Hi,
This is another attempt at supporting the HDMI YUV output in the vc4 HDMI driver.
This is a follow-up of https://lore.kernel.org/dri-devel/20210317154352.732095-1-maxime@cerno.tech/
And the discussions that occured recently on the mailing lists and IRC about this.
The series mentioned above had multiple issues, the main one being that it was a bit too much complicated for what we wanted to achieve. This series is taking a much simpler approach with an ad-hoc solution.
I think some parts of it could still be moved to KMS helpers (notably, the output format enum, and the helper to set the infoframe for it) and structures (the output format stored in drm_connector_state). This would also interact nicely with the work done here:
https://lore.kernel.org/dri-devel/20211118103814.524670-1-maxime@cerno.tech/
This can come as a second step though.
The other issues with the first attempt was that nothing was reported to userspace about the decision we made about the format, and that this decision was essentially policy, without any way for the userspace to influence it.
Those two points however are being worked on by Werner in a cross-driver effort:
https://lore.kernel.org/dri-devel/e452775c-5b95-bbfd-e818-f1480f556336@tuxed...
Since it's a KMS decision, I don't think we should hold off any driver as long as it's consistent with what the other drivers are doing.
Let me know what you think, Maxime
---
Changes from v5: - Renamed pixel_rate to tmds_char_rate - used do_div when necessary - Used limited range YUV matrixes - Rebased on current drm-misc-next
Changes from v4: - Fix a clock calculation - Rebased on latest drm-misc-next tag
Changes from v3: - Rebased on latest next - Fixed build error
Changes from v2: - Rename the output format enum - Split the edid_hdmi_dc_modes in two for RGB444 and YUV444 - Remove color_formats modifications from _parse_deep_color entirely - Fixed comment formatting - Fixed mode_valid that would always return true - Fixed max_tmds_clock handling
Changes from v1: - Fixed an EDID parsing error for YUV422 - Fixed the scrambling setup when using a bpc > 8 - Added some logging - Fixed some build-bot warnings - Fixed a number of HDMI specifications and EDID issues - Try to max out the bpc every time
Maxime Ripard (7): drm/vc4: hdmi: Rename pixel_rate variable drm/vc4: hdmi: Move clock validation to its own function drm/vc4: hdmi: Move clock calculation into its own function drm/vc4: hdmi: Take the sink maximum TMDS clock into account drm/vc4: hdmi: Take bpp into account for the scrambler drm/vc4: hdmi: Always try to have the highest bpc drm/vc4: hdmi: Support HDMI YUV output
drivers/gpu/drm/vc4/vc4_hdmi.c | 429 +++++++++++++++++++++++++--- drivers/gpu/drm/vc4/vc4_hdmi.h | 23 +- drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 2 +- drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 6 + drivers/gpu/drm/vc4/vc4_regs.h | 16 ++ 5 files changed, 427 insertions(+), 49 deletions(-)