On Wed, 30 Mar 2022 at 19:04, Sankeerth Billakanti quic_sbillaka@quicinc.com wrote:
The panel-edp driver modes needs to be validated differently from DP because the link capabilities are not available for EDP by that time.
Signed-off-by: Sankeerth Billakanti quic_sbillaka@quicinc.com
This should not be necessary after https://patchwork.freedesktop.org/patch/479261/?series=101682&rev=1. Could you please check?
drivers/gpu/drm/msm/dp/dp_display.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c index 8bafdd0..f9c7d9a 100644 --- a/drivers/gpu/drm/msm/dp/dp_display.c +++ b/drivers/gpu/drm/msm/dp/dp_display.c @@ -1003,6 +1003,12 @@ enum drm_mode_status dp_bridge_mode_valid(struct drm_bridge *bridge, return -EINVAL; }
if (dp->connector_type == DRM_MODE_CONNECTOR_eDP) {if (mode_pclk_khz > DP_MAX_PIXEL_CLK_KHZ)return MODE_CLOCK_HIGH;return MODE_OK;}if ((dp->max_pclk_khz <= 0) || (dp->max_pclk_khz > DP_MAX_PIXEL_CLK_KHZ) || (mode->clock > dp->max_pclk_khz))-- 2.7.4