Link status is different from display connected status in the case of something like an Apple dongle where the type-c plug can be connected, and therefore the link is connected, but no sink is connected until an HDMI cable is plugged into the dongle. The sink_count of DPCD of dongle will increase to 1 once an HDMI cable is plugged into the dongle so that display connected status will become true. This checking also apply at pm_resume.
Changes in v4: -- none
Fixes: 94e58e2d06e3 ("drm/msm/dp: reset dp controller only at boot up and pm_resume") Reported-by: Stephen Boyd swboyd@chromium.org Reviewed-by: Stephen Boyd swboyd@chromium.org Tested-by: Stephen Boyd swboyd@chromium.org Signed-off-by: Kuogee Hsieh khsieh@codeaurora.org --- drivers/gpu/drm/msm/dp/dp_display.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c index 5a39da6..0ba71c7 100644 --- a/drivers/gpu/drm/msm/dp/dp_display.c +++ b/drivers/gpu/drm/msm/dp/dp_display.c @@ -586,10 +586,8 @@ static int dp_connect_pending_timeout(struct dp_display_private *dp, u32 data) mutex_lock(&dp->event_mutex);
state = dp->hpd_state; - if (state == ST_CONNECT_PENDING) { - dp_display_enable(dp, 0); + if (state == ST_CONNECT_PENDING) dp->hpd_state = ST_CONNECTED; - }
mutex_unlock(&dp->event_mutex);
@@ -669,10 +667,8 @@ static int dp_disconnect_pending_timeout(struct dp_display_private *dp, u32 data mutex_lock(&dp->event_mutex);
state = dp->hpd_state; - if (state == ST_DISCONNECT_PENDING) { - dp_display_disable(dp, 0); + if (state == ST_DISCONNECT_PENDING) dp->hpd_state = ST_DISCONNECTED; - }
mutex_unlock(&dp->event_mutex);
@@ -1272,7 +1268,12 @@ static int dp_pm_resume(struct device *dev)
status = dp_catalog_link_is_connected(dp->catalog);
- if (status) + /* + * can not declared display is connected unless + * HDMI cable is plugged in and sink_count of + * dongle become 1 + */ + if (status && dp->link->sink_count) dp->dp_display.is_connected = true; else dp->dp_display.is_connected = false;