Hello Jitao,
Can't we add this panel information in device tree file instead inside the device driver ?
Regards Sanjeev Sharma
On Mon, Feb 22, 2016 at 4:31 PM, Jitao Shi jitao.shi@mediatek.com wrote:
The LG lp120up1 TFT LCD panel with eDP interface is a 12.0" 1920x1280 panel, which can be supported by the simple panel driver
Signed-off-by: Jitao Shi jitao.shi@mediatek.com
Changes since v1:
- Add eDP panel type in comment msg
- Fixed comment msg with 72 characters width
drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index f88a631..2030c37 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -982,6 +982,29 @@ static const struct panel_desc lg_lb070wv8 = { .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, };
+static const struct drm_display_mode lg_lp120up1_mode = {
.clock = 162300,.hdisplay = 1920,.hsync_start = 1920 + 40,.hsync_end = 1920 + 40 + 40,.htotal = 1920 + 40 + 40+ 80,.vdisplay = 1280,.vsync_start = 1280 + 4,.vsync_end = 1280 + 4 + 4,.vtotal = 1280 + 4 + 4 + 12,.vrefresh = 60,+};
+static const struct panel_desc lg_lp120up1 = {
.modes = &lg_lp120up1_mode,.num_modes = 1,.bpc = 8,.size = {.width = 267,.height = 183,},+};
static const struct drm_display_mode lg_lp129qe_mode = { .clock = 285250, .hdisplay = 2560, @@ -1256,6 +1279,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "lg,lb070wv8", .data = &lg_lb070wv8, }, {
.compatible = "lg,lp120up1",.data = &lg_lp120up1,}, { .compatible = "lg,lp129qe", .data = &lg_lp129qe, }, {-- 1.7.9.5
linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel