On Wed, Jan 13, 2021 at 9:31 AM Daniel Vetter daniel@ffwll.ch wrote:
On Wed, Jan 13, 2021 at 2:39 PM Sean Paul sean@poorly.run wrote:
On Wed, Jan 13, 2021 at 5:34 AM Anshuman Gupta anshuman.gupta@intel.com wrote:
On 2021-01-07 at 04:08:58 +0530, Sean Paul wrote:
From: Sean Paul seanpaul@chromium.org
The HDCP 1.4 spec does not require the QUERY_STREAM_ENCRYPTION_STATUS
IMHO DP 1.4 vesa specs I.3.5 mark QSES as desirale for both HDCP 1.4 and HDCP 2.2. "The MST Source device may use a QUERY_STREAM_ENCRYPTION_STATUS message transaction to query the downstream status for a particular stream."
I feel it useful for scenario in which a non hdcp supported monitor is hot plugged to MST branch. Source really doesn't know about the hdcp capable device on MST branch, it just know the capability of immediate downstream device. QSES can fetch the HDCP capability from MST topology. We don't require to enable stream encryption for such streams.
I agree it's useful when it works, but unfortunately it's broken on at least 2 MST bridge chips I've encountered :/
Until we can figure out a) how to fix them (ie: firmware updates), or b) how to enumerate all of the broken chips to create quirks, we probably just want to disable QSES for HDCP 1.4.
What happens when the user plugs in a non-hdcp screen into a hub which doesn't do QSES? Just black screen?
Good question, thanks for forcing me to explain myself more thoroughly :)
This patch doesn't change that behavior, QSES is currently only used as a means for verifying the stream continues to be encrypted in steady-state (ie: after auth has already completed and the pixels are flowing).
If one wanted to check HDCP 1.4 capability upfront, QSES wouldn't be the way to do it. Instead you would tunnel a remote DPCD to the sink to read the BCAPS register (ie: the same way we check non-MST connectors).
So QSES is currently only around in HDCP 1.4 as an extra precaution against a bug in the code preventing the MST stream from being encrypted. IMO broken HW overrules suspenders when we already have a belt :)
Sean
That would suck a bit, otoh with broken hw I don't see how we could do better :-/ -Daniel
Sean
check, it was always a nice-to-have. After deploying this across various devices, we've determined that some MST bridge chips do not properly support this call for HDCP 1.4 (namely Synaptics and Realtek).
I had considered creating a quirk for this, but I think it's more prudent to just disable the check entirely since I don't have an idea how widespread support is.
May be we can remove it from the link check and can retain as utility ? Thanks, Anshuman Gupta.
Signed-off-by: Sean Paul seanpaul@chromium.org
drivers/gpu/drm/i915/display/intel_dp_hdcp.c | 26 +------------------- 1 file changed, 1 insertion(+), 25 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c index 03424d20e9f7..b6a9606bf09a 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c +++ b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c @@ -640,30 +640,6 @@ intel_dp_mst_hdcp_toggle_signalling(struct intel_digital_port *dig_port, return ret; }
-static -bool intel_dp_mst_hdcp_check_link(struct intel_digital_port *dig_port,
struct intel_connector *connector)-{
struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);struct intel_dp *intel_dp = &dig_port->dp;struct drm_dp_query_stream_enc_status_ack_reply reply;int ret;if (!intel_dp_hdcp_check_link(dig_port, connector))return false;ret = drm_dp_send_query_stream_enc_status(&intel_dp->mst_mgr,connector->port, &reply);if (ret) {drm_dbg_kms(&i915->drm,"[CONNECTOR:%d:%s] failed QSES ret=%d\n",connector->base.base.id, connector->base.name, ret);return false;}return reply.auth_completed && reply.encryption_enabled;-}
static const struct intel_hdcp_shim intel_dp_mst_hdcp_shim = { .write_an_aksv = intel_dp_hdcp_write_an_aksv, .read_bksv = intel_dp_hdcp_read_bksv, @@ -674,7 +650,7 @@ static const struct intel_hdcp_shim intel_dp_mst_hdcp_shim = { .read_ksv_fifo = intel_dp_hdcp_read_ksv_fifo, .read_v_prime_part = intel_dp_hdcp_read_v_prime_part, .toggle_signalling = intel_dp_mst_hdcp_toggle_signalling,
.check_link = intel_dp_mst_hdcp_check_link,
.check_link = intel_dp_hdcp_check_link, .hdcp_capable = intel_dp_hdcp_capable, .protocol = HDCP_PROTOCOL_DP,-- Sean Paul, Software Engineer, Google / Chromium OS
Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
-- Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch