Platform data support has been removed from the DU driver, drop DU support from the legacy Marzen board file. The multiplatform DT-based Marzen support should be used instead.
Signed-off-by: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com --- arch/arm/mach-shmobile/board-marzen.c | 58 ----------------------------------- 1 file changed, 58 deletions(-)
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 994dc7d86ae2..598f704f76ae 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -27,7 +27,6 @@ #include <linux/pinctrl/machine.h> #include <linux/platform_data/camera-rcar.h> #include <linux/platform_data/gpio-rcar.h> -#include <linux/platform_data/rcar-du.h> #include <linux/platform_data/usb-rcar-phy.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> @@ -171,62 +170,6 @@ static struct platform_device hspi_device = { .num_resources = ARRAY_SIZE(hspi_resources), };
-/* - * DU - * - * The panel only specifies the [hv]display and [hv]total values. The position - * and width of the sync pulses don't matter, they're copied from VESA timings. - */ -static struct rcar_du_encoder_data du_encoders[] = { - { - .type = RCAR_DU_ENCODER_VGA, - .output = RCAR_DU_OUTPUT_DPAD0, - }, { - .type = RCAR_DU_ENCODER_LVDS, - .output = RCAR_DU_OUTPUT_DPAD1, - .connector.lvds.panel = { - .width_mm = 210, - .height_mm = 158, - .mode = { - .pixelclock = 65000000, - .hactive = 1024, - .hfront_porch = 20, - .hback_porch = 160, - .hsync_len = 136, - .vactive = 768, - .vfront_porch = 3, - .vback_porch = 29, - .vsync_len = 6, - }, - }, - }, -}; - -static const struct rcar_du_platform_data du_pdata __initconst = { - .encoders = du_encoders, - .num_encoders = ARRAY_SIZE(du_encoders), -}; - -static const struct resource du_resources[] __initconst = { - DEFINE_RES_MEM(0xfff80000, 0x40000), - DEFINE_RES_IRQ(gic_iid(0x3f)), -}; - -static void __init marzen_add_du_device(void) -{ - struct platform_device_info info = { - .name = "rcar-du-r8a7779", - .id = -1, - .res = du_resources, - .num_res = ARRAY_SIZE(du_resources), - .data = &du_pdata, - .size_data = sizeof(du_pdata), - .dma_mask = DMA_BIT_MASK(32), - }; - - platform_device_register_full(&info); -} - /* LEDS */ static struct gpio_led marzen_leds[] = { { @@ -385,7 +328,6 @@ static void __init marzen_init(void) platform_device_register_full(&vin1_info); platform_device_register_full(&vin3_info); platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices)); - marzen_add_du_device(); }
static const char *marzen_boards_compat_dt[] __initdata = {