The previous hardware behaviour was kept if the flags are not set.
Signed-off-by: Denis Carikli denis@eukrea.com --- ChangeLog v12->v13: - This patch doesn't need the DRM_MODE_FLAG_POL_*_PRESERVE flags anymore. - code cleanup to improve readability: - ENABLE_POL_PRESERVE is now gone - Less modifications in ipu_di_init_sync_panel - more readable modifications in int ipu_crtc_mode_set ChangeLog v11->v12: - Rebased: It now uses the following new flags defines names: CLK_POL, ENABLE_POL - The inversions in ipuv3-crtc.c are now fixed. - ipuv3-crtc.c was still using mode->private_flags from the previous versions of this patchset, that's now fixed.
ChangeLog v10->v11: - This patch was splitted-out and adapted from: "Prepare imx-drm for extra display-timings retrival." - The display-timings dt specific part was removed. - The flags names were changed to use the DRM ones from: "drm: drm_display_mode: add signal polarity flags" --- drivers/staging/imx-drm/ipu-v3/imx-ipu-v3.h | 4 ++-- drivers/staging/imx-drm/ipu-v3/ipu-di.c | 2 ++ drivers/staging/imx-drm/ipuv3-crtc.c | 18 ++++++++++++++++-- 3 files changed, 20 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/imx-drm/ipu-v3/imx-ipu-v3.h b/drivers/staging/imx-drm/ipu-v3/imx-ipu-v3.h index 015e3bf..94b0d8e 100644 --- a/drivers/staging/imx-drm/ipu-v3/imx-ipu-v3.h +++ b/drivers/staging/imx-drm/ipu-v3/imx-ipu-v3.h @@ -43,10 +43,10 @@ struct ipu_di_signal_cfg { unsigned clksel_en:1; unsigned clkidle_en:1; unsigned data_pol:1; /* true = inverted */ - unsigned clk_pol:1; - unsigned enable_pol:1; unsigned Hsync_pol:1; /* true = active high */ unsigned Vsync_pol:1; + u8 clk_pol; + u8 enable_pol;
u16 width; u16 height; diff --git a/drivers/staging/imx-drm/ipu-v3/ipu-di.c b/drivers/staging/imx-drm/ipu-v3/ipu-di.c index 0ce3f52..faf08e2 100644 --- a/drivers/staging/imx-drm/ipu-v3/ipu-di.c +++ b/drivers/staging/imx-drm/ipu-v3/ipu-di.c @@ -597,6 +597,8 @@ int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
if (sig->clk_pol == CLK_POL_POSEDGE) di_gen |= DI_GEN_POLARITY_DISP_CLK; + else if (sig->clk_pol == CLK_POL_NEGEDGE) + di_gen &= ~DI_GEN_POLARITY_DISP_CLK;
ipu_di_write(di, di_gen, DI_GENERAL);
diff --git a/drivers/staging/imx-drm/ipuv3-crtc.c b/drivers/staging/imx-drm/ipuv3-crtc.c index ba9eea3..10b46b5 100644 --- a/drivers/staging/imx-drm/ipuv3-crtc.c +++ b/drivers/staging/imx-drm/ipuv3-crtc.c @@ -165,8 +165,22 @@ static int ipu_crtc_mode_set(struct drm_crtc *crtc, if (mode->flags & DRM_MODE_FLAG_PVSYNC) sig_cfg.Vsync_pol = 1;
- sig_cfg.enable_pol = ENABLE_POL_HIGH; - sig_cfg.clk_pol = CLK_POL_NEGEDGE; + if (mode->pol_flags & DRM_MODE_FLAG_POL_PIXDATA_POSEDGE) + sig_cfg.clk_pol = CLK_POL_POSEDGE; + else if (mode->pol_flags & DRM_MODE_FLAG_POL_PIXDATA_NEGEDGE) + sig_cfg.clk_pol = CLK_POL_NEGEDGE; + else + /* If no PIXDATA flags were set, keep the old behaviour */ + sig_cfg.clk_pol = CLK_POL_NEGEDGE; + + if (mode->pol_flags & DRM_MODE_FLAG_POL_DE_HIGH) + sig_cfg.enable_pol = ENABLE_POL_HIGH; + else if (mode->pol_flags & DRM_MODE_FLAG_POL_DE_LOW) + sig_cfg.enable_pol = ENABLE_POL_LOW; + else + /* If no DE flags were set, keep the old behaviour */ + sig_cfg.enable_pol = ENABLE_POL_HIGH; + sig_cfg.width = mode->hdisplay; sig_cfg.height = mode->vdisplay; sig_cfg.pixel_fmt = out_pixel_fmt;