This reverts commit c9ea564f3d9dd20d88bd34f40a6ff6d31a0d7e8c.
Signed-off-by: Yongqiang Niu yongqiang.niu@mediatek.com --- drivers/mailbox/mtk-cmdq-mailbox.c | 80 +++++++++++++++++++++++++++++++++----- 1 file changed, 71 insertions(+), 9 deletions(-)
diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c index 5665b6e..e0d9a86 100644 --- a/drivers/mailbox/mtk-cmdq-mailbox.c +++ b/drivers/mailbox/mtk-cmdq-mailbox.c @@ -56,6 +56,7 @@ struct cmdq_thread { void __iomem *base; struct list_head task_busy_list; u32 priority; + bool atomic_exec; };
struct cmdq_task { @@ -168,18 +169,56 @@ static void cmdq_task_insert_into_thread(struct cmdq_task *task) dma_sync_single_for_cpu(dev, prev_task->pa_base, prev_task->pkt->cmd_buf_size, DMA_TO_DEVICE); prev_task_base[CMDQ_NUM_CMD(prev_task->pkt) - 1] = - (u64)CMDQ_JUMP_BY_PA << 32 | task->pa_base; + (u64)CMDQ_JUMP_BY_PA << 32 | + (task->pa_base >> task->cmdq->shift_pa); dma_sync_single_for_device(dev, prev_task->pa_base, prev_task->pkt->cmd_buf_size, DMA_TO_DEVICE);
cmdq_thread_invalidate_fetched_data(thread); }
+static bool cmdq_command_is_wfe(u64 cmd) +{ + u64 wfe_option = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE; + u64 wfe_op = (u64)(CMDQ_CODE_WFE << CMDQ_OP_CODE_SHIFT) << 32; + u64 wfe_mask = (u64)CMDQ_OP_CODE_MASK << 32 | 0xffffffff; + + return ((cmd & wfe_mask) == (wfe_op | wfe_option)); +} + +/* we assume tasks in the same display GCE thread are waiting the same event. */ +static void cmdq_task_remove_wfe(struct cmdq_task *task) +{ + struct device *dev = task->cmdq->mbox.dev; + u64 *base = task->pkt->va_base; + int i; + + dma_sync_single_for_cpu(dev, task->pa_base, task->pkt->cmd_buf_size, + DMA_TO_DEVICE); + for (i = 0; i < CMDQ_NUM_CMD(task->pkt); i++) + if (cmdq_command_is_wfe(base[i])) + base[i] = (u64)CMDQ_JUMP_BY_OFFSET << 32 | + (CMDQ_JUMP_PASS >> task->cmdq->shift_pa); + dma_sync_single_for_device(dev, task->pa_base, task->pkt->cmd_buf_size, + DMA_TO_DEVICE); +} + static bool cmdq_thread_is_in_wfe(struct cmdq_thread *thread) { return readl(thread->base + CMDQ_THR_WAIT_TOKEN) & CMDQ_THR_IS_WAITING; }
+static void cmdq_thread_wait_end(struct cmdq_thread *thread, + unsigned long end_pa) +{ + struct device *dev = thread->chan->mbox->dev; + unsigned long curr_pa; + + if (readl_poll_timeout_atomic(thread->base + CMDQ_THR_CURR_ADDR, + curr_pa, curr_pa == end_pa, 1, 20)) + dev_err(dev, "GCE thread cannot run to end.\n"); +} + static void cmdq_task_exec_done(struct cmdq_task *task, enum cmdq_cb_status sta) { struct cmdq_task_cb *cb = &task->pkt->async_cb; @@ -371,15 +410,37 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data) cmdq->shift_pa; end_pa = readl(thread->base + CMDQ_THR_END_ADDR) << cmdq->shift_pa; - /* check boundary */ - if (curr_pa == end_pa - CMDQ_INST_SIZE || - curr_pa == end_pa) { - /* set to this task directly */ - writel(task->pa_base >> cmdq->shift_pa, - thread->base + CMDQ_THR_CURR_ADDR); + + /* + * Atomic execution should remove the following wfe, i.e. only + * wait event at first task, and prevent to pause when running. + */ + if (thread->atomic_exec) { + /* GCE is executing if command is not WFE */ + if (!cmdq_thread_is_in_wfe(thread)) { + cmdq_thread_resume(thread); + cmdq_thread_wait_end(thread, + end_pa >> cmdq->shift_pa); + WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0); + /* set to this task directly */ + writel(task->pa_base >> cmdq->shift_pa, + thread->base + CMDQ_THR_CURR_ADDR); + } else { + cmdq_task_insert_into_thread(task); + cmdq_task_remove_wfe(task); + smp_mb(); /* modify jump before enable thread */ + } } else { - cmdq_task_insert_into_thread(task); - smp_mb(); /* modify jump before enable thread */ + /* check boundary */ + if (curr_pa == end_pa - CMDQ_INST_SIZE || + curr_pa == end_pa) { + /* set to this task directly */ + writel(task->pa_base >> cmdq->shift_pa, + thread->base + CMDQ_THR_CURR_ADDR); + } else { + cmdq_task_insert_into_thread(task); + smp_mb(); /* modify jump before enable thread */ + } } writel((task->pa_base + pkt->cmd_buf_size) >> cmdq->shift_pa, thread->base + CMDQ_THR_END_ADDR); @@ -500,6 +561,7 @@ static struct mbox_chan *cmdq_xlate(struct mbox_controller *mbox,
thread = (struct cmdq_thread *)mbox->chans[ind].con_priv; thread->priority = sp->args[1]; + thread->atomic_exec = (sp->args[2] != 0); thread->chan = &mbox->chans[ind];
return &mbox->chans[ind];