This driver creates DRM encoder and connector for ZynqMP DisplayPort.
Signed-off-by: Hyun Kwon hyun.kwon@xilinx.com --- v2 - Change the SPDX identifier format - Split drm properties into a separate patch --- --- drivers/gpu/drm/xlnx/zynqmp_dp.c | 1738 ++++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/xlnx/zynqmp_dp.h | 37 + 2 files changed, 1775 insertions(+) create mode 100644 drivers/gpu/drm/xlnx/zynqmp_dp.c create mode 100644 drivers/gpu/drm/xlnx/zynqmp_dp.h
diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c b/drivers/gpu/drm/xlnx/zynqmp_dp.c new file mode 100644 index 0000000..9c9f4df --- /dev/null +++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c @@ -0,0 +1,1738 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ZynqMP DisplayPort Driver + * + * Copyright (C) 2017 - 2018 Xilinx, Inc. + * + * Author: Hyun Woo Kwon hyun.kwon@xilinx.com + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <drm/drmP.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_connector.h> +#include <drm/drm_crtc.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_dp_helper.h> +#include <drm/drm_of.h> + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/uaccess.h> + +#include "zynqmp_disp.h" +#include "zynqmp_dpsub.h" + +static uint zynqmp_dp_aux_timeout_ms = 50; +module_param_named(aux_timeout_ms, zynqmp_dp_aux_timeout_ms, uint, 0444); +MODULE_PARM_DESC(aux_timeout_ms, "DP aux timeout value in msec (default: 50)"); + +/* + * Some sink requires a delay after power on request + */ +static uint zynqmp_dp_power_on_delay_ms = 4; +module_param_named(power_on_delay_ms, zynqmp_dp_power_on_delay_ms, uint, 0444); +MODULE_PARM_DESC(aux_timeout_ms, "DP power on delay in msec (default: 4)"); + +/* Link configuration registers */ +#define ZYNQMP_DP_TX_LINK_BW_SET 0x0 +#define ZYNQMP_DP_TX_LANE_CNT_SET 0x4 +#define ZYNQMP_DP_TX_ENHANCED_FRAME_EN 0x8 +#define ZYNQMP_DP_TX_TRAINING_PATTERN_SET 0xc +#define ZYNQMP_DP_TX_SCRAMBLING_DISABLE 0x14 +#define ZYNQMP_DP_TX_DOWNSPREAD_CTL 0x18 +#define ZYNQMP_DP_TX_SW_RESET 0x1c +#define ZYNQMP_DP_TX_SW_RESET_STREAM1 BIT(0) +#define ZYNQMP_DP_TX_SW_RESET_STREAM2 BIT(1) +#define ZYNQMP_DP_TX_SW_RESET_STREAM3 BIT(2) +#define ZYNQMP_DP_TX_SW_RESET_STREAM4 BIT(3) +#define ZYNQMP_DP_TX_SW_RESET_AUX BIT(7) +#define ZYNQMP_DP_TX_SW_RESET_ALL (ZYNQMP_DP_TX_SW_RESET_STREAM1 | \ + ZYNQMP_DP_TX_SW_RESET_STREAM2 | \ + ZYNQMP_DP_TX_SW_RESET_STREAM3 | \ + ZYNQMP_DP_TX_SW_RESET_STREAM4 | \ + ZYNQMP_DP_TX_SW_RESET_AUX) + +/* Core enable registers */ +#define ZYNQMP_DP_TX_ENABLE 0x80 +#define ZYNQMP_DP_TX_ENABLE_MAIN_STREAM 0x84 +#define ZYNQMP_DP_TX_FORCE_SCRAMBLER_RESET 0xc0 +#define ZYNQMP_DP_TX_VERSION 0xf8 +#define ZYNQMP_DP_TX_VERSION_MAJOR_MASK GENMASK(31, 24) +#define ZYNQMP_DP_TX_VERSION_MAJOR_SHIFT 24 +#define ZYNQMP_DP_TX_VERSION_MINOR_MASK GENMASK(23, 16) +#define ZYNQMP_DP_TX_VERSION_MINOR_SHIFT 16 +#define ZYNQMP_DP_TX_VERSION_REVISION_MASK GENMASK(15, 12) +#define ZYNQMP_DP_TX_VERSION_REVISION_SHIFT 12 +#define ZYNQMP_DP_TX_VERSION_PATCH_MASK GENMASK(11, 8) +#define ZYNQMP_DP_TX_VERSION_PATCH_SHIFT 8 +#define ZYNQMP_DP_TX_VERSION_INTERNAL_MASK GENMASK(7, 0) +#define ZYNQMP_DP_TX_VERSION_INTERNAL_SHIFT 0 + +/* Core ID registers */ +#define ZYNQMP_DP_TX_CORE_ID 0xfc +#define ZYNQMP_DP_TX_CORE_ID_MAJOR_MASK GENMASK(31, 24) +#define ZYNQMP_DP_TX_CORE_ID_MAJOR_SHIFT 24 +#define ZYNQMP_DP_TX_CORE_ID_MINOR_MASK GENMASK(23, 16) +#define ZYNQMP_DP_TX_CORE_ID_MINOR_SHIFT 16 +#define ZYNQMP_DP_TX_CORE_ID_REVISION_MASK GENMASK(15, 8) +#define ZYNQMP_DP_TX_CORE_ID_REVISION_SHIFT 8 +#define ZYNQMP_DP_TX_CORE_ID_DIRECTION GENMASK(1) + +/* AUX channel interface registers */ +#define ZYNQMP_DP_TX_AUX_COMMAND 0x100 +#define ZYNQMP_DP_TX_AUX_COMMAND_CMD_SHIFT 8 +#define ZYNQMP_DP_TX_AUX_COMMAND_ADDRESS_ONLY BIT(12) +#define ZYNQMP_DP_TX_AUX_COMMAND_BYTES_SHIFT 0 +#define ZYNQMP_DP_TX_AUX_WRITE_FIFO 0x104 +#define ZYNQMP_DP_TX_AUX_ADDRESS 0x108 +#define ZYNQMP_DP_TX_CLK_DIVIDER 0x10c +#define ZYNQMP_DP_TX_CLK_DIVIDER_MHZ 1000000 +#define ZYNQMP_DP_TX_CLK_DIVIDER_AUX_FILTER_SHIFT 8 +#define ZYNQMP_DP_TX_INTR_SIGNAL_STATE 0x130 +#define ZYNQMP_DP_TX_INTR_SIGNAL_STATE_HPD BIT(0) +#define ZYNQMP_DP_TX_INTR_SIGNAL_STATE_REQUEST BIT(1) +#define ZYNQMP_DP_TX_INTR_SIGNAL_STATE_REPLY BIT(2) +#define ZYNQMP_DP_TX_INTR_SIGNAL_STATE_REPLY_TIMEOUT BIT(3) +#define ZYNQMP_DP_TX_AUX_REPLY_DATA 0x134 +#define ZYNQMP_DP_TX_AUX_REPLY_CODE 0x138 +#define ZYNQMP_DP_TX_AUX_REPLY_CODE_AUX_ACK (0) +#define ZYNQMP_DP_TX_AUX_REPLY_CODE_AUX_NACK BIT(0) +#define ZYNQMP_DP_TX_AUX_REPLY_CODE_AUX_DEFER BIT(1) +#define ZYNQMP_DP_TX_AUX_REPLY_CODE_I2C_ACK (0) +#define ZYNQMP_DP_TX_AUX_REPLY_CODE_I2C_NACK BIT(2) +#define ZYNQMP_DP_TX_AUX_REPLY_CODE_I2C_DEFER BIT(3) +#define ZYNQMP_DP_TX_AUX_REPLY_CNT 0x13c +#define ZYNQMP_DP_TX_AUX_REPLY_CNT_MASK 0xff +#define ZYNQMP_DP_TX_INTR_STATUS 0x140 +#define ZYNQMP_DP_TX_INTR_MASK 0x144 +#define ZYNQMP_DP_TX_INTR_HPD_IRQ BIT(0) +#define ZYNQMP_DP_TX_INTR_HPD_EVENT BIT(1) +#define ZYNQMP_DP_TX_INTR_REPLY_RECV BIT(2) +#define ZYNQMP_DP_TX_INTR_REPLY_TIMEOUT BIT(3) +#define ZYNQMP_DP_TX_INTR_HPD_PULSE BIT(4) +#define ZYNQMP_DP_TX_INTR_EXT_PKT_TXD BIT(5) +#define ZYNQMP_DP_TX_INTR_LIV_ABUF_UNDRFLW BIT(12) +#define ZYNQMP_DP_TX_INTR_VBLANK_START BIT(13) +#define ZYNQMP_DP_TX_INTR_PIXEL0_MATCH BIT(14) +#define ZYNQMP_DP_TX_INTR_PIXEL1_MATCH BIT(15) +#define ZYNQMP_DP_TX_INTR_CHBUF_UNDERFLW_MASK 0x3f0000 +#define ZYNQMP_DP_TX_INTR_CHBUF_OVERFLW_MASK 0xfc00000 +#define ZYNQMP_DP_TX_INTR_CUST_TS_2 BIT(28) +#define ZYNQMP_DP_TX_INTR_CUST_TS BIT(29) +#define ZYNQMP_DP_TX_INTR_EXT_VSYNC_TS BIT(30) +#define ZYNQMP_DP_TX_INTR_VSYNC_TS BIT(31) +#define ZYNQMP_DP_TX_INTR_ALL (ZYNQMP_DP_TX_INTR_HPD_IRQ | \ + ZYNQMP_DP_TX_INTR_HPD_EVENT | \ + ZYNQMP_DP_TX_INTR_REPLY_RECV | \ + ZYNQMP_DP_TX_INTR_REPLY_TIMEOUT | \ + ZYNQMP_DP_TX_INTR_HPD_PULSE | \ + ZYNQMP_DP_TX_INTR_EXT_PKT_TXD | \ + ZYNQMP_DP_TX_INTR_LIV_ABUF_UNDRFLW | \ + ZYNQMP_DP_TX_INTR_CHBUF_UNDERFLW_MASK | \ + ZYNQMP_DP_TX_INTR_CHBUF_OVERFLW_MASK) +#define ZYNQMP_DP_TX_NO_INTR_ALL (ZYNQMP_DP_TX_INTR_PIXEL0_MATCH | \ + ZYNQMP_DP_TX_INTR_PIXEL1_MATCH | \ + ZYNQMP_DP_TX_INTR_CUST_TS_2 | \ + ZYNQMP_DP_TX_INTR_CUST_TS | \ + ZYNQMP_DP_TX_INTR_EXT_VSYNC_TS | \ + ZYNQMP_DP_TX_INTR_VSYNC_TS) +#define ZYNQMP_DP_TX_REPLY_DATA_CNT 0x148 +#define ZYNQMP_DP_SUB_TX_INTR_STATUS 0x3a0 +#define ZYNQMP_DP_SUB_TX_INTR_MASK 0x3a4 +#define ZYNQMP_DP_SUB_TX_INTR_EN 0x3a8 +#define ZYNQMP_DP_SUB_TX_INTR_DS 0x3ac + +/* Main stream attribute registers */ +#define ZYNQMP_DP_TX_MAIN_STREAM_HTOTAL 0x180 +#define ZYNQMP_DP_TX_MAIN_STREAM_VTOTAL 0x184 +#define ZYNQMP_DP_TX_MAIN_STREAM_POLARITY 0x188 +#define ZYNQMP_DP_TX_MAIN_STREAM_POLARITY_HSYNC_SHIFT 0 +#define ZYNQMP_DP_TX_MAIN_STREAM_POLARITY_VSYNC_SHIFT 1 +#define ZYNQMP_DP_TX_MAIN_STREAM_HSWIDTH 0x18c +#define ZYNQMP_DP_TX_MAIN_STREAM_VSWIDTH 0x190 +#define ZYNQMP_DP_TX_MAIN_STREAM_HRES 0x194 +#define ZYNQMP_DP_TX_MAIN_STREAM_VRES 0x198 +#define ZYNQMP_DP_TX_MAIN_STREAM_HSTART 0x19c +#define ZYNQMP_DP_TX_MAIN_STREAM_VSTART 0x1a0 +#define ZYNQMP_DP_TX_MAIN_STREAM_MISC0 0x1a4 +#define ZYNQMP_DP_TX_MAIN_STREAM_MISC0_SYNC BIT(0) +#define ZYNQMP_DP_TX_MAIN_STREAM_MISC0_FORMAT_SHIFT 1 +#define ZYNQMP_DP_TX_MAIN_STREAM_MISC0_DYNAMIC_RANGE BIT(3) +#define ZYNQMP_DP_TX_MAIN_STREAM_MISC0_YCBCR_COLRIMETRY BIT(4) +#define ZYNQMP_DP_TX_MAIN_STREAM_MISC0_BPC_SHIFT 5 +#define ZYNQMP_DP_TX_MAIN_STREAM_MISC1 0x1a8 +#define ZYNQMP_DP_TX_MAIN_STREAM_MISC0_INTERLACED_VERT BIT(0) +#define ZYNQMP_DP_TX_MAIN_STREAM_MISC0_STEREO_VID_SHIFT 1 +#define ZYNQMP_DP_TX_M_VID 0x1ac +#define ZYNQMP_DP_TX_TRANSFER_UNIT_SIZE 0x1b0 +#define ZYNQMP_DP_TX_DEF_TRANSFER_UNIT_SIZE 64 +#define ZYNQMP_DP_TX_N_VID 0x1b4 +#define ZYNQMP_DP_TX_USER_PIXEL_WIDTH 0x1b8 +#define ZYNQMP_DP_TX_USER_DATA_CNT_PER_LANE 0x1bc +#define ZYNQMP_DP_TX_MIN_BYTES_PER_TU 0x1c4 +#define ZYNQMP_DP_TX_FRAC_BYTES_PER_TU 0x1c8 +#define ZYNQMP_DP_TX_INIT_WAIT 0x1cc + +/* PHY configuration and status registers */ +#define ZYNQMP_DP_TX_PHY_CONFIG 0x200 +#define ZYNQMP_DP_TX_PHY_CONFIG_PHY_RESET BIT(0) +#define ZYNQMP_DP_TX_PHY_CONFIG_GTTX_RESET BIT(1) +#define ZYNQMP_DP_TX_PHY_CONFIG_PHY_PMA_RESET BIT(8) +#define ZYNQMP_DP_TX_PHY_CONFIG_PHY_PCS_RESET BIT(9) +#define ZYNQMP_DP_TX_PHY_CONFIG_ALL_RESET (ZYNQMP_DP_TX_PHY_CONFIG_PHY_RESET | \ + ZYNQMP_DP_TX_PHY_CONFIG_GTTX_RESET | \ + ZYNQMP_DP_TX_PHY_CONFIG_PHY_PMA_RESET | \ + ZYNQMP_DP_TX_PHY_CONFIG_PHY_PCS_RESET) +#define ZYNQMP_DP_TX_PHY_PREEMPHASIS_LANE_0 0x210 +#define ZYNQMP_DP_TX_PHY_PREEMPHASIS_LANE_1 0x214 +#define ZYNQMP_DP_TX_PHY_PREEMPHASIS_LANE_2 0x218 +#define ZYNQMP_DP_TX_PHY_PREEMPHASIS_LANE_3 0x21c +#define ZYNQMP_DP_TX_PHY_VOLTAGE_DIFF_LANE_0 0x220 +#define ZYNQMP_DP_TX_PHY_VOLTAGE_DIFF_LANE_1 0x224 +#define ZYNQMP_DP_TX_PHY_VOLTAGE_DIFF_LANE_2 0x228 +#define ZYNQMP_DP_TX_PHY_VOLTAGE_DIFF_LANE_3 0x22c +#define ZYNQMP_DP_TX_PHY_CLOCK_FEEDBACK_SETTING 0x234 +#define ZYNQMP_DP_TX_PHY_CLOCK_FEEDBACK_SETTING_162 0x1 +#define ZYNQMP_DP_TX_PHY_CLOCK_FEEDBACK_SETTING_270 0x3 +#define ZYNQMP_DP_TX_PHY_CLOCK_FEEDBACK_SETTING_540 0x5 +#define ZYNQMP_DP_TX_PHY_POWER_DOWN 0x238 +#define ZYNQMP_DP_TX_PHY_POWER_DOWN_LANE_0 BIT(0) +#define ZYNQMP_DP_TX_PHY_POWER_DOWN_LANE_1 BIT(1) +#define ZYNQMP_DP_TX_PHY_POWER_DOWN_LANE_2 BIT(2) +#define ZYNQMP_DP_TX_PHY_POWER_DOWN_LANE_3 BIT(3) +#define ZYNQMP_DP_TX_PHY_POWER_DOWN_ALL 0xf +#define ZYNQMP_DP_TX_PHY_PRECURSOR_LANE_0 0x23c +#define ZYNQMP_DP_TX_PHY_PRECURSOR_LANE_1 0x240 +#define ZYNQMP_DP_TX_PHY_PRECURSOR_LANE_2 0x244 +#define ZYNQMP_DP_TX_PHY_PRECURSOR_LANE_3 0x248 +#define ZYNQMP_DP_TX_PHY_POSTCURSOR_LANE_0 0x24c +#define ZYNQMP_DP_TX_PHY_POSTCURSOR_LANE_1 0x250 +#define ZYNQMP_DP_TX_PHY_POSTCURSOR_LANE_2 0x254 +#define ZYNQMP_DP_TX_PHY_POSTCURSOR_LANE_3 0x258 +#define ZYNQMP_DP_SUB_TX_PHY_PRECURSOR_LANE_0 0x24c +#define ZYNQMP_DP_SUB_TX_PHY_PRECURSOR_LANE_1 0x250 +#define ZYNQMP_DP_TX_PHY_STATUS 0x280 +#define ZYNQMP_DP_TX_PHY_STATUS_PLL_LOCKED_SHIFT 4 +#define ZYNQMP_DP_TX_PHY_STATUS_FPGA_PLL_LOCKED BIT(6) + +/* Audio registers */ +#define ZYNQMP_DP_TX_AUDIO_CONTROL 0x300 +#define ZYNQMP_DP_TX_AUDIO_CHANNELS 0x304 +#define ZYNQMP_DP_TX_AUDIO_INFO_DATA 0x308 +#define ZYNQMP_DP_TX_AUDIO_M_AUD 0x328 +#define ZYNQMP_DP_TX_AUDIO_N_AUD 0x32c +#define ZYNQMP_DP_TX_AUDIO_EXT_DATA 0x330 + +#define ZYNQMP_DP_MISC0_RGB (0) +#define ZYNQMP_DP_MISC0_YCRCB_422 (5 << 1) +#define ZYNQMP_DP_MISC0_YCRCB_444 (6 << 1) +#define ZYNQMP_DP_MISC0_FORMAT_MASK 0xe +#define ZYNQMP_DP_MISC0_BPC_6 (0 << 5) +#define ZYNQMP_DP_MISC0_BPC_8 (1 << 5) +#define ZYNQMP_DP_MISC0_BPC_10 (2 << 5) +#define ZYNQMP_DP_MISC0_BPC_12 (3 << 5) +#define ZYNQMP_DP_MISC0_BPC_16 (4 << 5) +#define ZYNQMP_DP_MISC0_BPC_MASK 0xe0 +#define ZYNQMP_DP_MISC1_Y_ONLY (1 << 7) + +#define ZYNQMP_DP_MAX_LANES 2 +#define ZYNQMP_MAX_FREQ 3000000 + +#define DP_REDUCED_BIT_RATE 162000 +#define DP_HIGH_BIT_RATE 270000 +#define DP_HIGH_BIT_RATE2 540000 +#define DP_MAX_TRAINING_TRIES 5 +#define DP_V1_2 0x12 + +/** + * struct zynqmp_dp_link_config - Common link config between source and sink + * @max_rate: maximum link rate + * @max_lanes: maximum number of lanes + */ +struct zynqmp_dp_link_config { + int max_rate; + u8 max_lanes; +}; + +/** + * struct zynqmp_dp_mode - Configured mode of DisplayPort + * @bw_code: code for bandwidth(link rate) + * @lane_cnt: number of lanes + * @pclock: pixel clock frequency of current mode + * @fmt: format identifier string + */ +struct zynqmp_dp_mode { + u8 bw_code; + u8 lane_cnt; + int pclock; + const char *fmt; +}; + +/** + * struct zynqmp_dp_config - Configuration of DisplayPort from DTS + * @misc0: misc0 configuration (per DP v1.2 spec) + * @misc1: misc1 configuration (per DP v1.2 spec) + * @bpp: bits per pixel + * @bpc: bits per component + * @num_colors: number of color components + */ +struct zynqmp_dp_config { + u8 misc0; + u8 misc1; + u8 bpp; + u8 bpc; + u8 num_colors; +}; + +/** + * struct zynqmp_dp - Xilinx DisplayPort core + * @encoder: the drm encoder structure + * @connector: the drm connector structure + * @dev: device structure + * @dpsub: Display subsystem + * @drm: DRM core + * @iomem: device I/O memory for register access + * @irq: irq + * @config: IP core configuration from DTS + * @aux: aux channel + * @phy: PHY handles for DP lanes + * @num_lanes: number of enabled phy lanes + * @hpd_work: hot plug detection worker + * @status: connection status + * @enabled: flag to indicate if the device is enabled + * @dpms: current dpms state + * @dpcd: DP configuration data from currently connected sink device + * @link_config: common link configuration between IP core and sink device + * @mode: current mode between IP core and sink device + * @train_set: set of training data + */ +struct zynqmp_dp { + struct drm_encoder encoder; + struct drm_connector connector; + struct device *dev; + struct zynqmp_dpsub *dpsub; + struct drm_device *drm; + void __iomem *iomem; + int irq; + + struct zynqmp_dp_config config; + struct drm_dp_aux aux; + struct phy *phy[ZYNQMP_DP_MAX_LANES]; + u8 num_lanes; + struct delayed_work hpd_work; + enum drm_connector_status status; + bool enabled; + + int dpms; + u8 dpcd[DP_RECEIVER_CAP_SIZE]; + struct zynqmp_dp_link_config link_config; + struct zynqmp_dp_mode mode; + u8 train_set[ZYNQMP_DP_MAX_LANES]; +}; + +static inline struct zynqmp_dp *encoder_to_dp(struct drm_encoder *encoder) +{ + return