Hi,
On Wed, Feb 28, 2018 at 01:26:01PM +0200, Tomi Valkeinen wrote:
Add HPD support to the DVI connector driver. The code is almost identical to the HPD code in the HDMI connector driver.
Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com
Reviewed-by: Sebastian Reichel sebastian.reichel@collabora.co.uk
-- Sebastian
drivers/gpu/drm/omapdrm/displays/connector-dvi.c | 118 +++++++++++++++++++++++ 1 file changed, 118 insertions(+)
diff --git a/drivers/gpu/drm/omapdrm/displays/connector-dvi.c b/drivers/gpu/drm/omapdrm/displays/connector-dvi.c index 391d80364346..6d8cbd9e2110 100644 --- a/drivers/gpu/drm/omapdrm/displays/connector-dvi.c +++ b/drivers/gpu/drm/omapdrm/displays/connector-dvi.c @@ -9,6 +9,7 @@
- the Free Software Foundation.
*/
+#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/platform_device.h> @@ -44,6 +45,14 @@ struct panel_drv_data { struct videomode vm;
struct i2c_adapter *i2c_adapter;
- struct gpio_desc *hpd_gpio;
- void (*hpd_cb)(void *cb_data, enum drm_connector_status status);
- void *hpd_cb_data;
- bool hpd_enabled;
- /* mutex for hpd fields above */
- struct mutex hpd_lock;
};
#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev) @@ -189,6 +198,9 @@ static int dvic_read_edid(struct omap_dss_device *dssdev, struct panel_drv_data *ddata = to_panel_data(dssdev); int r, l, bytes_read;
- if (ddata->hpd_gpio && !gpiod_get_value_cansleep(ddata->hpd_gpio))
return -ENODEV;
- if (!ddata->i2c_adapter) return -ENODEV;
@@ -220,6 +232,9 @@ static bool dvic_detect(struct omap_dss_device *dssdev) unsigned char out; int r;
- if (ddata->hpd_gpio)
return gpiod_get_value_cansleep(ddata->hpd_gpio);
- if (!ddata->i2c_adapter) return true;
@@ -228,6 +243,60 @@ static bool dvic_detect(struct omap_dss_device *dssdev) return r == 0; }
+static int dvic_register_hpd_cb(struct omap_dss_device *dssdev,
void (*cb)(void *cb_data,
enum drm_connector_status status),
void *cb_data)
+{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
- if (!ddata->hpd_gpio)
return -ENOTSUPP;
- mutex_lock(&ddata->hpd_lock);
- ddata->hpd_cb = cb;
- ddata->hpd_cb_data = cb_data;
- mutex_unlock(&ddata->hpd_lock);
- return 0;
+}
+static void dvic_unregister_hpd_cb(struct omap_dss_device *dssdev) +{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
- if (!ddata->hpd_gpio)
return;
- mutex_lock(&ddata->hpd_lock);
- ddata->hpd_cb = NULL;
- ddata->hpd_cb_data = NULL;
- mutex_unlock(&ddata->hpd_lock);
+}
+static void dvic_enable_hpd(struct omap_dss_device *dssdev) +{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
- if (!ddata->hpd_gpio)
return;
- mutex_lock(&ddata->hpd_lock);
- ddata->hpd_enabled = true;
- mutex_unlock(&ddata->hpd_lock);
+}
+static void dvic_disable_hpd(struct omap_dss_device *dssdev) +{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
- if (!ddata->hpd_gpio)
return;
- mutex_lock(&ddata->hpd_lock);
- ddata->hpd_enabled = false;
- mutex_unlock(&ddata->hpd_lock);
+}
static struct omap_dss_driver dvic_driver = { .connect = dvic_connect, .disconnect = dvic_disconnect, @@ -241,14 +310,60 @@ static struct omap_dss_driver dvic_driver = {
.read_edid = dvic_read_edid, .detect = dvic_detect,
- .register_hpd_cb = dvic_register_hpd_cb,
- .unregister_hpd_cb = dvic_unregister_hpd_cb,
- .enable_hpd = dvic_enable_hpd,
- .disable_hpd = dvic_disable_hpd,
};
+static irqreturn_t dvic_hpd_isr(int irq, void *data) +{
- struct panel_drv_data *ddata = data;
- mutex_lock(&ddata->hpd_lock);
- if (ddata->hpd_enabled && ddata->hpd_cb) {
enum drm_connector_status status;
if (dvic_detect(&ddata->dssdev))
status = connector_status_connected;
else
status = connector_status_disconnected;
ddata->hpd_cb(ddata->hpd_cb_data, status);
- }
- mutex_unlock(&ddata->hpd_lock);
- return IRQ_HANDLED;
+}
static int dvic_probe_of(struct platform_device *pdev) { struct panel_drv_data *ddata = platform_get_drvdata(pdev); struct device_node *node = pdev->dev.of_node; struct device_node *adapter_node; struct i2c_adapter *adapter;
struct gpio_desc *gpio;
int r;
gpio = devm_gpiod_get_optional(&pdev->dev, "hpd", GPIOD_IN);
if (IS_ERR(gpio)) {
dev_err(&pdev->dev, "failed to parse HPD gpio\n");
return PTR_ERR(gpio);
}
ddata->hpd_gpio = gpio;
mutex_init(&ddata->hpd_lock);
if (ddata->hpd_gpio) {
r = devm_request_threaded_irq(&pdev->dev,
gpiod_to_irq(ddata->hpd_gpio), NULL, dvic_hpd_isr,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"DVI HPD", ddata);
if (r)
return r;
}
adapter_node = of_parse_phandle(node, "ddc-i2c-bus", 0); if (adapter_node) {
@@ -300,6 +415,7 @@ static int dvic_probe(struct platform_device *pdev)
err_reg: i2c_put_adapter(ddata->i2c_adapter);
mutex_destroy(&ddata->hpd_lock);
return r;
} @@ -316,6 +432,8 @@ static int __exit dvic_remove(struct platform_device *pdev)
i2c_put_adapter(ddata->i2c_adapter);
- mutex_destroy(&ddata->hpd_lock);
- return 0;
}
-- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel