add write_s_mask function in cmdq helper functions which writes value contains in internal register to address with mask and large dma access support.
Signed-off-by: Dennis YC Hsieh dennis-yc.hsieh@mediatek.com --- drivers/soc/mediatek/mtk-cmdq-helper.c | 23 +++++++++++++++++++++++ include/linux/mailbox/mtk-cmdq-mailbox.h | 1 + include/linux/soc/mediatek/mtk-cmdq.h | 18 ++++++++++++++++++ 3 files changed, 42 insertions(+)
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c index 880349b3f16c..550e9e7e3ff2 100644 --- a/drivers/soc/mediatek/mtk-cmdq-helper.c +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c @@ -242,6 +242,29 @@ int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, } EXPORT_SYMBOL(cmdq_pkt_write_s);
+int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, + u16 addr_low, u16 src_reg_idx, u32 mask) +{ + struct cmdq_instruction inst = {}; + int err; + + inst.op = CMDQ_CODE_MASK; + inst.mask = ~mask; + err = cmdq_pkt_append_command(pkt, inst); + if (err < 0) + return err; + + inst.mask = 0; + inst.op = CMDQ_CODE_WRITE_S_MASK; + inst.src_t = CMDQ_REG_TYPE; + inst.sop = high_addr_reg_idx; + inst.offset = addr_low; + inst.src_reg = src_reg_idx; + + return cmdq_pkt_append_command(pkt, inst); +} +EXPORT_SYMBOL(cmdq_pkt_write_s_mask); + int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event) { struct cmdq_instruction inst = { {0} }; diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h index 1f76cfedb16d..90d1d8e64412 100644 --- a/include/linux/mailbox/mtk-cmdq-mailbox.h +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h @@ -61,6 +61,7 @@ enum cmdq_code { CMDQ_CODE_WFE = 0x20, CMDQ_CODE_EOC = 0x40, CMDQ_CODE_WRITE_S = 0x90, + CMDQ_CODE_WRITE_S_MASK = 0x91, CMDQ_CODE_LOGIC = 0xa0, };
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h index 9b0c57a0063d..53230341bf94 100644 --- a/include/linux/soc/mediatek/mtk-cmdq.h +++ b/include/linux/soc/mediatek/mtk-cmdq.h @@ -122,6 +122,24 @@ int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low, u16 src_reg_idx);
/** + * cmdq_pkt_write_s_mask() - append write_s with mask command to the CMDQ packet + * @pkt: the CMDQ packet + * @high_addr_reg_idx: internal register ID which contains high address of pa + * @addr_low: low address of pa + * @src_reg_idx: the CMDQ internal register ID which cache source value + * @mask: the specified target address mask, use U32_MAX if no need + * + * Return: 0 for success; else the error code is returned + * + * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH() + * to get high address and call cmdq_pkt_assign() to assign value into internal + * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when + * call to this function. + */ +int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, + u16 addr_low, u16 src_reg_idx, u32 mask); + +/** * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet * @pkt: the CMDQ packet * @event: the desired event type to "wait and CLEAR"