycbcr_to_rgb[] = { + 0x0734, 0x04ad, 0x0000, 0x1c1b, + 0x1ddc, 0x04ad, 0x1f24, 0x0135, + 0x0000, 0x04ad, 0x087c, 0x1b77, +}; + +static void adv7511_set_config_csc(struct adv7511 *adv7511, + struct drm_connector *connector, + bool rgb) +{ + struct adv7511_video_config config; + bool output_format_422, output_format_ycbcr; + unsigned int mode; + uint8_t infoframe[17]; + + if (adv7511->edid) + config.hdmi_mode = drm_detect_hdmi_monitor(adv7511->edid); + else + config.hdmi_mode = false; + + hdmi_avi_infoframe_init(&config.avi_infoframe); + + config.avi_infoframe.scan_mode = HDMI_SCAN_MODE_UNDERSCAN; + + if (rgb) { + config.csc_enable = false; + config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB; + } else { + config.csc_scaling_factor = ADV7511_CSC_SCALING_4; + config.csc_coefficents = adv7511_csc_ycbcr_to_rgb; + + if ((connector->display_info.color_formats & + DRM_COLOR_FORMAT_YCRCB422) && + config.hdmi_mode) { + config.csc_enable = false; + config.avi_infoframe.colorspace = + HDMI_COLORSPACE_YUV422; + } else { + config.csc_enable = true; + config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB; + } + } + + if (config.hdmi_mode) { + mode = ADV7511_HDMI_CFG_MODE_HDMI; + + switch (config.avi_infoframe.colorspace) { + case HDMI_COLORSPACE_YUV444: + output_format_422 = false; + output_format_ycbcr = true; + break; + case HDMI_COLORSPACE_YUV422: + output_format_422 = true; + output_format_ycbcr = true; + break; + default: + output_format_422 = false; + output_format_ycbcr = false; + break; + } + } else { + mode = ADV7511_HDMI_CFG_MODE_DVI; + output_format_422 = false; + output_format_ycbcr = false; + } + + adv7511_packet_disable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME); + + adv7511_set_colormap(adv7511, config.csc_enable, + config.csc_coefficents, + config.csc_scaling_factor); + + regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x81, + (output_format_422 << 7) | output_format_ycbcr); + + regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG, + ADV7511_HDMI_CFG_MODE_MASK, mode); + + hdmi_avi_infoframe_pack(&config.avi_infoframe, infoframe, + sizeof(infoframe)); + + /* The AVI infoframe id is not configurable */ + regmap_bulk_write(adv7511->regmap, ADV7511_REG_AVI_INFOFRAME_VERSION, + infoframe + 1, sizeof(infoframe) - 1); + + adv7511_packet_enable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME); +} + +static void adv7511_set_link_config(struct adv7511 *adv7511, + const struct adv7511_link_config *config) +{ + /* + * The input style values documented in the datasheet don't match the + * hardware register field values :-( + */ + static const unsigned int input_styles[4] = { 0, 2, 1, 3 }; + + unsigned int clock_delay; + unsigned int color_depth; + unsigned int input_id; + + clock_delay = (config->clock_delay + 1200) / 400; + color_depth = config->input_color_depth == 8 ? 3 + : (config->input_color_depth == 10 ? 1 : 2); + + /* TODO Support input ID 6 */ + if (config->input_colorspace != HDMI_COLORSPACE_YUV422) + input_id = config->input_clock == ADV7511_INPUT_CLOCK_DDR + ? 5 : 0; + else if (config->input_clock == ADV7511_INPUT_CLOCK_DDR) + input_id = config->embedded_sync ? 8 : 7; + else if (config->input_clock == ADV7511_INPUT_CLOCK_2X) + input_id = config->embedded_sync ? 4 : 3; + else + input_id = config->embedded_sync ? 2 : 1; + + regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG, 0xf, + input_id); + regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x7e, + (color_depth << 4) | + (input_styles[config->input_style] << 2)); + regmap_write(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG2, + config->input_justification << 3); + regmap_write(adv7511->regmap, ADV7511_REG_TIMING_GEN_SEQ, + config->sync_pulse << 2); + + regmap_write(adv7511->regmap, 0xba, clock_delay << 5); + + adv7511->embedded_sync = config->embedded_sync; + adv7511->hsync_polarity = config->hsync_polarity; + adv7511->vsync_polarity = config->vsync_polarity; + adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB; +} + +/* ----------------------------------------------------------------------------- + * Interrupt and hotplug detection + */ + +static bool adv7511_hpd(struct adv7511 *adv7511) +{ + unsigned int irq0; + int ret; + + ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0); + if (ret < 0) + return false; + + if (irq0 & ADV7511_INT0_HDP) { + regmap_write(adv7511->regmap, ADV7511_REG_INT(0), + ADV7511_INT0_HDP); + return true; + } + + return false; +} + +static irqreturn_t adv7511_irq_handler(int irq, void *devid) +{ + struct adv7511 *adv7511 = devid; + + if (adv7511_hpd(adv7511)) + drm_helper_hpd_irq_event(adv7511->encoder->dev); + + wake_up_all(&adv7511->wq); + + return IRQ_HANDLED; +} + +static unsigned int adv7511_is_interrupt_pending(struct adv7511 *adv7511, + unsigned int irq) +{ + unsigned int irq0, irq1; + unsigned int pending; + int ret; + + ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0); + if (ret < 0) + return 0; + ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(1), &irq1); + if (ret < 0) + return 0; + + pending = (irq1 << 8) | irq0; + + return pending & irq; +} + +static int adv7511_wait_for_interrupt(struct adv7511 *adv7511, int irq, + int timeout) +{ + unsigned int pending; + int ret; + + if (adv7511->i2c_main->irq) { + ret = wait_event_interruptible_timeout(adv7511->wq, + adv7511_is_interrupt_pending(adv7511, irq), + msecs_to_jiffies(timeout)); + if (ret <= 0) + return 0; + pending = adv7511_is_interrupt_pending(adv7511, irq); + } else { + if (timeout < 25) + timeout = 25; + do { + pending = adv7511_is_interrupt_pending(adv7511, irq); + if (pending) + break; + msleep(25); + timeout -= 25; + } while (timeout >= 25); + } + + return pending; +} + +/* ----------------------------------------------------------------------------- + * EDID retrieval + */ + +static int adv7511_get_edid_block(void *data, u8 *buf, unsigned int block, + size_t len) +{ + struct adv7511 *adv7511 = data; + struct i2c_msg xfer[2]; + uint8_t offset; + unsigned int i; + int ret; + + if (len > 128) + return -EINVAL; + + if (adv7511->current_edid_segment != block / 2) { + unsigned int status; + + ret = regmap_read(adv7511->regmap, ADV7511_REG_DDC_STATUS, + &status); + if (ret < 0) + return ret; + + if (status != 2) { + regmap_write(adv7511->regmap, ADV7511_REG_EDID_SEGMENT, + block); + ret = adv7511_wait_for_interrupt(adv7511, + ADV7511_INT0_EDID_READY | + ADV7511_INT1_DDC_ERROR, 200); + + if (!(ret & ADV7511_INT0_EDID_READY)) + return -EIO; + } + + regmap_write(adv7511->regmap, ADV7511_REG_INT(0), + ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR); + + /* Break this apart, hopefully more I2C controllers will + * support 64 byte transfers than 256 byte transfers + */ + + xfer[0].addr = adv7511->i2c_edid->addr; + xfer[0].flags = 0; + xfer[0].len = 1; + xfer[0].buf = &offset; + xfer[1].addr = adv7511->i2c_edid->addr; + xfer[1].flags = I2C_M_RD; + xfer[1].len = 64; + xfer[1].buf = adv7511->edid_buf; + + offset = 0; + + for (i = 0; i < 4; ++i) { + ret = i2c_transfer(adv7511->i2c_edid->adapter, xfer, + ARRAY_SIZE(xfer)); + if (ret < 0) + return ret; + else if (ret != 2) + return -EIO; + + xfer[1].buf += 64; + offset += 64; + } + + adv7511->current_edid_segment = block / 2; + } + + if (block % 2 == 0) + memcpy(buf, adv7511->edid_buf, len); + else + memcpy(buf, adv7511->edid_buf + 128, len); + + return 0; +} + +/* ----------------------------------------------------------------------------- + * Encoder operations + */ + +static int adv7511_get_modes(struct drm_encoder *encoder, + struct drm_connector *connector) +{ + struct adv7511 *adv7511 = encoder_to_adv7511(encoder); + struct edid *edid; + unsigned int count; + + /* Reading the EDID only works if the device is powered */ + if (adv7511->dpms_mode != DRM_MODE_DPMS_ON) { + regmap_write(adv7511->regmap, ADV7511_REG_INT(0), + ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR); + regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER, + ADV7511_POWER_POWER_DOWN, 0); + adv7511->current_edid_segment = -1; + } + + edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511); + + if (adv7511->dpms_mode != DRM_MODE_DPMS_ON) + regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER, + ADV7511_POWER_POWER_DOWN, + ADV7511_POWER_POWER_DOWN); + + kfree(adv7511->edid); + adv7511->edid = edid; + if (!edid) + return 0; + + drm_mode_connector_update_edid_property(connector, edid); + count = drm_add_edid_modes(connector, edid); + + adv7511_set_config_csc(adv7511, connector, adv7511->rgb); + + return count; +} + +static void adv7511_encoder_dpms(struct drm_encoder *encoder, int mode) +{ + struct adv7511 *adv7511 = encoder_to_adv7511(encoder); + + switch (mode) { + case DRM_MODE_DPMS_ON: + adv7511->current_edid_segment = -1; + + regmap_write(adv7511->regmap, ADV7511_REG_INT(0), + ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR); + regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER, + ADV7511_POWER_POWER_DOWN, 0); + /* + * Per spec it is allowed to pulse the HDP signal to indicate + * that the EDID information has changed. Some monitors do this + * when they wakeup from standby or are enabled. When the HDP + * goes low the adv7511 is reset and the outputs are disabled + * which might cause the monitor to go to standby again. To + * avoid this we ignore the HDP pin for the first few seconds + * after enabeling the output. + */ + regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2, + ADV7511_REG_POWER2_HDP_SRC_MASK, + ADV7511_REG_POWER2_HDP_SRC_NONE); + /* Most of the registers are reset during power down or + * when HPD is low + */ + regcache_sync(adv7511->regmap); + break; + default: + /* TODO: setup additional power down modes */ + regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER, + ADV7511_POWER_POWER_DOWN, + ADV7511_POWER_POWER_DOWN); + regcache_mark_dirty(adv7511->regmap); + break; + } + + adv7511->dpms_mode = mode; +} + +static enum drm_connector_status +adv7511_encoder_detect(struct drm_encoder *encoder, + struct drm_connector *connector) +{ + struct adv7511 *adv7511 = encoder_to_adv7511(encoder); + enum drm_connector_status status; + unsigned int val; + bool hpd; + int ret; + + ret = regmap_read(adv7511->regmap, ADV7511_REG_STATUS, &val); + if (ret < 0) + return connector_status_disconnected; + + if (val & ADV7511_STATUS_HPD) + status = connector_status_connected; + else + status = connector_status_disconnected; + + hpd = adv7511_hpd(adv7511); + + /* The chip resets itself when the cable is disconnected, so in case + * there is a pending HPD interrupt and the cable is connected there was + * at least one transition from disconnected to connected and the chip + * has to be reinitialized. */ + if (status == connector_status_connected && hpd && + adv7511->dpms_mode == DRM_MODE_DPMS_ON) { + regcache_mark_dirty(adv7511->regmap); + adv7511_encoder_dpms(encoder, adv7511->dpms_mode); + adv7511_get_modes(encoder, connector); + if (adv7511->status == connector_status_connected) + status = connector_status_disconnected; + } else { + /* Renable HDP sensing */ + regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2, + ADV7511_REG_POWER2_HDP_SRC_MASK, + ADV7511_REG_POWER2_HDP_SRC_BOTH); + } + + adv7511->status = status; + return status; +} + +static int adv7511_encoder_mode_valid(struct drm_encoder *encoder, + struct drm_display_mode *mode) +{ + if (mode->clock > 165000) + return MODE_CLOCK_HIGH; + + if (mode->flags & DRM_MODE_FLAG_INTERLACE) + return MODE_NO_INTERLACE; + + return MODE_OK; +} + +static void adv7511_encoder_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adj_mode) +{ + struct adv7511 *adv7511 = encoder_to_adv7511(encoder); + unsigned int low_refresh_rate; + unsigned int hsync_polarity = 0; + unsigned int vsync_polarity = 0; + + if (adv7511->embedded_sync) { + unsigned int hsync_offset, hsync_len; + unsigned int vsync_offset, vsync_len; + + hsync_offset = adj_mode->crtc_hsync_start - + adj_mode->crtc_hdisplay; + vsync_offset = adj_mode->crtc_vsync_start - + adj_mode->crtc_vdisplay; + hsync_len = adj_mode->crtc_hsync_end - + adj_mode->crtc_hsync_start; + vsync_len = adj_mode->crtc_vsync_end - + adj_mode->crtc_vsync_start; + + /* The hardware vsync generator has a off-by-one bug */ + vsync_offset += 1; + + regmap_write(adv7511->regmap, ADV7511_REG_HSYNC_PLACEMENT_MSB, + ((hsync_offset >> 10) & 0x7) << 5); + regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(0), + (hsync_offset >> 2) & 0xff); + regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(1), + ((hsync_offset & 0x3) << 6) | + ((hsync_len >> 4) & 0x3f)); + regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(2), + ((hsync_len & 0xf) << 4) | + ((vsync_offset >> 6) & 0xf)); + regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(3), + ((vsync_offset & 0x3f) << 2) | + ((vsync_len >> 8) & 0x3)); + regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(4), + vsync_len & 0xff); + + hsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PHSYNC); + vsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PVSYNC); + } else { + enum adv7511_sync_polarity mode_hsync_polarity; + enum adv7511_sync_polarity mode_vsync_polarity; + + /** + * If the input signal is always low or always high we want to + * invert or let it passthrough depending on the polarity of the + * current mode. + **/ + if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC) + mode_hsync_polarity = ADV7511_SYNC_POLARITY_LOW; + else + mode_hsync_polarity = ADV7511_SYNC_POLARITY_HIGH; + + if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC) + mode_vsync_polarity = ADV7511_SYNC_POLARITY_LOW; + else + mode_vsync_polarity = ADV7511_SYNC_POLARITY_HIGH; + + if (adv7511->hsync_polarity != mode_hsync_polarity && + adv7511->hsync_polarity != + ADV7511_SYNC_POLARITY_PASSTHROUGH) + hsync_polarity = 1; + + if (adv7511->vsync_polarity != mode_vsync_polarity && + adv7511->vsync_polarity != + ADV7511_SYNC_POLARITY_PASSTHROUGH) + vsync_polarity = 1; + } + + if (mode->vrefresh <= 24000) + low_refresh_rate = ADV7511_LOW_REFRESH_RATE_24HZ; + else if (mode->vrefresh <= 25000) + low_refresh_rate = ADV7511_LOW_REFRESH_RATE_25HZ; + else if (mode->vrefresh <= 30000) + low_refresh_rate = ADV7511_LOW_REFRESH_RATE_30HZ; + else + low_refresh_rate = ADV7511_LOW_REFRESH_RATE_NONE; + + regmap_update_bits(adv7511->regmap, 0xfb, + 0x6, low_refresh_rate << 1); + regmap_update_bits(adv7511->regmap, 0x17, + 0x60, (vsync_polarity << 6) | (hsync_polarity << 5)); + + /* + * TODO Test first order 4:2:2 to 4:4:4 up conversion method, which is + * supposed to give better results. + */ + + adv7511->f_tmds = mode->clock; +} + +static struct drm_encoder_slave_funcs adv7511_encoder_funcs = { + .dpms = adv7511_encoder_dpms, + .mode_valid = adv7511_encoder_mode_valid, + .mode_set = adv7511_encoder_mode_set, + .detect = adv7511_encoder_detect, + .get_modes = adv7511_get_modes, +}; + +/* ----------------------------------------------------------------------------- + * Probe & remove + */ + +static int adv7511_parse_dt(struct device_node *np, + struct adv7511_link_config *config) +{ + const char *str; + int ret; + + memset(config, 0, sizeof(*config)); + + of_property_read_u32(np, "adi,input-depth", &config->input_color_depth); + if (config->input_color_depth != 8 && config->input_color_depth != 10 && + config->input_color_depth != 12) + return -EINVAL; + + ret = of_property_read_string(np, "adi,input-colorspace", &str); + if (ret < 0) + return ret; + + if (!strcmp(str, "rgb")) + config->input_colorspace = HDMI_COLORSPACE_RGB; + else if (!strcmp(str, "yuv422")) + config->input_colorspace = HDMI_COLORSPACE_YUV422; + else if (!strcmp(str, "yuv444")) + config->input_colorspace = HDMI_COLORSPACE_YUV444; + else + return -EINVAL; + + ret = of_property_read_string(np, "adi,input-clock", &str); + if (ret < 0) + return ret; + + if (!strcmp(str, "1x")) + config->input_clock = ADV7511_INPUT_CLOCK_1X; + else if (!strcmp(str, "2x")) + config->input_clock = ADV7511_INPUT_CLOCK_2X; + else if (!strcmp(str, "ddr")) + config->input_clock = ADV7511_INPUT_CLOCK_DDR; + else + return -EINVAL; + + if (config->input_colorspace == HDMI_COLORSPACE_YUV422 || + config->input_clock != ADV7511_INPUT_CLOCK_1X) { + ret = of_property_read_u32(np, "adi,input-style", + &config->input_style); + if (ret) + return ret; + + if (config->input_style < 1 || config->input_style > 3) + return -EINVAL; + + ret = of_property_read_string(np, "adi,input-justification", + &str); + if (ret < 0) + return ret; + + if (!strcmp(str, "left")) + config->input_justification = + ADV7511_INPUT_JUSTIFICATION_LEFT; + else if (!strcmp(str, "evenly")) + config->input_justification = + ADV7511_INPUT_JUSTIFICATION_EVENLY; + else if (!strcmp(str, "right")) + config->input_justification = + ADV7511_INPUT_JUSTIFICATION_RIGHT; + else + return -EINVAL; + + } else { + config->input_style = 1; + config->input_justification = ADV7511_INPUT_JUSTIFICATION_LEFT; + } + + of_property_read_u32(np, "adi,clock-delay", &config->clock_delay); + if (config->clock_delay < -1200 || config->clock_delay > 1600) + return -EINVAL; + + config->embedded_sync = of_property_read_bool(np, "adi,embedded-sync"); + + /* Hardcode the sync pulse configurations for now. */ + config->sync_pulse = ADV7511_INPUT_SYNC_PULSE_NONE; + config->vsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH; + config->hsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH; + + return 0; +} + +static const int edid_i2c_addr = 0x7e; +static const int packet_i2c_addr = 0x70; +static const int cec_i2c_addr = 0x78; + +static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id) +{ + struct adv7511_link_config link_config; + struct adv7511 *adv7511; + struct device *dev = &i2c->dev; + unsigned int val; + int ret; + + if (!dev->of_node) + return -EINVAL; + + adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL); + if (!adv7511) + return -ENOMEM; + + adv7511->dpms_mode = DRM_MODE_DPMS_OFF; + adv7511->status = connector_status_disconnected; + + ret = adv7511_parse_dt(dev->of_node, &link_config); + if (ret) + return ret; + + /* + * The power down GPIO is optional. If present, toggle it from active to + * inactive to wake up the encoder. + */ + adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH); + if (IS_ERR(adv7511->gpio_pd)) + return PTR_ERR(adv7511->gpio_pd); + + if (adv7511->gpio_pd) { + mdelay(5); + gpiod_set_value_cansleep(adv7511->gpio_pd, 0); + } + + adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config); + if (IS_ERR(adv7511->regmap)) + return PTR_ERR(adv7511->regmap); + + ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val); + if (ret) + return ret; + dev_dbg(dev, "Rev. %d\n", val); + + ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers, + ARRAY_SIZE(adv7511_fixed_registers)); + if (ret) + return ret; + + regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr); + regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR, + packet_i2c_addr); + regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr); + adv7511_packet_disable(adv7511, 0xffff); + + adv7511->i2c_main = i2c; + adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1); + if (!adv7511->i2c_edid) + return -ENOMEM; + + if (i2c->irq) { + init_waitqueue_head(&adv7511->wq); + + ret = devm_request_threaded_irq(dev, i2c->irq, NULL, + adv7511_irq_handler, + IRQF_ONESHOT, dev_name(dev), + adv7511); + if (ret) + goto err_i2c_unregister_device; + } + + /* CEC is unused for now */ + regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL, + ADV7511_CEC_CTRL_POWER_DOWN); + + regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER, + ADV7511_POWER_POWER_DOWN, ADV7511_POWER_POWER_DOWN); + + adv7511->current_edid_segment = -1; + + i2c_set_clientdata(i2c, adv7511); + + adv7511_set_link_config(adv7511, &link_config); + + return 0; + +err_i2c_unregister_device: + i2c_unregister_device(adv7511->i2c_edid); + + return ret; +} + +static int adv7511_remove(struct i2c_client *i2c) +{ + struct adv7511 *adv7511 = i2c_get_clientdata(i2c); + + i2c_unregister_device(adv7511->i2c_edid); + + kfree(adv7511->edid); + + return 