From: YoungJun Cho yj44.cho@samsung.com
This patch fixes G2D core malfunctioning issue once g2d dma is started. Without 'DMA_HOLD_CMD_REG' register setting, there is only one interrupt after the execution to all command lists have been completed. And that induces watchdog. So this patch sets 'LIST_HOLD' command to the register so that command execution interrupt can be occured whenever each command list execution is finished.
Changelog v2: - Consider for interrupt setup to each command list and all command lists And correct typo.
Signed-off-by: YoungJun Cho yj44.cho@samsung.com Signed-off-by: Inki Dae inki.dae@samsung.com Signed-off-by: Kyungmin Park kyungmin.park@samsung.com --- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 20 +++++++++++++++----- 1 files changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index 095520f..1ff1144 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -82,7 +82,7 @@ #define G2D_DMA_LIST_DONE_COUNT_OFFSET 17
/* G2D_DMA_HOLD_CMD */ -#define G2D_USET_HOLD (1 << 2) +#define G2D_USER_HOLD (1 << 2) #define G2D_LIST_HOLD (1 << 1) #define G2D_BITBLT_HOLD (1 << 0)
@@ -592,10 +592,6 @@ static void g2d_dma_start(struct g2d_data *g2d, pm_runtime_get_sync(g2d->dev); clk_enable(g2d->gate_clk);
- /* interrupt enable */ - writel_relaxed(G2D_INTEN_ACF | G2D_INTEN_UCF | G2D_INTEN_GCF, - g2d->regs + G2D_INTEN); - writel_relaxed(node->dma_addr, g2d->regs + G2D_DMA_SFR_BASE_ADDR); writel_relaxed(G2D_DMA_START, g2d->regs + G2D_DMA_COMMAND); } @@ -863,9 +859,23 @@ int exynos_g2d_set_cmdlist_ioctl(struct drm_device *drm_dev, void *data, cmdlist->data[cmdlist->last++] = G2D_SRC_BASE_ADDR; cmdlist->data[cmdlist->last++] = 0;
+ /* + * 'LIST_HOLD' command should be set to the DMA_HOLD_CMD_REG + * and GCF bit should be set to INTEN register if user wants + * G2D interrupt event once current command list execution is + * finished. + * Otherwise only ACF bit should be set to INTEN register so + * that one interrupt is occured after all command lists + * have been completed. + */ if (node->event) { + cmdlist->data[cmdlist->last++] = G2D_INTEN; + cmdlist->data[cmdlist->last++] = G2D_INTEN_ACF | G2D_INTEN_GCF; cmdlist->data[cmdlist->last++] = G2D_DMA_HOLD_CMD; cmdlist->data[cmdlist->last++] = G2D_LIST_HOLD; + } else { + cmdlist->data[cmdlist->last++] = G2D_INTEN; + cmdlist->data[cmdlist->last++] = G2D_INTEN_ACF; }
/* Check size of cmdlist: last 2 is about G2D_BITBLT_START */