This string- and electrical configuration depend on the board and panel, and should hence not be defined generically for every user of pm660l. SoMainline will pick this configuration again when enabling WLED on the Sony Nile platform.
Fixes: 7b56a804e58b ("arm64: dts: qcom: pm660l: Add WLED support") Signed-off-by: Marijn Suijten marijn.suijten@somainline.org Reviewed-By: AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org --- arch/arm64/boot/dts/qcom/pm660l.dtsi | 7 ------- 1 file changed, 7 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi index 05086cbe573b..cfef42353611 100644 --- a/arch/arm64/boot/dts/qcom/pm660l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi @@ -72,13 +72,6 @@ pm660l_wled: leds@d800 { interrupt-names = "ovp"; label = "backlight";
- qcom,switching-freq = <800>; - qcom,ovp-millivolt = <29600>; - qcom,current-boost-limit = <970>; - qcom,current-limit-microamp = <20000>; - qcom,num-strings = <2>; - qcom,enabled-strings = <0 1>; - status = "disabled"; };
-- 2.33.0