0; +} + +static int adv7511_encoder_init(struct i2c_client *i2c, struct drm_device *dev, + struct drm_encoder_slave *encoder) +{ + + struct adv7511 *adv7511 = i2c_get_clientdata(i2c); + + encoder->slave_priv = adv7511; + encoder->slave_funcs = &adv7511_encoder_funcs; + + adv7511->encoder = &encoder->base; + + return 0; +} + +static const struct i2c_device_id adv7511_i2c_ids[] = { + { "adv7511", 0 }, + { "adv7511w", 0 }, + { "adv7513", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adv7511_i2c_ids); + +static const struct of_device_id adv7511_of_ids[] = { + { .compatible = "adi,adv7511", }, + { .compatible = "adi,adv7511w", }, + { .compatible = "adi,adv7513", }, + { } +}; +MODULE_DEVICE_TABLE(of, adv7511_of_ids); + +static struct drm_i2c_encoder_driver adv7511_driver = { + .i2c_driver = { + .driver = { + .name = "adv7511", + .of_match_table = adv7511_of_ids, + }, + .id_table = adv7511_i2c_ids, + .probe = adv7511_probe, + .remove = adv7511_remove, + }, + + .encoder_init = adv7511_encoder_init, +}; + +static int __init adv7511_init(void) +{ + return drm_i2c_encoder_register(THIS_MODULE, &adv7511_driver); +} +module_init(adv7511_init); + +static void __exit adv7511_exit(void) +{ + drm_i2c_encoder_unregister(&adv7511_driver); +} +module_exit(adv7511_exit); + +MODULE_AUTHOR("Lars-Peter Clausen lars@metafoo.de"); +MODULE_DESCRIPTION("ADV7511 HDMI transmitter driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/i2c/adv7511.h b/drivers/gpu/drm/i2c/adv7511.h new file mode 100644 index 000000000000..6599ed538426 --- /dev/null +++ b/drivers/gpu/drm/i2c/adv7511.h @@ -0,0 +1,289 @@ +/* + * Analog Devices ADV7511 HDMI transmitter driver + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef __DRM_I2C_ADV7511_H__ +#define __DRM_I2C_ADV7511_H__ + +#include <linux/hdmi.h> + +#define ADV7511_REG_CHIP_REVISION 0x00 +#define ADV7511_REG_N0 0x01 +#define ADV7511_REG_N1 0x02 +#define ADV7511_REG_N2 0x03 +#define ADV7511_REG_SPDIF_FREQ 0x04 +#define ADV7511_REG_CTS_AUTOMATIC1 0x05 +#define ADV7511_REG_CTS_AUTOMATIC2 0x06 +#define ADV7511_REG_CTS_MANUAL0 0x07 +#define ADV7511_REG_CTS_MANUAL1 0x08 +#define ADV7511_REG_CTS_MANUAL2 0x09 +#define ADV7511_REG_AUDIO_SOURCE 0x0a +#define ADV7511_REG_AUDIO_CONFIG 0x0b +#define ADV7511_REG_I2S_CONFIG 0x0c +#define ADV7511_REG_I2S_WIDTH 0x0d +#define ADV7511_REG_AUDIO_SUB_SRC0 0x0e +#define ADV7511_REG_AUDIO_SUB_SRC1 0x0f +#define ADV7511_REG_AUDIO_SUB_SRC2 0x10 +#define ADV7511_REG_AUDIO_SUB_SRC3 0x11 +#define ADV7511_REG_AUDIO_CFG1 0x12 +#define ADV7511_REG_AUDIO_CFG2 0x13 +#define ADV7511_REG_AUDIO_CFG3 0x14 +#define ADV7511_REG_I2C_FREQ_ID_CFG 0x15 +#define ADV7511_REG_VIDEO_INPUT_CFG1 0x16 +#define ADV7511_REG_CSC_UPPER(x) (0x18 + (x) * 2) +#define ADV7511_REG_CSC_LOWER(x) (0x19 + (x) * 2) +#define ADV7511_REG_SYNC_DECODER(x) (0x30 + (x)) +#define ADV7511_REG_DE_GENERATOR (0x35 + (x)) +#define ADV7511_REG_PIXEL_REPETITION 0x3b +#define ADV7511_REG_VIC_MANUAL 0x3c +#define ADV7511_REG_VIC_SEND 0x3d +#define ADV7511_REG_VIC_DETECTED 0x3e +#define ADV7511_REG_AUX_VIC_DETECTED 0x3f +#define ADV7511_REG_PACKET_ENABLE0 0x40 +#define ADV7511_REG_POWER 0x41 +#define ADV7511_REG_STATUS 0x42 +#define ADV7511_REG_EDID_I2C_ADDR 0x43 +#define ADV7511_REG_PACKET_ENABLE1 0x44 +#define ADV7511_REG_PACKET_I2C_ADDR 0x45 +#define ADV7511_REG_DSD_ENABLE 0x46 +#define ADV7511_REG_VIDEO_INPUT_CFG2 0x48 +#define ADV7511_REG_INFOFRAME_UPDATE 0x4a +#define ADV7511_REG_GC(x) (0x4b + (x)) /* 0x4b - 0x51 */ +#define ADV7511_REG_AVI_INFOFRAME_VERSION 0x52 +#define ADV7511_REG_AVI_INFOFRAME_LENGTH 0x53 +#define ADV7511_REG_AVI_INFOFRAME_CHECKSUM 0x54 +#define ADV7511_REG_AVI_INFOFRAME(x) (0x55 + (x)) /* 0x55 - 0x6f */ +#define ADV7511_REG_AUDIO_INFOFRAME_VERSION 0x70 +#define ADV7511_REG_AUDIO_INFOFRAME_LENGTH 0x71 +#define ADV7511_REG_AUDIO_INFOFRAME_CHECKSUM 0x72 +#define ADV7511_REG_AUDIO_INFOFRAME(x) (0x73 + (x)) /* 0x73 - 0x7c */ +#define ADV7511_REG_INT_ENABLE(x) (0x94 + (x)) +#define