Hi All
Hopefully I've cc'ed all those that have bashed this problem around previously, or are otherwise linked to DRM bridges.
There have been numerous discussions around how DSI support is currently broken as it doesn't support initialising the PHY to LP-11 and potentially the clock lane to HS prior to configuring the DSI peripheral. There is no op where the interface is initialised but HS video isn't also being sent. Currently you have: - peripheral pre_enable (host not initialised yet) - host pre_enable - encoder enable - host enable - peripheral enable (video already running)
vc4 and exynos currently implement the DSI host as an encoder, and split the bridge_chain. This fails if you want to switch to being a bridge and/or use atomic calls as the state of all the elements split off are not added by drm_atomic_add_encoder_bridges.
dw-mipi-dsi[1] and now msm[2] use the mode_set hook to initialise the PHY, so the bridge/panel pre_enable can send commands. In their post_disable they then call the downstream bridge/panel post_disable op manually so that shutdown commands can be sent before shutting down the PHY. Nothing handles that fact, so the framework then continues down the bridge chain and calls the post_disable again, so we get unbalanced panel prepare/unprepare calls being reported [3].
There have been patches[4] proposing reversing the entire direction of pre_enable and post_disable, but that risks driving voltage into devices that have yet to be powered up. There have been discussions about adding either a pre_pre_enable, or adding a DSI host_op to initialise the host[5]. Both require significant reworking to all existing drivers in moving initialisation phases. We have patches that look like they may well be addressing race conditions in starting up a DSI peripheral[6].
This patch takes a hybrid of the two: an optional reversing of the order for specific links within the bridge chain within pre_enable and post_disable done within the drm_bridge framework. I'm more than happy to move where the flag exists in structures (currently as DRM_BRIDGE_OP_UPSTREAM_FIRST in drm_bridge_ops, but it isn't an op), but does this solve the problem posed? If not, then can you describe the actual scenario it doesn't cover? A DSI peripheral can set the flag to get the DSI host initialised first, and therefore it has a stable LP-11 state before pre_enable. Likewise the peripheral can still send shutdown commands prior to the DSI host being shut down in post_disable. It also handles the case where there are multiple devices in the chain that all want their upstream bridge enabled first, so should there be a DSI mux between host and peripheral, then it can still get the host to the correct state.
An example tree is at [7] which is drm-misc-next with these patches and then a conversion of vc4_dsi to use the atomic bridge functions (will be upstreamed once we're over this hurdle). It is working happily with the Toshiba TC358762 on a Raspberry Pi 7" panel. The same approach but on our vendor 5.15 tree[8] has also been tested successfully on a TI SN65DSI83 and LVDS panel.
Whilst here, I've also documented the expected behaviour of DSI hosts and peripherals to aid those who come along after.
Thanks Dave
[1] https://github.com/torvalds/linux/blob/master/drivers/gpu/drm/bridge/synopsy... [2] https://lists.freedesktop.org/archives/dri-devel/2022-January/337769.html [3] https://lists.freedesktop.org/archives/dri-devel/2021-December/333908.html [4] https://lists.freedesktop.org/archives/dri-devel/2021-October/328476.html [5] https://lists.freedesktop.org/archives/dri-devel/2021-October/325853.html [6] https://lists.freedesktop.org/archives/dri-devel/2022-February/341852.html [7] https://github.com/6by9/linux/tree/drm-misc-next-vc4_dsi [8] https://github.com/6by9/linux/tree/rpi-5.15.y-sn65dsi83
Dave Stevenson (2): drm: Introduce DRM_BRIDGE_OP_UPSTREAM_FIRST to alter bridge init order drm/bridge: Document the expected behaviour of DSI host controllers
Documentation/gpu/drm-kms-helpers.rst | 7 + drivers/gpu/drm/drm_bridge.c | 235 ++++++++++++++++++++++++++++++---- include/drm/drm_bridge.h | 8 ++ 3 files changed, 225 insertions(+), 25 deletions(-)