Re: [PATCH 6/9] drm/i915/psr: Check if source supports sink specific SU granularity

On Mon, Nov 26, 2018 at 04:37:07PM -0800, José Roberto de Souza wrote:

According to eDP spec, sink can required specific selective update granularity that source must comply. Here caching the value if required and checking source supports it.

Cc: Rodrigo Vivi rodrigo.vivi@intel.com Cc: Dhinakaran Pandiyan dhinakaran.pandiyan@intel.com Signed-off-by: José Roberto de Souza jose.souza@intel.com

---

drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_psr.c | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 33 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index f763b30f98d9..cbcd85af95bf 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -506,6 +506,7 @@ struct i915_psr { ktime_t last_exit; bool sink_not_reliable; bool irq_aux_error;

• u16 su_x_granularity;

};

enum intel_pch { diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c index 7607a58a6ec0..9215c9052381 100644 --- a/drivers/gpu/drm/i915/intel_psr.c +++ b/drivers/gpu/drm/i915/intel_psr.c @@ -257,6 +257,21 @@ static u8 intel_dp_get_sink_sync_latency(struct intel_dp *intel_dp) return val; }

+static u16 intel_dp_get_su_x_granulartiy(struct intel_dp *intel_dp) +{

• u16 val = 0;
• ssize_t r;
• if (!(intel_dp->psr_dpcd[1] & DP_PSR2_SU_GRANULARITY_REQUIRED))

• return val;
  

• r = drm_dp_dpcd_read(&intel_dp->aux, DP_PSR2_SU_X_GRANULARITY, &val, 2);
• if (r != 2)

• DRM_WARN("Unable to read DP_PSR2_SU_X_GRANULARITY\n");
  

• return val;

+}

void intel_psr_init_dpcd(struct intel_dp *intel_dp) { struct drm_i915_private *dev_priv = @@ -311,6 +326,8 @@ void intel_psr_init_dpcd(struct intel_dp *intel_dp) if (dev_priv->psr.sink_psr2_support) { dev_priv->psr.colorimetry_support = intel_dp_get_colorimetry_status(intel_dp);

• 	dev_priv->psr.su_x_granularity =
  

• 		intel_dp_get_su_x_granulartiy(intel_dp);
  

  } }

} @@ -525,6 +542,21 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp, return false; }

• if (dev_priv->psr.su_x_granularity) {

• /*
  

•  * HW will always send full lines in SU blocks, so X will
  

•  * always be 0 and we only need to check the width to validate
  

•  * horizontal granularity.
  

•  * About vertical granularity HW works by SU blocks starting
  

•  * at each 4 lines with height of 4 lines, what eDP states
  

•  * that sink should support.
  

•  */
  

• if (crtc_hdisplay % dev_priv->psr.su_x_granularity) {
  

• 	DRM_DEBUG_KMS("PSR2 not enabled, HW can not match sink SU granularity requirement\n");
  

• 	return false;
  

I wonder if regardless this bit we still need to do a sort of check anyway because spec states:

" Sets the grid pattern granularity in the X direction. A value of 0 indicates that no X-coordinate granularity requirement exists other than the standard restrictions, wherein the: • Starting X-coordinate must be evenly divisible by 16 • Rectangle width must be evenly divisible by 4 "

Also, why we are just checking X granularity and not Y? (0074h)

(maybe it would be useful to introduce along with previous patch that I had just reviewed)

• }
  

• }
• return true;

}

-- 2.19.2