ADV7511_REG_INT(x) (0x96 + (x)) +#define ADV7511_REG_INPUT_CLK_DIV 0x9d +#define ADV7511_REG_PLL_STATUS 0x9e +#define ADV7511_REG_HDMI_POWER 0xa1 +#define ADV7511_REG_HDCP_HDMI_CFG 0xaf +#define ADV7511_REG_AN(x) (0xb0 + (x)) /* 0xb0 - 0xb7 */ +#define ADV7511_REG_HDCP_STATUS 0xb8 +#define ADV7511_REG_BCAPS 0xbe +#define ADV7511_REG_BKSV(x) (0xc0 + (x)) /* 0xc0 - 0xc3 */ +#define ADV7511_REG_EDID_SEGMENT 0xc4 +#define ADV7511_REG_DDC_STATUS 0xc8 +#define ADV7511_REG_EDID_READ_CTRL 0xc9 +#define ADV7511_REG_BSTATUS(x) (0xca + (x)) /* 0xca - 0xcb */ +#define ADV7511_REG_TIMING_GEN_SEQ 0xd0 +#define ADV7511_REG_POWER2 0xd6 +#define ADV7511_REG_HSYNC_PLACEMENT_MSB 0xfa + +#define ADV7511_REG_SYNC_ADJUSTMENT(x) (0xd7 + (x)) /* 0xd7 - 0xdc */ +#define ADV7511_REG_TMDS_CLOCK_INV 0xde +#define ADV7511_REG_ARC_CTRL 0xdf +#define ADV7511_REG_CEC_I2C_ADDR 0xe1 +#define ADV7511_REG_CEC_CTRL 0xe2 +#define ADV7511_REG_CHIP_ID_HIGH 0xf5 +#define ADV7511_REG_CHIP_ID_LOW 0xf6 + +#define ADV7511_CSC_ENABLE BIT(7) +#define ADV7511_CSC_UPDATE_MODE BIT(5) + +#define ADV7511_INT0_HDP BIT(7) +#define ADV7511_INT0_VSYNC BIT(5) +#define ADV7511_INT0_AUDIO_FIFO_FULL BIT(4) +#define ADV7511_INT0_EDID_READY BIT(2) +#define ADV7511_INT0_HDCP_AUTHENTICATED BIT(1) + +#define ADV7511_INT1_DDC_ERROR BIT(7) +#define ADV7511_INT1_BKSV BIT(6) +#define ADV7511_INT1_CEC_TX_READY BIT(5) +#define ADV7511_INT1_CEC_TX_ARBIT_LOST BIT(4) +#define ADV7511_INT1_CEC_TX_RETRY_TIMEOUT BIT(3) +#define ADV7511_INT1_CEC_RX_READY3 BIT(2) +#define ADV7511_INT1_CEC_RX_READY2 BIT(1) +#define ADV7511_INT1_CEC_RX_READY1 BIT(0) + +#define ADV7511_ARC_CTRL_POWER_DOWN BIT(0) + +#define ADV7511_CEC_CTRL_POWER_DOWN BIT(0) + +#define ADV7511_POWER_POWER_DOWN BIT(6) + +#define ADV7511_HDMI_CFG_MODE_MASK 0x2 +#define ADV7511_HDMI_CFG_MODE_DVI 0x0 +#define ADV7511_HDMI_CFG_MODE_HDMI 0x2 + +#define ADV7511_AUDIO_SELECT_I2C 0x0 +#define ADV7511_AUDIO_SELECT_SPDIF 0x1 +#define ADV7511_AUDIO_SELECT_DSD 0x2 +#define ADV7511_AUDIO_SELECT_HBR 0x3 +#define ADV7511_AUDIO_SELECT_DST 0x4 + +#define ADV7511_I2S_SAMPLE_LEN_16 0x2 +#define ADV7511_I2S_SAMPLE_LEN_20 0x3 +#define ADV7511_I2S_SAMPLE_LEN_18 0x4 +#define ADV7511_I2S_SAMPLE_LEN_22 0x5 +#define ADV7511_I2S_SAMPLE_LEN_19 0x8 +#define ADV7511_I2S_SAMPLE_LEN_23 0x9 +#define ADV7511_I2S_SAMPLE_LEN_24 0xb +#define ADV7511_I2S_SAMPLE_LEN_17 0xc +#define ADV7511_I2S_SAMPLE_LEN_21 0xd + +#define ADV7511_SAMPLE_FREQ_44100 0x0 +#define ADV7511_SAMPLE_FREQ_48000 0x2 +#define ADV7511_SAMPLE_FREQ_32000 0x3 +#define ADV7511_SAMPLE_FREQ_88200 0x8 +#define ADV7511_SAMPLE_FREQ_96000 0xa +#define ADV7511_SAMPLE_FREQ_176400 0xc +#define ADV7511_SAMPLE_FREQ_192000 0xe + +#define ADV7511_STATUS_POWER_DOWN_POLARITY BIT(7) +#define ADV7511_STATUS_HPD BIT(6) +#define ADV7511_STATUS_MONITOR_SENSE BIT(5) +#define ADV7511_STATUS_I2S_32BIT_MODE BIT(3) + +#define ADV7511_PACKET_ENABLE_N_CTS BIT(8+6) +#define ADV7511_PACKET_ENABLE_AUDIO_SAMPLE BIT(8+5) +#define ADV7511_PACKET_ENABLE_AVI_INFOFRAME BIT(8+4) +#define ADV7511_PACKET_ENABLE_AUDIO_INFOFRAME BIT(8+3) +#define ADV7511_PACKET_ENABLE_GC BIT(7) +#define ADV7511_PACKET_ENABLE_SPD BIT(6) +#define ADV7511_PACKET_ENABLE_MPEG BIT(5) +#define ADV7511_PACKET_ENABLE_ACP BIT(4) +#define ADV7511_PACKET_ENABLE_ISRC BIT(3) +#define ADV7511_PACKET_ENABLE_GM BIT(2) +#define ADV7511_PACKET_ENABLE_SPARE2 BIT(1) +#define ADV7511_PACKET_ENABLE_SPARE1 BIT(0) + +#define ADV7511_REG_POWER2_HDP_SRC_MASK 0xc0 +#define ADV7511_REG_POWER2_HDP_SRC_BOTH 0x00 +#define ADV7511_REG_POWER2_HDP_SRC_HDP 0x40 +#define ADV7511_REG_POWER2_HDP_SRC_CEC 0x80 +#define ADV7511_REG_POWER2_HDP_SRC_NONE 0xc0 +#define ADV7511_REG_POWER2_TDMS_ENABLE BIT(4) +#define ADV7511_REG_POWER2_GATE_INPUT_CLK BIT(0) + +#define ADV7511_LOW_REFRESH_RATE_NONE 0x0 +#define ADV7511_LOW_REFRESH_RATE_24HZ 0x1 +#define ADV7511_LOW_REFRESH_RATE_25HZ 0x2 +#define ADV7511_LOW_REFRESH_RATE_30HZ 0x3 + +#define ADV7511_AUDIO_CFG3_LEN_MASK 0x0f +#define ADV7511_I2C_FREQ_ID_CFG_RATE_MASK 