container_of(encoder, struct zynqmp_dp, encoder); +} + +static inline struct zynqmp_dp *connector_to_dp(struct drm_connector *connector) +{ + return container_of(connector, struct zynqmp_dp, connector); +} + +static void zynqmp_dp_write(void __iomem *base, int offset, u32 val) +{ + writel(val, base + offset); +} + +static u32 zynqmp_dp_read(void __iomem *base, int offset) +{ + return readl(base + offset); +} + +static void zynqmp_dp_clr(void __iomem *base, int offset, u32 clr) +{ + zynqmp_dp_write(base, offset, zynqmp_dp_read(base, offset) & ~clr); +} + +static void zynqmp_dp_set(void __iomem *base, int offset, u32 set) +{ + zynqmp_dp_write(base, offset, zynqmp_dp_read(base, offset) | set); +} + +/* + * Internal functions: used by zynqmp_disp.c + */ + +/** + * zynqmp_dp_update_bpp - Update the current bpp config + * @dp: DisplayPort IP core structure + * + * Update the current bpp based on the color format: bpc & num_colors. + * Any function that changes bpc or num_colors should call this + * to keep the bpp value in sync. + */ +static void zynqmp_dp_update_bpp(struct zynqmp_dp *dp) +{ + struct zynqmp_dp_config *config = &dp->config; + + config->bpp = dp->config.bpc * dp->config.num_colors; +} + +/** + * zynqmp_dp_set_color - Set the color + * @dp: DisplayPort IP core structure + * @color: color string, from zynqmp_disp_color_enum + * + * Update misc register values based on @color string. + * + * Return: 0 on success, or -EINVAL. + */ +int zynqmp_dp_set_color(struct zynqmp_dp *dp, const char *color) +{ + struct zynqmp_dp_config *config = &dp->config; + + config->misc0 &= ~ZYNQMP_DP_MISC0_FORMAT_MASK; + config->misc1 &= ~ZYNQMP_DP_MISC1_Y_ONLY; + if (strcmp(color, "rgb") == 0) { + config->misc0 |= ZYNQMP_DP_MISC0_RGB; + config->num_colors = 3; + } else if (strcmp(color, "ycrcb422") == 0) { + config->misc0 |= ZYNQMP_DP_MISC0_YCRCB_422; + config->num_colors = 2; + } else if (strcmp(color, "ycrcb444") == 0) { + config->misc0 |= ZYNQMP_DP_MISC0_YCRCB_444; + config->num_colors = 3; + } else if (strcmp(color, "yonly") == 0) { + config->misc1 |= ZYNQMP_DP_MISC1_Y_ONLY; + config->num_colors = 1; + } else { + dev_err(dp->dev, "Invalid colormetry in DT\n"); + return -EINVAL; + } + zynqmp_dp_update_bpp(dp); + + return 0; +} + +/** + * zynqmp_dp_enable_vblank - Enable vblank + * @dp: DisplayPort IP core structure + * + * Enable vblank interrupt + */ +void zynqmp_dp_enable_vblank(struct zynqmp_dp *dp) +{ + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_SUB_TX_INTR_EN, + ZYNQMP_DP_TX_INTR_VBLANK_START); +} + +/** + * zynqmp_dp_disable_vblank - Disable vblank + * @dp: DisplayPort IP core structure + * + * Disable vblank interrupt + */ +void zynqmp_dp_disable_vblank(struct zynqmp_dp *dp) +{ + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_SUB_TX_INTR_DS, + ZYNQMP_DP_TX_INTR_VBLANK_START); +} + +/* + * DP PHY functions + */ + +/** + * zynqmp_dp_init_phy - Initialize the phy + * @dp: DisplayPort IP core structure + * + * Initialize the phy. + * + * Return: 0 if the phy instances are initialized correctly, or the error code + * returned from the callee functions. + */ +static int zynqmp_dp_init_phy(struct zynqmp_dp *dp) +{ + unsigned int i; + int ret; + + for (i = 0; i < ZYNQMP_DP_MAX_LANES; i++) { + ret = phy_init(dp->phy[i]); + if (ret) { + dev_err(dp->dev, "failed to init phy lane %d\n", i); + return ret; + } + } + + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_SUB_TX_INTR_DS, + ZYNQMP_DP_TX_INTR_ALL); + zynqmp_dp_clr(dp->iomem, ZYNQMP_DP_TX_PHY_CONFIG, + ZYNQMP_DP_TX_PHY_CONFIG_ALL_RESET); + + return 0; +} + +/** + * zynqmp_dp_exit_phy - Exit the phy + * @dp: DisplayPort IP core structure + * + * Exit the phy. + */ +static void zynqmp_dp_exit_phy(struct zynqmp_dp *dp) +{ + unsigned int i; + int ret; + + for (i = 0; i < ZYNQMP_DP_MAX_LANES; i++) { + ret = phy_exit(dp->phy[i]); + if (ret) + dev_err(dp->dev, "failed to exit phy(%d) %d\n", i, ret); + } +} + +/** + * zynqmp_dp_phy_ready - Check if PHY is ready + * @dp: DisplayPort IP core structure + * + * Check if PHY is ready. If PHY is not ready, wait 1ms to check for 100 times. + * This amount of delay was suggested by IP designer. + * + * Return: 0 if PHY is ready, or -ENODEV if PHY is not ready. + */ +static int zynqmp_dp_phy_ready(struct zynqmp_dp *dp) +{ + u32 i, reg, ready; + + ready = (1 << ZYNQMP_DP_MAX_LANES) - 1; + + /* Wait for 100 * 1ms. This should be enough time for PHY to be ready */ + for (i = 0; ; i++) { + reg = zynqmp_dp_read(dp->iomem, ZYNQMP_DP_TX_PHY_STATUS); + if ((reg & ready) == ready) + return 0; + + if (i == 100) { + dev_err(dp->dev, "PHY isn't ready\n"); + return -ENODEV; + } + + usleep_range(1000, 1100); + } + + return 0; +} + +/* + * DP functions + */ + +/** + * zynqmp_dp_max_rate - Calculate and return available max pixel clock + * @link_rate: link rate (Kilo-bytes / sec) + * @lane_num: number of lanes + * @bpp: bits per pixel + * + * Return: max pixel clock (KHz) supported by current link config. + */ +static inline int zynqmp_dp_max_rate(int link_rate, u8 lane_num, u8 bpp) +{ + return link_rate * lane_num * 8 / bpp; +} + +/** + * zynqmp_dp_mode_configure - Configure the link values + * @dp: DisplayPort IP core structure + * @pclock: pixel clock for requested display mode + * @current_bw: current link rate + * + * Find the link configuration values, rate and lane count for requested pixel + * clock @pclock. The @pclock is stored in the mode to be used in other + * functions later. The returned rate is downshifted from the current rate + * @current_bw. + * + * Return: Current link rate code, or -EINVAL. + */ +static int zynqmp_dp_mode_configure(struct zynqmp_dp *dp, int pclock, + u8 current_bw) +{ + int max_rate = dp->link_config.max_rate; + u8 bws[3] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7, DP_LINK_BW_5_4 }; + u8 max_lanes = dp->link_config.max_lanes; + u8 max_link_rate_code = drm_dp_link_rate_to_bw_code(max_rate); + u8 bpp = dp->config.bpp; + u8 lane_cnt; + s8 i; + + if (current_bw == DP_LINK_BW_1_62) { + dev_err(dp->dev, "can't downshift. already lowest link rate\n"); + return -EINVAL; + } + + for (i = ARRAY_SIZE(bws) - 1; i >= 0; i--) { + if (current_bw && bws[i] >= current_bw) + continue; + + if (bws[i] <= max_link_rate_code) + break; + } + + for (lane_cnt = 1; lane_cnt <= max_lanes; lane_cnt <<= 1) { + int bw; + u32 rate; + + bw = drm_dp_bw_code_to_link_rate(bws[i]); + rate = zynqmp_dp_max_rate(bw, lane_cnt, bpp); + if (pclock <= rate) { + dp->mode.bw_code = bws[i]; + dp->mode.lane_cnt = lane_cnt; + dp->mode.pclock = pclock; + return dp->mode.bw_code; + } + } + + dev_err(dp->dev, "failed to configure link values\n"); + + return -EINVAL; +} + +/** + * zynqmp_dp_adjust_train - Adjust train values + * @dp: DisplayPort IP core structure + * @link_status: link status from sink which contains requested training values + */ +static void zynqmp_dp_adjust_train(struct zynqmp_dp *dp, + u8 link_status[DP_LINK_STATUS_SIZE]) +{ + u8 *train_set = dp->train_set; + u8 voltage = 0, preemphasis = 0; + u8 i; + + for (i = 0; i < dp->mode.lane_cnt; i++) { + u8 v = drm_dp_get_adjust_request_voltage(link_status, i); + u8 p = drm_dp_get_adjust_request_pre_emphasis(link_status, i); + + if (v > voltage) + voltage = v; + + if (p > preemphasis) + preemphasis = p; + } + + if (voltage >= DP_TRAIN_VOLTAGE_SWING_LEVEL_3) + voltage |= DP_TRAIN_MAX_SWING_REACHED; + + if (preemphasis >= DP_TRAIN_PRE_EMPH_LEVEL_2) + preemphasis |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; + + for (i = 0; i < dp->mode.lane_cnt; i++) + train_set[i] = voltage | preemphasis; +} + +/** + * zynqmp_dp_update_vs_emph - Update the training values + * @dp: DisplayPort IP core structure + * + * Update the training values based on the request from sink. The mapped values + * are predefined, and values(vs, pe, pc) are from the device manual. + * + * Return: 0 if vs and emph are updated successfully, or the error code returned + * by drm_dp_dpcd_write(). + */ +static int zynqmp_dp_update_vs_emph(struct zynqmp_dp *dp) +{ + u8 *train_set = dp->train_set; + u8 i, v_level, p_level; + int ret; + + ret = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_LANE0_SET, train_set, + dp->mode.lane_cnt); + if (ret < 0) + return ret; + + for (i = 0; i < dp->mode.lane_cnt; i++) { + u32 reg = ZYNQMP_DP_SUB_TX_PHY_PRECURSOR_LANE_0 + i * 4; + + v_level = (train_set[i] & DP_TRAIN_VOLTAGE_SWING_MASK) >> + DP_TRAIN_VOLTAGE_SWING_SHIFT; + p_level = (train_set[i] & DP_TRAIN_PRE_EMPHASIS_MASK) >> + DP_TRAIN_PRE_EMPHASIS_SHIFT; + + zynqmp_dp_write(dp->iomem, reg, 0x2); + } + + return 0; +} + +/** + * zynqmp_dp_link_train_cr - Train clock recovery + * @dp: DisplayPort IP core structure + * + * Return: 0 if clock recovery train is done successfully, or corresponding + * error code. + */ +static int zynqmp_dp_link_train_cr(struct zynqmp_dp *dp) +{ + u8 link_status[DP_LINK_STATUS_SIZE]; + u8 lane_cnt = dp->mode.lane_cnt; + u8 vs = 0, tries = 0; + u16 max_tries, i; + bool cr_done; + int ret; + + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_TRAINING_PATTERN_SET, + DP_TRAINING_PATTERN_1); + ret = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET, + DP_TRAINING_PATTERN_1 | + DP_LINK_SCRAMBLING_DISABLE); + if (ret < 0) + return ret; + + /* + * 256 loops should be maximum iterations for 4 lanes and 4 values. + * So, This loop should exit before 512 iterations + */ + for (max_tries = 0; max_tries < 512; max_tries++) { + ret = zynqmp_dp_update_vs_emph(dp); + if (ret) + return ret; + + drm_dp_link_train_clock_recovery_delay(dp->dpcd); + ret = drm_dp_dpcd_read_link_status(&dp->aux, link_status); + if (ret < 0) + return ret; + + cr_done = drm_dp_clock_recovery_ok(link_status, lane_cnt); + if (cr_done) + break; + + for (i = 0; i < lane_cnt; i++) + if (!(dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED)) + break; + if (i == lane_cnt) + break; + + if ((dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == vs) + tries++; + else + tries = 0; + + if (tries == DP_MAX_TRAINING_TRIES) + break; + + vs = dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; + zynqmp_dp_adjust_train(dp, link_status); + } + + if (!cr_done) + return -EIO; + + return 0; +} + +/** + * zynqmp_dp_link_train_ce - Train channel equalization + * @dp: DisplayPort IP core structure + * + * Return: 0 if channel equalization train is done successfully, or + * corresponding error code. + */ +static int zynqmp_dp_link_train_ce(struct zynqmp_dp *dp) +{ + u8 link_status[DP_LINK_STATUS_SIZE]; + u8 lane_cnt = dp->mode.lane_cnt; + u32 pat, tries; + int ret; + bool ce_done; + + if (dp->dpcd[DP_DPCD_REV] >= DP_V1_2 && + dp->dpcd[DP_MAX_LANE_COUNT] & DP_TPS3_SUPPORTED) + pat = DP_TRAINING_PATTERN_3; + else + pat = DP_TRAINING_PATTERN_2; + + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_TRAINING_PATTERN_SET, pat); + ret = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET, + pat | DP_LINK_SCRAMBLING_DISABLE); + if (ret < 0) + return ret; + + for (tries = 0; tries < DP_MAX_TRAINING_TRIES; tries++) { + ret = zynqmp_dp_update_vs_emph(dp); + if (ret) + return ret; + + drm_dp_link_train_channel_eq_delay(dp->dpcd); + ret = drm_dp_dpcd_read_link_status(&dp->aux, link_status); + if (ret < 0) + return ret; + + ce_done = drm_dp_channel_eq_ok(link_status, lane_cnt); + if (ce_done) + break; + + zynqmp_dp_adjust_train(dp, link_status); + } + + if (!ce_done) + return -EIO; + + return 0; +} + +/** + * zynqmp_dp_link_train - Train the link + * @dp: DisplayPort IP core structure + * + * Return: 0 if all trains are done successfully, or corresponding error code. + */ +static int zynqmp_dp_train(struct zynqmp_dp *dp) +{ + u32 reg; + u8 bw_code = dp->mode.bw_code; + u8 lane_cnt = dp->mode.lane_cnt; + u8 aux_lane_cnt = lane_cnt; + bool enhanced; + int ret; + + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_LANE_CNT_SET, lane_cnt); + enhanced = drm_dp_enhanced_frame_cap(dp->dpcd); + if (enhanced) { + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_ENHANCED_FRAME_EN, 1); + aux_lane_cnt |= DP_LANE_COUNT_ENHANCED_FRAME_EN; + } + + if (dp->dpcd[3] & 0x1) { + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_DOWNSPREAD_CTL, 1); + drm_dp_dpcd_writeb(&dp->aux, DP_DOWNSPREAD_CTRL, + DP_SPREAD_AMP_0_5); + } else { + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_DOWNSPREAD_CTL, 0); + drm_dp_dpcd_writeb(&dp->aux, DP_DOWNSPREAD_CTRL, 0); + } + + ret = drm_dp_dpcd_writeb(&dp->aux, DP_LANE_COUNT_SET, aux_lane_cnt); + if (ret < 0) { + dev_err(dp->dev, "failed to set lane count\n"); + return ret; + } + + ret = drm_dp_dpcd_writeb(&dp->aux, DP_MAIN_LINK_CHANNEL_CODING_SET, + DP_SET_ANSI_8B10B); + if (ret < 0) { + dev_err(dp->dev, "failed to set ANSI 8B/10B encoding\n"); + return ret; + } + + ret = drm_dp_dpcd_writeb(&dp->aux, DP_LINK_BW_SET, bw_code); + if (ret < 0) { + dev_err(dp->dev, "failed to set DP bandwidth\n"); + return ret; + } + + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_LINK_BW_SET, bw_code); + switch (bw_code) { + case DP_LINK_BW_1_62: + reg = ZYNQMP_DP_TX_PHY_CLOCK_FEEDBACK_SETTING_162; + break; + case DP_LINK_BW_2_7: + reg = ZYNQMP_DP_TX_PHY_CLOCK_FEEDBACK_SETTING_270; + break; + case DP_LINK_BW_5_4: + default: + reg = ZYNQMP_DP_TX_PHY_CLOCK_FEEDBACK_SETTING_540; + break; + } + + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_PHY_CLOCK_FEEDBACK_SETTING, + reg); + ret = zynqmp_dp_phy_ready(dp); + if (ret < 0) + return