Re: [PATCH 5/5] drm/i915: remove intel_pipe_set_base()

2014-09-19 Ville Syrjälä ville.syrjala@linux.intel.com:

On Thu, Sep 18, 2014 at 04:43:16PM -0300, Gustavo Padovan wrote:

...

From: Gustavo Padovan gustavo.padovan@collabora.co.uk

After some refactor intel_primary_plane_setplane() does the same as intel_pipe_set_base() so we can get rid of it and replace the calls with intel_primary_plane_setplane().

Signed-off-by: Gustavo Padovan gustavo.padovan@collabora.co.uk

drivers/gpu/drm/i915/intel_display.c | 79 ++++-------------------------------- 1 file changed, 8 insertions(+), 71 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 6c61c8f..2477587 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2763,74 +2763,6 @@ static void intel_update_pipe_size(struct intel_crtc *crtc) crtc->config.pipe_src_h = adjusted_mode->crtc_vdisplay; }

-static int -intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,

•     struct drm_framebuffer *fb)
  

-{

• struct drm_device *dev = crtc->dev;
• struct drm_i915_private *dev_priv = dev->dev_private;
• struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
• enum pipe pipe = intel_crtc->pipe;
• struct drm_framebuffer *old_fb = crtc->primary->fb;
• struct drm_i915_gem_object *obj = intel_fb_obj(fb);
• struct drm_i915_gem_object *old_obj = intel_fb_obj(old_fb);
• int ret;
• if (intel_crtc_has_pending_flip(crtc)) {

• DRM_ERROR("pipe is still busy with an old pageflip\n");
  

• return -EBUSY;
  

• }
• /* no fb bound */
• if (!fb) {

• DRM_ERROR("No FB bound\n");
  

• return 0;
  

• }
• if (intel_crtc->plane > INTEL_INFO(dev)->num_pipes) {

• DRM_ERROR("no plane for crtc: plane %c, num_pipes %d\n",
  

• 	  plane_name(intel_crtc->plane),
  

• 	  INTEL_INFO(dev)->num_pipes);
  

• return -EINVAL;
  

• }
• mutex_lock(&dev->struct_mutex);
• ret = intel_pin_and_fence_fb_obj(dev, obj, NULL);
• if (ret == 0)

• i915_gem_track_fb(old_obj, obj,
  

• 		  INTEL_FRONTBUFFER_PRIMARY(pipe));
  

• mutex_unlock(&dev->struct_mutex);
• if (ret != 0) {

• DRM_ERROR("pin & fence failed\n");
  

• return ret;
  

• }
• intel_update_pipe_size(intel_crtc);
• dev_priv->display.update_primary_plane(crtc, fb, x, y);
• if (intel_crtc->active)

• intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_PRIMARY(pipe));
  

• crtc->primary->fb = fb;
• crtc->x = x;
• crtc->y = y;
• if (old_fb) {

• if (intel_crtc->active && old_fb != fb)
  

• 	intel_wait_for_vblank(dev, intel_crtc->pipe);
  

• mutex_lock(&dev->struct_mutex);
  

• intel_unpin_fb_obj(old_obj);
  

• mutex_unlock(&dev->struct_mutex);
  

• }
• mutex_lock(&dev->struct_mutex);
• intel_update_fbc(dev);
• mutex_unlock(&dev->struct_mutex);
• return 0;

-}

static void intel_fdi_normal_train(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; @@ -9797,6 +9729,7 @@ static int intel_crtc_commit_page_flip(struct drm_crtc *crtc, struct drm_framebuffer *old_fb = crtc->primary->fb; struct drm_i915_gem_object *obj = intel_fb_obj(fb); struct intel_crtc *intel_crtc = to_intel_crtc(crtc);

• struct drm_plane *primary = crtc->primary; enum pipe pipe = intel_crtc->pipe; struct intel_unpin_work *work; struct intel_engine_cs *ring;

@@ -9938,7 +9871,9 @@ free_work: if (ret == -EIO) { out_hang: intel_crtc_wait_for_pending_flips(crtc);

• ret = intel_pipe_set_base(crtc, crtc->x, crtc->y, fb);
  

• ret = primary->funcs->update_plane(primary, crtc, fb,
  

• 				   0, 0, 0, 0,
  

• 				   crtc->x, crtc->y, 0, 0);
  

I think we want page flips to not change the current plane setup so these should be: intel_plane->crtc_x/y/w/h intel_plane->src_x/y/w/h

Okay.

...

if (ret == 0 && event) {
	spin_lock_irq(&dev->event_lock);
	drm_send_vblank_event(dev, pipe, event);

@@ -11475,11 +11410,13 @@ static int intel_crtc_set_config(struct drm_mode_set *set) set->x, set->y, set->fb); } else if (config->fb_changed) { struct intel_crtc *intel_crtc = to_intel_crtc(set->crtc);

• struct drm_plane *primary = set->crtc->primary;
  
  

  intel_crtc_wait_for_pending_flips(set->crtc);

• ret = intel_pipe_set_base(set->crtc,
  

• 			  set->x, set->y, set->fb);
  

• ret = primary->funcs->update_plane(primary, set->crtc, set->fb,
  

• 				   0, 0, 0, 0,
  

• 				   set->x, set->y, 0, 0);
  

And these should really be: 0, 0, hdisplay, vdisplay, set->x << 16, set->y << 16, hdisplay << 16, vdisplay << 16,

Oh, one extra complication here is the stereo modes, so I think we'll be needing to borrow the stereo doubling trick from intel_modeset_pipe_config() to adjust hdisplay/vdisplay when appropriate.

I see, so just calling intel_modeset_pipe_config() and getting pipe_config's pipe_src_w and pipe_src_h will fix the problem?

And we'll be needing something also for the full modeset path so that intel_plane->crtc_* and intel_plane->src_* get initialized properly. Perhaps it's enough to rip out the fb pin/unpin stuff from __intel_set_mode() and just replace it with a call to ->update_plane().

I see. Is it okay to update the primary planes from there?

Gustavo