Though I don't have access to any hardware that uses ti-sn65dsi86 and _doesn't_ provide a "refclk", I believe that we'll have trouble reading the EDID at bootup in that case. Specifically I believe that if there's no "refclk" we need the MIPI source clock to be active before we can successfully read the EDID. My evidence here is that, in testing, I couldn't read the EDID until I turned on the DPPLL in the bridge chip and that the DPPLL needs the input clock to be active.
Since this is hard to support, let's punt trying to read the EDID if there's no "refclk".
I don't believe there are any users of the ti-sn65dsi86 bridge chip that _don't_ use "refclk". The bridge chip is _very_ inflexible in that mode. The only time I've seen that mode used was for some really early prototype hardware that was thrown in the e-waste bin years ago when we realized how inflexible it was.
Even if someone is using the bridge chip without the "refclk" they're in no worse shape than they were before the (fairly recent) commit 58074b08c04a ("drm/bridge: ti-sn65dsi86: Read EDID blob over DDC").
Signed-off-by: Douglas Anderson dianders@chromium.org ---
(no changes since v1)
drivers/gpu/drm/bridge/ti-sn65dsi86.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c index 673c9f1c2d8e..92498900c58d 100644 --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c @@ -273,6 +273,18 @@ static int ti_sn_bridge_connector_get_modes(struct drm_connector *connector) bool was_enabled; int num = 0;
+ /* + * Don't try to read the EDID if no refclk. In theory it is possible + * to make this work but it's tricky. I believe that we need to get + * our upstream MIPI source to provide a pixel clock before we can + * do AUX transations but we need to be able to read the EDID before + * we've picked a display mode. The bridge is already super limited + * if you try to use it without a refclk so presumably limiting to + * the fixed modes our downstream panel reports is fine. + */ + if (!pdata->refclk) + goto exit; + /* * Try to get the EDID first without anything special. There are * three things that could happen with this call. @@ -306,6 +318,7 @@ static int ti_sn_bridge_connector_get_modes(struct drm_connector *connector) return num; }
+exit: return drm_panel_get_modes(pdata->panel, connector); }