ret; + + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_SCRAMBLING_DISABLE, 1); + memset(dp->train_set, 0, 4); + ret = zynqmp_dp_link_train_cr(dp); + if (ret) + return ret; + + ret = zynqmp_dp_link_train_ce(dp); + if (ret) + return ret; + + ret = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET, + DP_TRAINING_PATTERN_DISABLE); + if (ret < 0) { + dev_err(dp->dev, "failed to disable training pattern\n"); + return ret; + } + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_TRAINING_PATTERN_SET, + DP_TRAINING_PATTERN_DISABLE); + + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_SCRAMBLING_DISABLE, 0); + + return 0; +} + +/** + * zynqmp_dp_train_loop - Downshift the link rate during training + * @dp: DisplayPort IP core structure + * + * Train the link by downshifting the link rate if training is not successful. + */ +static void zynqmp_dp_train_loop(struct zynqmp_dp *dp) +{ + struct zynqmp_dp_mode *mode = &dp->mode; + u8 bw = mode->bw_code; + int ret; + + do { + if (dp->status == connector_status_disconnected || + !dp->enabled) + return; + + ret = zynqmp_dp_train(dp); + if (!ret) + return; + + ret = zynqmp_dp_mode_configure(dp, mode->pclock, bw); + if (ret < 0) + goto err_out; + + bw = ret; + } while (bw >= DP_LINK_BW_1_62); + +err_out: + dev_err(dp->dev, "failed to train the DP link\n"); +} + +/* + * DP Aux functions + */ + +#define AUX_READ_BIT 0x1 + +/** + * zynqmp_dp_aux_cmd_submit - Submit aux command + * @dp: DisplayPort IP core structure + * @cmd: aux command + * @addr: aux address + * @buf: buffer for command data + * @bytes: number of bytes for @buf + * @reply: reply code to be returned + * + * Submit an aux command. All aux related commands, native or i2c aux + * read/write, are submitted through this function. The function is mapped to + * the transfer function of struct drm_dp_aux. This function involves in + * multiple register reads/writes, thus synchronization is needed, and it is + * done by drm_dp_helper using @hw_mutex. The calling thread goes into sleep + * if there's no immediate reply to the command submission. The reply code is + * returned at @reply if @reply != NULL. + * + * Return: 0 if the command is submitted properly, or corresponding error code: + * -EBUSY when there is any request already being processed + * -ETIMEDOUT when receiving reply is timed out + * -EIO when received bytes are less than requested + */ +static int zynqmp_dp_aux_cmd_submit(struct zynqmp_dp *dp, u32 cmd, u16 addr, + u8 *buf, u8 bytes, u8 *reply) +{ + bool is_read = (cmd & AUX_READ_BIT) ? true : false; + void __iomem *iomem = dp->iomem; + u32 reg, i; + + reg = zynqmp_dp_read(iomem, ZYNQMP_DP_TX_INTR_SIGNAL_STATE); + if (reg & ZYNQMP_DP_TX_INTR_SIGNAL_STATE_REQUEST) + return -EBUSY; + + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_AUX_ADDRESS, addr); + if (!is_read) + for (i = 0; i < bytes; i++) + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_AUX_WRITE_FIFO, + buf[i]); + + reg = cmd << ZYNQMP_DP_TX_AUX_COMMAND_CMD_SHIFT; + if (!buf || !bytes) + reg |= ZYNQMP_DP_TX_AUX_COMMAND_ADDRESS_ONLY; + else + reg |= (bytes - 1) << ZYNQMP_DP_TX_AUX_COMMAND_BYTES_SHIFT; + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_AUX_COMMAND, reg); + + /* Wait for reply to be delivered upto 2ms */ + for (i = 0; ; i++) { + reg = zynqmp_dp_read(iomem, ZYNQMP_DP_TX_INTR_SIGNAL_STATE); + if (reg & ZYNQMP_DP_TX_INTR_SIGNAL_STATE_REPLY) + break; + + if (reg & ZYNQMP_DP_TX_INTR_SIGNAL_STATE_REPLY_TIMEOUT || + i == 2) + return -ETIMEDOUT; + + usleep_range(1000, 1100); + } + + reg = zynqmp_dp_read(iomem, ZYNQMP_DP_TX_AUX_REPLY_CODE); + if (reply) + *reply = reg; + + if (is_read && + (reg == ZYNQMP_DP_TX_AUX_REPLY_CODE_AUX_ACK || + reg == ZYNQMP_DP_TX_AUX_REPLY_CODE_I2C_ACK)) { + reg = zynqmp_dp_read(iomem, ZYNQMP_DP_TX_REPLY_DATA_CNT); + if ((reg & ZYNQMP_DP_TX_AUX_REPLY_CNT_MASK) != bytes) + return -EIO; + + for (i = 0; i < bytes; i++) { + buf[i] = zynqmp_dp_read(iomem, + ZYNQMP_DP_TX_AUX_REPLY_DATA); + } + } + + return 0; +} + +static ssize_t +zynqmp_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg) +{ + struct zynqmp_dp *dp = container_of(aux, struct zynqmp_dp, aux); + int ret; + unsigned int i, iter; + + /* Number of loops = timeout in msec / aux delay (400 usec) */ + iter = zynqmp_dp_aux_timeout_ms * 1000 / 400; + iter = iter ? iter : 1; + + for (i = 0; i < iter; i++) { + ret = zynqmp_dp_aux_cmd_submit(dp, msg->request, msg->address, + msg->buffer, msg->size, + &msg->reply); + if (!ret) { + dev_dbg(dp->dev, "aux %d retries\n", i); + return msg->size; + } + + if (dp->status == connector_status_disconnected) { + dev_dbg(dp->dev, "no connected aux device\n"); + return -ENODEV; + } + + usleep_range(400, 500); + } + + dev_dbg(dp->dev, "failed to do aux transfer (%d)\n", ret); + + return ret; +} + +/** + * zynqmp_dp_init_aux - Initialize the DP aux + * @dp: DisplayPort IP core structure + * + * Initialize the DP aux. The aux clock is derived from the axi clock, so + * this function gets the axi clock frequency and calculates the filter + * value. Additionally, the interrupts and transmitter are enabled. + * + * Return: 0 on success, error value otherwise + */ +static int zynqmp_dp_init_aux(struct zynqmp_dp *dp) +{ + unsigned int rate; + u32 reg, w; + + rate = zynqmp_disp_get_apb_clk_rate(dp->dpsub->disp); + if (rate < ZYNQMP_DP_TX_CLK_DIVIDER_MHZ) { + dev_err(dp->dev, "aclk should be higher than 1MHz\n"); + return -EINVAL; + } + + /* Allowable values for this register are: 8, 16, 24, 32, 40, 48 */ + for (w = 8; w <= 48; w += 8) { + /* AUX pulse width should be between 0.4 to 0.6 usec */ + if (w >= (4 * rate / 10000000) && + w <= (6 * rate / 10000000)) + break; + } + + if (w > 48) { + dev_err(dp->dev, "aclk frequency too high\n"); + return -EINVAL; + } + reg = w << ZYNQMP_DP_TX_CLK_DIVIDER_AUX_FILTER_SHIFT; + reg |= rate / ZYNQMP_DP_TX_CLK_DIVIDER_MHZ; + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_CLK_DIVIDER, reg); + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_SUB_TX_INTR_EN, + ZYNQMP_DP_TX_INTR_ALL); + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_SUB_TX_INTR_DS, + ZYNQMP_DP_TX_NO_INTR_ALL); + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_ENABLE, 1); + + return 0; +} + +/** + * zynqmp_dp_exit_aux - De-initialize the DP aux + * @dp: DisplayPort IP core structure + * + * De-initialize the DP aux. Disable all interrupts which are enabled + * through aux initialization, as well as the transmitter. + */ +static void zynqmp_dp_exit_aux(struct zynqmp_dp *dp) +{ + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_ENABLE, 0); + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_SUB_TX_INTR_DS, 0xffffffff); +} + +/* + * Generic