Currently the memory controller and master priorities drivers are enabled in da850.dtsi. For boards for which there are no settings defined, this makes these drivers emit error messages.
Disable the nodes in da850.dtsi and only enable them for da850-lcdk - the only board that currently needs them.
Signed-off-by: Bartosz Golaszewski bgolaszewski@baylibre.com --- arch/arm/boot/dts/da850-lcdk.dts | 8 ++++++++ arch/arm/boot/dts/da850.dtsi | 2 ++ 2 files changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index 6952c68..d0f7680 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -285,3 +285,11 @@ remote-endpoint = <&vga_bridge_in>; }; }; + +&prictrl { + status = "okay"; +}; + +&memctrl { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 9b7c444..2ea0e06 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -213,6 +213,7 @@ prictrl: priority-controller@14110 { compatible = "ti,da850-mstpri"; reg = <0x14110 0x0c>; + status = "disabled"; }; cfgchip: chip-controller@1417c { compatible = "ti,da830-cfgchip", "syscon", "simple-mfd"; @@ -486,5 +487,6 @@ memctrl: memory-controller@b0000000 { compatible = "ti,da850-ddr-controller"; reg = <0xb0000000 0xe8>; + status = "disabled"; }; };