https://bugs.freedesktop.org/show_bug.cgi?id=28671
--- Comment #15 from Brett Witherspoon brett.witherspoon@comcast.net 2010-06-26 13:03:58 PDT --- Created an attachment (id=36526) --> (https://bugs.freedesktop.org/attachment.cgi?id=36526) dmesg: first connector table patch
Ok, gave this table a try. I had to fuzz a few lines to get the patch to apply to the 2.6.34 sources. I assume you must be working with some git branch. If it would be best that I use the same source your working with let me know.
Attached is the dmesg. I noticed the connector_id is the same for both entries. Are we testing with just one connector? The drivers reports that there is nothing connected to the connector. I do not know how the Connector [0-1] are enumerated, but I was unable to connect a monitor to the ADT port as I don't have an adaptor yet. I ordered one though, so it should be here be the end of this next week.
I do not know of anyway to determine which physical connector this would be and I assume if the dac,tmds or ddc lines or incorrect it might not be detected. Is this the case?
Also if it is any use; the connectors appear to be DVI-D (Analog and Digital, Dual link) and of course the ADT one has some additional pins.