DP functions + */ + +/** + * zynqmp_dp_update_misc - Write the misc registers + * @dp: DisplayPort IP core structure + * + * The misc register values are stored in the structure, and this + * function applies the values into the registers. + */ +static void zynqmp_dp_update_misc(struct zynqmp_dp *dp) +{ + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_MAIN_STREAM_MISC0, + dp->config.misc0); + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_MAIN_STREAM_MISC1, + dp->config.misc1); +} + +/** + * zynqmp_dp_set_bpc - Set bpc value in software misc state + * @dp: DisplayPort IP core structure + * @bpc: bits per component + * + * Return: 0 on success, or the fallback bpc value + */ +static u8 zynqmp_dp_set_bpc(struct zynqmp_dp *dp, u8 bpc) +{ + struct zynqmp_dp_config *config = &dp->config; + u8 ret = 0; + + if (dp->connector.display_info.bpc && + dp->connector.display_info.bpc != bpc) { + dev_err(dp->dev, "requested bpc (%u) != display info (%u)\n", + bpc, dp->connector.display_info.bpc); + bpc = dp->connector.display_info.bpc; + } + + config->misc0 &= ~ZYNQMP_DP_MISC0_BPC_MASK; + switch (bpc) { + case 6: + config->misc0 |= ZYNQMP_DP_MISC0_BPC_6; + break; + case 8: + config->misc0 |= ZYNQMP_DP_MISC0_BPC_8; + break; + case 10: + config->misc0 |= ZYNQMP_DP_MISC0_BPC_10; + break; + case 12: + config->misc0 |= ZYNQMP_DP_MISC0_BPC_12; + break; + case 16: + config->misc0 |= ZYNQMP_DP_MISC0_BPC_16; + break; + default: + dev_err(dp->dev, "Not supported bpc (%u). fall back to 8bpc\n", + bpc); + config->misc0 |= ZYNQMP_DP_MISC0_BPC_8; + ret = 8; + break; + } + config->bpc = bpc; + zynqmp_dp_update_bpp(dp); + + return ret; +} + +/** + * zynqmp_dp_encoder_mode_set_transfer_unit - Set the transfer unit values + * @dp: DisplayPort IP core structure + * @mode: requested display mode + * + * Set the transfer unit, and caculate all transfer unit size related values. + * Calculation is based on DP and IP core specification. + */ +static void +zynqmp_dp_encoder_mode_set_transfer_unit(struct zynqmp_dp *dp, + struct drm_display_mode *mode) +{ + u32 tu = ZYNQMP_DP_TX_DEF_TRANSFER_UNIT_SIZE; + u32 bw, vid_kbytes, avg_bytes_per_tu, init_wait; + + /* Use the max transfer unit size (default) */ + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_TRANSFER_UNIT_SIZE, tu); + + vid_kbytes = mode->clock * (dp->config.bpp / 8); + bw = drm_dp_bw_code_to_link_rate(dp->mode.bw_code); + avg_bytes_per_tu = vid_kbytes * tu / (dp->mode.lane_cnt * bw / 1000); + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_MIN_BYTES_PER_TU, + avg_bytes_per_tu / 1000); + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_FRAC_BYTES_PER_TU, + avg_bytes_per_tu % 1000); + + /* Configure the initial wait cycle based on transfer unit size */ + if (tu < (avg_bytes_per_tu / 1000)) + init_wait = 0; + else if ((avg_bytes_per_tu / 1000) <= 4) + init_wait = tu; + else + init_wait = tu - avg_bytes_per_tu / 1000; + + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_INIT_WAIT, init_wait); +} + +/** + * zynqmp_dp_encoder_mode_set_stream - Configure the main stream + * @dp: DisplayPort IP core structure + * @mode: requested display mode + * + * Configure the main stream based on the requested mode @mode. Calculation is + * based on IP core specification. + */ +void zynqmp_dp_encoder_mode_set_stream(struct zynqmp_dp *dp, + struct drm_display_mode *mode) +{ + void __iomem *iomem = dp->iomem; + u8 lane_cnt = dp->mode.lane_cnt; + u32 reg, wpl; + unsigned int rate; + + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_MAIN_STREAM_HTOTAL, mode->htotal); + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_MAIN_STREAM_VTOTAL, mode->vtotal); + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_MAIN_STREAM_POLARITY, + (!!(mode->flags & DRM_MODE_FLAG_PVSYNC) << + ZYNQMP_DP_TX_MAIN_STREAM_POLARITY_VSYNC_SHIFT) | + (!!(mode->flags & DRM_MODE_FLAG_PHSYNC) << + ZYNQMP_DP_TX_MAIN_STREAM_POLARITY_HSYNC_SHIFT)); + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_MAIN_STREAM_HSWIDTH, + mode->hsync_end - mode->hsync_start); + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_MAIN_STREAM_VSWIDTH, + mode->vsync_end - mode->vsync_start); + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_MAIN_STREAM_HRES, mode->hdisplay); + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_MAIN_STREAM_VRES, mode->vdisplay); + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_MAIN_STREAM_HSTART, + mode->htotal - mode->hsync_start); + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_MAIN_STREAM_VSTART, + mode->vtotal - mode->vsync_start); + + /* In synchronous mode, set the diviers */ + if (dp->config.misc0 & ZYNQMP_DP_TX_MAIN_STREAM_MISC0_SYNC) { + reg = drm_dp_bw_code_to_link_rate(dp->mode.bw_code); + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_N_VID, reg); + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_M_VID, mode->clock); + rate = zynqmp_disp_get_aud_clk_rate(dp->dpsub->disp); + if (rate) { + dev_dbg(dp->dev, "Audio rate: %d\n", rate / 512); + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_AUDIO_N_AUD, reg); + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_AUDIO_M_AUD, + rate / 1000); + } + } + + /* Only 2 channel audio is supported now */ + if (zynqmp_disp_aud_enabled(dp->dpsub->disp)) + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_AUDIO_CHANNELS, 1); + + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_USER_PIXEL_WIDTH, 1); + + /* Translate to the native 16 bit datapath based on IP core spec */ + wpl = (mode->hdisplay * dp->config.bpp + 15) / 16; + reg = wpl + wpl % lane_cnt - lane_cnt; + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_USER_DATA_CNT_PER_LANE, reg); +} + +/* + * DRM connector functions + */ + +static enum drm_connector_status +zynqmp_dp_connector_detect(struct drm_connector *connector, bool force) +{ + struct zynqmp_dp *dp = connector_to_dp(connector); + struct zynqmp_dp_link_config *link_config = &dp->link_config; + u32 state, i; + int ret; + + /* + * This is from heuristic. It takes some delay (ex, 100 ~ 500 msec) to + * get the HPD signal with some monitors. + */ + for (i = 0; i < 10; i++) { + state = zynqmp_dp_read(dp->iomem, + ZYNQMP_DP_TX_INTR_SIGNAL_STATE); + if (state & ZYNQMP_DP_TX_INTR_SIGNAL_STATE_HPD) + break; + msleep(100); + } + + if (state & ZYNQMP_DP_TX_INTR_SIGNAL_STATE_HPD) { + ret = drm_dp_dpcd_read(&dp->aux, 0x0, dp->dpcd, + sizeof(dp->dpcd)); + if (ret < 0) { + dev_dbg(dp->dev, "DPCD read failes"); + goto disconnected; + } + + link_config->max_rate = min_t(int, + drm_dp_max_link_rate(dp->dpcd), + DP_HIGH_BIT_RATE2); + link_config->max_lanes = min_t(u8, + drm_dp_max_lane_count(dp->dpcd), + dp->num_lanes); + + dp->status = connector_status_connected; + return connector_status_connected; + } + +disconnected: + dp->status = connector_status_disconnected; + return connector_status_disconnected; +} + +static int zynqmp_dp_connector_get_modes(struct drm_connector *connector) +{ + struct zynqmp_dp *dp = connector_to_dp(connector); + struct edid *edid; + int ret; + + edid = drm_get_edid(connector, &dp->aux.ddc); + if (!edid) + return 0; + + drm_mode_connector_update_edid_property(connector, edid); + ret = drm_add_edid_modes(connector, edid); + kfree(edid); + + return ret; +} + +static struct drm_encoder * +zynqmp_dp_connector_best_encoder(struct drm_connector *connector) +{ + struct zynqmp_dp *dp = connector_to_dp(connector); + + return &dp->encoder; +} + +static int zynqmp_dp_connector_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct zynqmp_dp *dp = connector_to_dp(connector); + u8 max_lanes = dp->link_config.max_lanes; + u8 bpp = dp->config.bpp; + int max_rate = dp->link_config.max_rate; + int rate; + + if (mode->clock > ZYNQMP_MAX_FREQ) { + dev_dbg(dp->dev, "filtered the mode, %s,for high pixel rate\n", + mode->name); + drm_mode_debug_printmodeline(mode); + return MODE_CLOCK_HIGH; + } + + /* Check with link rate and lane count */ + rate = zynqmp_dp_max_rate(max_rate, max_lanes, bpp); + if (mode->clock > rate) { + dev_dbg(dp->dev, "filtered the mode, %s,for high pixel rate\n", + mode->name); + drm_mode_debug_printmodeline(mode); + return MODE_CLOCK_HIGH; + } + + return MODE_OK; +} + +static void zynqmp_dp_connector_destroy(struct drm_connector *connector) +{ + drm_connector_unregister(connector); + drm_connector_cleanup(connector); +} + +static const struct drm_connector_funcs zynqmp_dp_connector_funcs = { + .detect = zynqmp_dp_connector_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = zynqmp_dp_connector_destroy, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, + .reset = drm_atomic_helper_connector_reset, +}; + +static struct drm_connector_helper_funcs zynqmp_dp_connector_helper_funcs = { + .get_modes = zynqmp_dp_connector_get_modes, + .best_encoder = zynqmp_dp_connector_best_encoder, + .mode_valid = zynqmp_dp_connector_mode_valid, +}; + +/* + * DRM encoder functions + */ + +static void zynqmp_dp_encoder_enable(struct drm_encoder *encoder) +{ + struct zynqmp_dp *dp = encoder_to_dp(encoder); + void __iomem *iomem = dp->iomem; + unsigned int i; + int ret = 0; + + pm_runtime_get_sync(dp->dev); + dp->enabled = true; + zynqmp_dp_init_aux(dp); + zynqmp_dp_update_misc(dp); + if (zynqmp_disp_aud_enabled(dp->dpsub->disp)) + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_AUDIO_CONTROL, 1); + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_PHY_POWER_DOWN, 0); + if (dp->status == connector_status_connected) { + for (i = 0; i < 3; i++) { + ret = drm_dp_dpcd_writeb(&dp->aux, DP_SET_POWER, + DP_SET_POWER_D0); + if (ret == 1) + break; + usleep_range(300, 500); + } + /* Some monitors take time to wake up properly */ + msleep(zynqmp_dp_power_on_delay_ms); + } + if (ret != 1) + dev_dbg(dp->dev, "DP aux failed\n"); + else + zynqmp_dp_train_loop(dp); + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_SW_RESET, + ZYNQMP_DP_TX_SW_RESET_ALL); + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_ENABLE_MAIN_STREAM, 1); +} + +static void zynqmp_dp_encoder_disable(struct drm_encoder *encoder) +{ + struct zynqmp_dp *dp = encoder_to_dp(encoder); + void __iomem *iomem = dp->iomem; + + dp->enabled = false; + cancel_delayed_work(&dp->hpd_work); + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_ENABLE_MAIN_STREAM, 0); + drm_dp_dpcd_writeb(&dp->aux, DP_SET_POWER, DP_SET_POWER_D3); + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_PHY_POWER_DOWN, + ZYNQMP_DP_TX_PHY_POWER_DOWN_ALL); + if (zynqmp_disp_aud_enabled(dp->dpsub->disp)) + zynqmp_dp_write(iomem, ZYNQMP_DP_TX_AUDIO_CONTROL, 0); + pm_runtime_put_sync(dp->dev); +} + +static void +zynqmp_dp_encoder_atomic_mode_set(struct drm_encoder *encoder, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *connector_state) +{ + struct zynqmp_dp *dp = encoder_to_dp(encoder); + struct drm_display_mode *mode = &crtc_state->mode; + struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode; + u8 max_lanes = dp->link_config.max_lanes; + u8 bpp = dp->config.bpp; + int rate, max_rate = dp->link_config.max_rate; + int ret; + + /* Check again as bpp or format might have been chagned */ + rate = zynqmp_dp_max_rate(max_rate, max_lanes, bpp); + if (mode->clock > rate) { + dev_err(dp->dev, "the mode, %s,has too high pixel rate\n", + mode->name); + drm_mode_debug_printmodeline(mode); + } + + ret = zynqmp_dp_mode_configure(dp, adjusted_mode->clock, 0); + if (ret < 0) + return; + + zynqmp_dp_encoder_mode_set_transfer_unit(dp, adjusted_mode); +} + +#define ZYNQMP_DP_MIN_H_BACKPORCH 20 + +static int +zynqmp_dp_encoder_atomic_check(struct drm_encoder *encoder, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state) +{ + struct drm_display_mode *mode = &crtc_state->mode; + struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode; + int diff = mode->htotal - mode->hsync_end; + + /* + * ZynqMP DP requires horizontal backporch to be greater than 12. + * This limitation may not be compatible with the sink device. + */ + if (diff < ZYNQMP_DP_MIN_H_BACKPORCH) { + int vrefresh = (adjusted_mode->clock * 1000) / + (adjusted_mode->vtotal * adjusted_mode->htotal); + + dev_dbg(encoder->dev->dev, "hbackporch adjusted: %d to %d", + diff, ZYNQMP_DP_MIN_H_BACKPORCH - diff); + diff = ZYNQMP_DP_MIN_H_BACKPORCH - diff; + adjusted_mode->htotal += diff; + adjusted_mode->clock = adjusted_mode->vtotal * + adjusted_mode->htotal * vrefresh / 1000; + } + + return 0; +} + +static const struct drm_encoder_funcs zynqmp_dp_encoder_funcs = { + .destroy = drm_encoder_cleanup, +}; + +static const struct drm_encoder_helper_funcs zynqmp_dp_encoder_helper_funcs = { + .enable = zynqmp_dp_encoder_enable, + .disable = zynqmp_dp_encoder_disable, + .atomic_mode_set = zynqmp_dp_encoder_atomic_mode_set, + .atomic_check = zynqmp_dp_encoder_atomic_check, +}; + +/* + * Component functions + */ + +static void zynqmp_dp_hpd_work_func(struct work_struct *work) +{ + struct zynqmp_dp *dp; + + dp = container_of(work, struct zynqmp_dp, hpd_work.work); + + if (dp->drm) + drm_helper_hpd_irq_event(dp->drm); +} + +int zynqmp_dp_bind(struct device *dev, struct device *master, void *data) +{ + struct zynqmp_dpsub *dpsub = dev_get_drvdata(dev); + struct zynqmp_dp *dp = dpsub->dp; + struct drm_encoder *encoder = &dp->encoder; + struct drm_connector *connector = &dp->connector; + struct drm_device *drm = data; + struct device_node *port; + int ret; + + encoder->possible_crtcs |= zynqmp_disp_get_crtc_mask(dpsub->disp); + for_each_child_of_node(dev->of_node, port) { + if (!port->name || of_node_cmp(port->name, "port")) + continue; + encoder->possible_crtcs |= drm_of_find_possible_crtcs(drm, + port); + } + drm_encoder_init(drm, encoder, &zynqmp_dp_encoder_funcs, + DRM_MODE_ENCODER_TMDS, NULL); + drm_encoder_helper_add(encoder, &zynqmp_dp_encoder_helper_funcs); + + connector->polled = DRM_CONNECTOR_POLL_HPD; + ret = drm_connector_init(encoder->dev, connector, + &zynqmp_dp_connector_funcs, + DRM_MODE_CONNECTOR_DisplayPort); + if (ret) { + dev_err(dp->dev, "failed to initialize the drm connector"); + goto error_encoder; + } + + drm_connector_helper_add(connector, &zynqmp_dp_connector_helper_funcs); + drm_connector_register(connector); + drm_mode_connector_attach_encoder(connector, encoder); + connector->dpms = DRM_MODE_DPMS_OFF; + + dp->drm = drm; + dp->config.misc0 &= ~ZYNQMP_DP_TX_MAIN_STREAM_MISC0_SYNC; + ret = zynqmp_dp_set_bpc(dp, 8); + zynqmp_dp_update_bpp(dp); + + /* This enables interrupts, so should be called after DRM init */ + ret = zynqmp_dp_init_aux(dp); + if (ret) { + dev_err(dp->dev, "failed to initialize DP aux"); + goto error_connector; + } + INIT_DELAYED_WORK(&dp->hpd_work, zynqmp_dp_hpd_work_func); + + return 0; + +error_connector: + zynqmp_dp_connector_destroy(&dp->connector); +error_encoder: + drm_encoder_cleanup(&dp->encoder); + return ret; +} + +void zynqmp_dp_unbind(struct device *dev, struct device *master, void *data) +{ + struct zynqmp_dpsub *dpsub = dev_get_drvdata(dev); + struct zynqmp_dp *dp = dpsub->dp; + + cancel_delayed_work_sync(&dp->hpd_work); + disable_irq(dp->irq); + zynqmp_dp_exit_aux(dp); + zynqmp_dp_connector_destroy(&dp->connector); + drm_encoder_cleanup(&dp->encoder); +} + +/* + * Platform functions + */ + +static irqreturn_t zynqmp_dp_irq_handler(int irq, void *data) +{ + struct zynqmp_dp *dp = (struct zynqmp_dp *)data; + u32 status, mask; + + status = zynqmp_dp_read(dp->iomem, ZYNQMP_DP_SUB_TX_INTR_STATUS); + mask = zynqmp_dp_read(dp->iomem, ZYNQMP_DP_SUB_TX_INTR_MASK); + if (!(status & ~mask)) + return IRQ_NONE; + + /* dbg for diagnostic, but not much that the driver can do */ + if (status & ZYNQMP_DP_TX_INTR_CHBUF_UNDERFLW_MASK) + dev_dbg_ratelimited(dp->dev, "underflow interrupt\n"); + if (status & ZYNQMP_DP_TX_INTR_CHBUF_OVERFLW_MASK) + dev_dbg_ratelimited(dp->dev, "overflow interrupt\n"); + + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_SUB_TX_INTR_STATUS, status); + + /* The DP vblank will not be enabled with remote crtc device */ + if (status & ZYNQMP_DP_TX_INTR_VBLANK_START) + zynqmp_disp_handle_vblank(dp->dpsub->disp); + + if (status & ZYNQMP_DP_TX_INTR_HPD_EVENT) + schedule_delayed_work(&dp->hpd_work, 0); + + if (status & ZYNQMP_DP_TX_INTR_HPD_IRQ) { + int ret; + u8 status[DP_LINK_STATUS_SIZE + 2]; + + ret = drm_dp_dpcd_read(&dp->aux, DP_SINK_COUNT, status, + DP_LINK_STATUS_SIZE + 2); + if (ret < 0) + goto handled; + + if (status[4] & DP_LINK_STATUS_UPDATED || + !drm_dp_clock_recovery_ok(&status[2], dp->mode.lane_cnt) || + !drm_dp_channel_eq_ok(&status[2], dp->mode.lane_cnt)) { + zynqmp_dp_train_loop(dp); + } + } + +handled: + return IRQ_HANDLED; +} + +int zynqmp_dp_probe(struct platform_device *pdev) +{ + struct zynqmp_dpsub *dpsub; + struct zynqmp_dp *dp; + struct resource *res; + unsigned int i; + int irq, ret; + + dp = devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL); + if (!dp) + return -ENOMEM; + + dp->dpms = DRM_MODE_DPMS_OFF; + dp->status = connector_status_disconnected; + dp->dev = &pdev->dev; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dp"); + dp->iomem = devm_ioremap_resource(dp->dev, res); + if (IS_ERR(dp->iomem)) + return PTR_ERR(dp->iomem); + + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_PHY_POWER_DOWN, + ZYNQMP_DP_TX_PHY_POWER_DOWN_ALL); + zynqmp_dp_set(dp->iomem, ZYNQMP_DP_TX_PHY_CONFIG, + ZYNQMP_DP_TX_PHY_CONFIG_ALL_RESET); + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_FORCE_SCRAMBLER_RESET, 1); + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_ENABLE, 0); + + dp->num_lanes = 2; + for (i = 0; i < ZYNQMP_DP_MAX_LANES; i++) { + char phy_name[16]; + + snprintf(phy_name, sizeof(phy_name), "dp-phy%d", i); + dp->phy[i] = devm_phy_get(dp->dev, phy_name); + if (IS_ERR(dp->phy[i])) { + /* 2nd lane is optional */ + if (i == 0 || PTR_ERR(dp->phy[i]) != -ENODEV) { + dev_err(dp->dev, "failed to get phy lane\n"); + ret = PTR_ERR(dp->phy[i]); + dp->phy[i] = NULL; + return ret; + } + dp->phy[i] = NULL; + dp->num_lanes = 1; + } + } + + ret = zynqmp_dp_init_phy(dp); + if (ret) + goto error_phy; + + dp->aux.name = "ZynqMP DP AUX"; + dp->aux.dev = dp->dev; + dp->aux.transfer = zynqmp_dp_aux_transfer; + ret = drm_dp_aux_register(&dp->aux); + if (ret < 0) { + dev_err(dp->dev, "failed to initialize DP aux\n"); + goto error; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = irq; + goto error; + } + + ret = devm_request_threaded_irq(dp->dev, irq, NULL, + zynqmp_dp_irq_handler, IRQF_ONESHOT, + dev_name(dp->dev), dp); + if (ret < 0) + goto error; + dp->irq = irq; + + dpsub = platform_get_drvdata(pdev); + dpsub->dp = dp; + dp->dpsub = dpsub; + + return 0; + +error: + drm_dp_aux_unregister(&dp->aux); +error_phy: + zynqmp_dp_exit_phy(dp); + return ret; +} + +int zynqmp_dp_remove(struct platform_device *pdev) +{ + struct zynqmp_dpsub *dpsub = platform_get_drvdata(pdev); + struct zynqmp_dp *dp = dpsub->dp; + + zynqmp_dp_write(dp->iomem, ZYNQMP_DP_TX_ENABLE, 0); + drm_dp_aux_unregister(&dp->aux); + zynqmp_dp_exit_phy(dp); + dpsub->dp = NULL; + + return 0; +} diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.h b/drivers/gpu/drm/xlnx/zynqmp_dp.h new file mode 100644 index 0000000..2d7cb8a --- /dev/null +++ b/drivers/gpu/drm/xlnx/zynqmp_dp.h @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ZynqMP DisplayPort Driver + * + * Copyright (C) 2017 - 2018 Xilinx, Inc. + * + * Author: Hyun Woo Kwon hyun.kwon@xilinx.com + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _ZYNQMP_DP_H_ +#define _ZYNQMP_DP_H_ + +struct zynqmp_dp; +struct drm_display_mode; + +const int zynqmp_dp_set_color(struct zynqmp_dp *dp, const char *color); +void zynqmp_dp_enable_vblank(struct zynqmp_dp *dp); +void zynqmp_dp_disable_vblank(struct zynqmp_dp *dp); +void zynqmp_dp_encoder_mode_set_stream(struct zynqmp_dp *dp, + struct drm_display_mode *mode); + +int zynqmp_dp_bind(struct device *dev, struct device *master, void *data); +void zynqmp_dp_unbind(struct device *dev, struct device *master, void *data); + +int zynqmp_dp_probe(struct platform_device *pdev); +int zynqmp_dp_remove(struct platform_device *pdev); + +#endif /* _ZYNQMP_DP_H_ */ -- 2.7.4
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.