The connector_type for following two EDT displays is missing: - EDT ETM0430G0DH6 - EDT ETM0700G0BDH6
Both are parallel displays thus add the corresponding connector_type.
Signed-off-by: Stefan Riedmueller s.riedmueller@phytec.de --- drivers/gpu/drm/panel/panel-simple.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 99edd640d700..109dc8c85947 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1940,6 +1940,7 @@ static const struct panel_desc edt_etm0430g0dh6 = { .width = 95, .height = 54, }, + .connector_type = DRM_MODE_CONNECTOR_DPI, };
static const struct drm_display_mode edt_et057090dhu_mode = { @@ -2004,6 +2005,7 @@ static const struct panel_desc edt_etm0700g0bdh6 = { }, .bus_format = MEDIA_BUS_FMT_RGB666_1X18, .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, + .connector_type = DRM_MODE_CONNECTOR_DPI, };
static const struct display_timing evervision_vgg804821_timing = {