On Mon, Jan 28, 2019 at 04:05:34PM -0800, Matthias Kaehlcke wrote:
Hi,
this series has gone through multiple rounds of review and there are no outstanding comments. It seems it should be ready to land, or is there anything left that needs to be addressed?
From the drm side, I think we'll need Andy to pick up the dt-bindings
and dts changes, and then the msm/dsi changes can be picked once that's merged. We could also do a topic branch if that suits everyone.
Sean
Thanks
Matthias
On Wed, Dec 19, 2018 at 03:55:20PM -0800, Matthias Kaehlcke wrote:
The MSM DSI PHY drivers currently hardcode the name and the rate of the PHY ref clock. Get the ref clock from the device tree instead.
Note: testing of this series was limited to SDM845 and the 10nm PHY
Major changes in v5:
- none (see per-patch change log for minor changes)
Major changes in v4:
- always use parent rate for 28nm and 28nm 8960 PHYs
Major changes in v3:
- keep supporting DTs without ref clock for the 28nm and the 28nm 8960 PHYs
- added patch to add ref clock to qcom-apq8064.dtsi
Major changes in v2:
- apply to all MSM DSI PHY drivers, not only 10nm
Matthias Kaehlcke (8): dt-bindings: msm/dsi: Add ref clock for PHYs drm/msm/dsi: 28nm 8960 PHY: Get ref clock from the DT drm/msm/dsi: 28nm PHY: Get ref clock from the DT drm/msm/dsi: 14nm PHY: Get ref clock from the DT drm/msm/dsi: 10nm PHY: Get ref clock from the DT arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs ARM: dts: qcom-apq8064: Set 'xo_board' as ref clock of the DSI PHY
.../devicetree/bindings/display/msm/dsi.txt | 1 + arch/arm/boot/dts/qcom-apq8064.dtsi | 5 +-- arch/arm64/boot/dts/qcom/msm8916.dtsi | 5 +-- arch/arm64/boot/dts/qcom/sdm845.dtsi | 10 +++--- drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 20 +++++++++-- drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c | 23 +++++++++--- drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c | 36 +++++++++++++------ .../gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c | 24 ++++++++++--- 8 files changed, 92 insertions(+), 32 deletions(-)