0xf0 + +#define ADV7511_AUDIO_SOURCE_I2S 0 +#define ADV7511_AUDIO_SOURCE_SPDIF 1 + +#define ADV7511_I2S_FORMAT_I2S 0 +#define ADV7511_I2S_FORMAT_RIGHT_J 1 +#define ADV7511_I2S_FORMAT_LEFT_J 2 + +#define ADV7511_PACKET(p, x) ((p) * 0x20 + (x)) +#define ADV7511_PACKET_SDP(x) ADV7511_PACKET(0, x) +#define ADV7511_PACKET_MPEG(x) ADV7511_PACKET(1, x) +#define ADV7511_PACKET_ACP(x) ADV7511_PACKET(2, x) +#define ADV7511_PACKET_ISRC1(x) ADV7511_PACKET(3, x) +#define ADV7511_PACKET_ISRC2(x) ADV7511_PACKET(4, x) +#define ADV7511_PACKET_GM(x) ADV7511_PACKET(5, x) +#define ADV7511_PACKET_SPARE(x) ADV7511_PACKET(6, x) + +enum adv7511_input_clock { + ADV7511_INPUT_CLOCK_1X, + ADV7511_INPUT_CLOCK_2X, + ADV7511_INPUT_CLOCK_DDR, +}; + +enum adv7511_input_justification { + ADV7511_INPUT_JUSTIFICATION_EVENLY = 0, + ADV7511_INPUT_JUSTIFICATION_RIGHT = 1, + ADV7511_INPUT_JUSTIFICATION_LEFT = 2, +}; + +enum adv7511_input_sync_pulse { + ADV7511_INPUT_SYNC_PULSE_DE = 0, + ADV7511_INPUT_SYNC_PULSE_HSYNC = 1, + ADV7511_INPUT_SYNC_PULSE_VSYNC = 2, + ADV7511_INPUT_SYNC_PULSE_NONE = 3, +}; + +/** + * enum adv7511_sync_polarity - Polarity for the input sync signals + * @ADV7511_SYNC_POLARITY_PASSTHROUGH: Sync polarity matches that of + * the currently configured mode. + * @ADV7511_SYNC_POLARITY_LOW: Sync polarity is low + * @ADV7511_SYNC_POLARITY_HIGH: Sync polarity is high + * + * If the polarity is set to either LOW or HIGH the driver will configure the + * ADV7511 to internally invert the sync signal if required to match the sync + * polarity setting for the currently selected output mode. + * + * If the polarity is set to PASSTHROUGH, the ADV7511 will route the signal + * unchanged. This is used when the upstream graphics core already generates + * the sync signals with the correct polarity. + */ +enum adv7511_sync_polarity { + ADV7511_SYNC_POLARITY_PASSTHROUGH, + ADV7511_SYNC_POLARITY_LOW, + ADV7511_SYNC_POLARITY_HIGH, +}; + +/** + * struct adv7511_link_config - Describes adv7511 hardware configuration + * @input_color_depth: Number of bits per color component (8, 10 or 12) + * @input_colorspace: The input colorspace (RGB, YUV444, YUV422) + * @input_clock: The input video clock style (1x, 2x, DDR) + * @input_style: The input component arrangement variant + * @input_justification: Video input format bit justification + * @clock_delay: Clock delay for the input clock (in ps) + * @embedded_sync: Video input uses BT.656-style embedded sync + * @sync_pulse: Select the sync pulse + * @vsync_polarity: vsync input signal configuration + * @hsync_polarity: hsync input signal configuration + */ +struct adv7511_link_config { + unsigned int input_color_depth; + enum hdmi_colorspace input_colorspace; + enum adv7511_input_clock input_clock; + unsigned int input_style; + enum adv7511_input_justification input_justification; + + int clock_delay; + + bool embedded_sync; + enum adv7511_input_sync_pulse sync_pulse; + enum adv7511_sync_polarity vsync_polarity; + enum adv7511_sync_polarity hsync_polarity; +}; + +/** + * enum adv7511_csc_scaling - Scaling factor for the ADV7511 CSC + * @ADV7511_CSC_SCALING_1: CSC results are not scaled + * @ADV7511_CSC_SCALING_2: CSC results are scaled by a factor of two + * @ADV7511_CSC_SCALING_4: CSC results are scalled by a factor of four + */ +enum adv7511_csc_scaling { + ADV7511_CSC_SCALING_1 = 0, + ADV7511_CSC_SCALING_2 = 1, + ADV7511_CSC_SCALING_4 = 2, +}; + +/** + * struct adv7511_video_config - Describes adv7511 hardware configuration + * @csc_enable: Whether to enable color space conversion + * @csc_scaling_factor: Color space conversion scaling factor + * @csc_coefficents: Color space conversion coefficents + * @hdmi_mode: Whether to use HDMI or DVI output mode + * @avi_infoframe: HDMI infoframe + */ +struct adv7511_video_config { + bool csc_enable; + enum adv7511_csc_scaling csc_scaling_factor; + const uint16_t *csc_coefficents; + + bool hdmi_mode; + struct hdmi_avi_infoframe avi_infoframe; +}; + +#endif /* __DRM_I2C_ADV7511_H__ */