Just a very minimal patch to nuke that code. Lots of the flip interrupt handling stuff is still around.
Cc: Maarten Lankhorst maarten.lankhorst@linux.intel.com Cc: Ville Syrjälä ville.syrjala@linux.intel.com Signed-off-by: Daniel Vetter daniel.vetter@intel.com --- drivers/gpu/drm/i915/i915_drv.h | 5 - drivers/gpu/drm/i915/intel_display.c | 656 ----------------------------------- 2 files changed, 661 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index f66c78d3a0a2..07e98b07c5bc 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -715,11 +715,6 @@ struct drm_i915_display_funcs { void (*fdi_link_train)(struct intel_crtc *crtc, const struct intel_crtc_state *crtc_state); void (*init_clock_gating)(struct drm_i915_private *dev_priv); - int (*queue_flip)(struct drm_device *dev, struct drm_crtc *crtc, - struct drm_framebuffer *fb, - struct drm_i915_gem_object *obj, - struct drm_i915_gem_request *req, - uint32_t flags); void (*hpd_irq_setup)(struct drm_i915_private *dev_priv); /* clock updates for mode set */ /* cursor updates */ diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 74b0ea1badc3..3349ca947173 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2664,20 +2664,6 @@ intel_alloc_initial_plane_obj(struct intel_crtc *crtc, return false; }
-/* Update plane->state->fb to match plane->fb after driver-internal updates */ -static void -update_state_fb(struct drm_plane *plane) -{ - if (plane->fb == plane->state->fb) - return; - - if (plane->state->fb) - drm_framebuffer_unreference(plane->state->fb); - plane->state->fb = plane->fb; - if (plane->state->fb) - drm_framebuffer_reference(plane->state->fb); -} - static void intel_set_plane_visible(struct intel_crtc_state *crtc_state, struct intel_plane_state *plane_state, @@ -10163,35 +10149,6 @@ static void intel_crtc_destroy(struct drm_crtc *crtc) kfree(intel_crtc); }
-static void intel_unpin_work_fn(struct work_struct *__work) -{ - struct intel_flip_work *work = - container_of(__work, struct intel_flip_work, unpin_work); - struct intel_crtc *crtc = to_intel_crtc(work->crtc); - struct drm_device *dev = crtc->base.dev; - struct drm_plane *primary = crtc->base.primary; - - if (is_mmio_work(work)) - flush_work(&work->mmio_work); - - mutex_lock(&dev->struct_mutex); - intel_unpin_fb_vma(work->old_vma); - i915_gem_object_put(work->pending_flip_obj); - mutex_unlock(&dev->struct_mutex); - - i915_gem_request_put(work->flip_queued_req); - - intel_frontbuffer_flip_complete(to_i915(dev), - to_intel_plane(primary)->frontbuffer_bit); - intel_fbc_post_update(crtc); - drm_framebuffer_unreference(work->old_fb); - - BUG_ON(atomic_read(&crtc->unpin_work_count) == 0); - atomic_dec(&crtc->unpin_work_count); - - kfree(work); -} - /* Is 'a' after or equal to 'b'? */ static bool g4x_flip_count_after_eq(u32 a, u32 b) { @@ -10336,346 +10293,6 @@ static inline void intel_mark_page_flip_active(struct intel_crtc *crtc, atomic_set(&work->pending, 1); }
-static int intel_gen2_queue_flip(struct drm_device *dev, - struct drm_crtc *crtc, - struct drm_framebuffer *fb, - struct drm_i915_gem_object *obj, - struct drm_i915_gem_request *req, - uint32_t flags) -{ - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - u32 flip_mask, *cs; - - cs = intel_ring_begin(req, 6); - if (IS_ERR(cs)) - return PTR_ERR(cs); - - /* Can't queue multiple flips, so wait for the previous - * one to finish before executing the next. - */ - if (intel_crtc->plane) - flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; - else - flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; - *cs++ = MI_WAIT_FOR_EVENT | flip_mask; - *cs++ = MI_NOOP; - *cs++ = MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane); - *cs++ = fb->pitches[0]; - *cs++ = intel_crtc->flip_work->gtt_offset; - *cs++ = 0; /* aux display base address, unused */ - - return 0; -} - -static int intel_gen3_queue_flip(struct drm_device *dev, - struct drm_crtc *crtc, - struct drm_framebuffer *fb, - struct drm_i915_gem_object *obj, - struct drm_i915_gem_request *req, - uint32_t flags) -{ - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - u32 flip_mask, *cs; - - cs = intel_ring_begin(req, 6); - if (IS_ERR(cs)) - return PTR_ERR(cs); - - if (intel_crtc->plane) - flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; - else - flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; - *cs++ = MI_WAIT_FOR_EVENT | flip_mask; - *cs++ = MI_NOOP; - *cs++ = MI_DISPLAY_FLIP_I915 | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane); - *cs++ = fb->pitches[0]; - *cs++ = intel_crtc->flip_work->gtt_offset; - *cs++ = MI_NOOP; - - return 0; -} - -static int intel_gen4_queue_flip(struct drm_device *dev, - struct drm_crtc *crtc, - struct drm_framebuffer *fb, - struct drm_i915_gem_object *obj, - struct drm_i915_gem_request *req, - uint32_t flags) -{ - struct drm_i915_private *dev_priv = to_i915(dev); - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - u32 pf, pipesrc, *cs; - - cs = intel_ring_begin(req, 4); - if (IS_ERR(cs)) - return PTR_ERR(cs); - - /* i965+ uses the linear or tiled offsets from the - * Display Registers (which do not change across a page-flip) - * so we need only reprogram the base address. - */ - *cs++ = MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane); - *cs++ = fb->pitches[0]; - *cs++ = intel_crtc->flip_work->gtt_offset | - intel_fb_modifier_to_tiling(fb->modifier); - - /* XXX Enabling the panel-fitter across page-flip is so far - * untested on non-native modes, so ignore it for now. - * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE; - */ - pf = 0; - pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff; - *cs++ = pf | pipesrc; - - return 0; -} - -static int intel_gen6_queue_flip(struct drm_device *dev, - struct drm_crtc *crtc, - struct drm_framebuffer *fb, - struct drm_i915_gem_object *obj, - struct drm_i915_gem_request *req, - uint32_t flags) -{ - struct drm_i915_private *dev_priv = to_i915(dev); - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - u32 pf, pipesrc, *cs; - - cs = intel_ring_begin(req, 4); - if (IS_ERR(cs)) - return PTR_ERR(cs); - - *cs++ = MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane); - *cs++ = fb->pitches[0] | intel_fb_modifier_to_tiling(fb->modifier); - *cs++ = intel_crtc->flip_work->gtt_offset; - - /* Contrary to the suggestions in the documentation, - * "Enable Panel Fitter" does not seem to be required when page - * flipping with a non-native mode, and worse causes a normal - * modeset to fail. - * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE; - */ - pf = 0; - pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff; - *cs++ = pf | pipesrc; - - return 0; -} - -static int intel_gen7_queue_flip(struct drm_device *dev, - struct drm_crtc *crtc, - struct drm_framebuffer *fb, - struct drm_i915_gem_object *obj, - struct drm_i915_gem_request *req, - uint32_t flags) -{ - struct drm_i915_private *dev_priv = to_i915(dev); - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - u32 *cs, plane_bit = 0; - int len, ret; - - switch (intel_crtc->plane) { - case PLANE_A: - plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A; - break; - case PLANE_B: - plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B; - break; - case PLANE_C: - plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C; - break; - default: - WARN_ONCE(1, "unknown plane in flip command\n"); - return -ENODEV; - } - - len = 4; - if (req->engine->id == RCS) { - len += 6; - /* - * On Gen 8, SRM is now taking an extra dword to accommodate - * 48bits addresses, and we need a NOOP for the batch size to - * stay even. - */ - if (IS_GEN8(dev_priv)) - len += 2; - } - - /* - * BSpec MI_DISPLAY_FLIP for IVB: - * "The full packet must be contained within the same cache line." - * - * Currently the LRI+SRM+MI_DISPLAY_FLIP all fit within the same - * cacheline, if we ever start emitting more commands before - * the MI_DISPLAY_FLIP we may need to first emit everything else, - * then do the cacheline alignment, and finally emit the - * MI_DISPLAY_FLIP. - */ - ret = intel_ring_cacheline_align(req); - if (ret) - return ret; - - cs = intel_ring_begin(req, len); - if (IS_ERR(cs)) - return PTR_ERR(cs); - - /* Unmask the flip-done completion message. Note that the bspec says that - * we should do this for both the BCS and RCS, and that we must not unmask - * more than one flip event at any time (or ensure that one flip message - * can be sent by waiting for flip-done prior to queueing new flips). - * Experimentation says that BCS works despite DERRMR masking all - * flip-done completion events and that unmasking all planes at once - * for the RCS also doesn't appear to drop events. Setting the DERRMR - * to zero does lead to lockups within MI_DISPLAY_FLIP. - */ - if (req->engine->id == RCS) { - *cs++ = MI_LOAD_REGISTER_IMM(1); - *cs++ = i915_mmio_reg_offset(DERRMR); - *cs++ = ~(DERRMR_PIPEA_PRI_FLIP_DONE | - DERRMR_PIPEB_PRI_FLIP_DONE | - DERRMR_PIPEC_PRI_FLIP_DONE); - if (IS_GEN8(dev_priv)) - *cs++ = MI_STORE_REGISTER_MEM_GEN8 | - MI_SRM_LRM_GLOBAL_GTT; - else - *cs++ = MI_STORE_REGISTER_MEM | MI_SRM_LRM_GLOBAL_GTT; - *cs++ = i915_mmio_reg_offset(DERRMR); - *cs++ = i915_ggtt_offset(req->engine->scratch) + 256; - if (IS_GEN8(dev_priv)) { - *cs++ = 0; - *cs++ = MI_NOOP; - } - } - - *cs++ = MI_DISPLAY_FLIP_I915 | plane_bit; - *cs++ = fb->pitches[0] | intel_fb_modifier_to_tiling(fb->modifier); - *cs++ = intel_crtc->flip_work->gtt_offset; - *cs++ = MI_NOOP; - - return 0; -} - -static bool use_mmio_flip(struct intel_engine_cs *engine, - struct drm_i915_gem_object *obj) -{ - /* - * This is not being used for older platforms, because - * non-availability of flip done interrupt forces us to use - * CS flips. Older platforms derive flip done using some clever - * tricks involving the flip_pending status bits and vblank irqs. - * So using MMIO flips there would disrupt this mechanism. - */ - - if (engine == NULL) - return true; - - if (INTEL_GEN(engine->i915) < 5) - return false; - - if (i915.use_mmio_flip < 0) - return false; - else if (i915.use_mmio_flip > 0) - return true; - else if (i915.enable_execlists) - return true; - - return engine != i915_gem_object_last_write_engine(obj); -} - -static void skl_do_mmio_flip(struct intel_crtc *intel_crtc, - unsigned int rotation, - struct intel_flip_work *work) -{ - struct drm_device *dev = intel_crtc->base.dev; - struct drm_i915_private *dev_priv = to_i915(dev); - struct drm_framebuffer *fb = intel_crtc->base.primary->fb; - const enum pipe pipe = intel_crtc->pipe; - u32 ctl, stride = skl_plane_stride(fb, 0, rotation); - - ctl = I915_READ(PLANE_CTL(pipe, 0)); - ctl &= ~PLANE_CTL_TILED_MASK; - switch (fb->modifier) { - case DRM_FORMAT_MOD_LINEAR: - break; - case I915_FORMAT_MOD_X_TILED: - ctl |= PLANE_CTL_TILED_X; - break; - case I915_FORMAT_MOD_Y_TILED: - ctl |= PLANE_CTL_TILED_Y; - break; - case I915_FORMAT_MOD_Yf_TILED: - ctl |= PLANE_CTL_TILED_YF; - break; - default: - MISSING_CASE(fb->modifier); - } - - /* - * Both PLANE_CTL and PLANE_STRIDE are not updated on vblank but on - * PLANE_SURF updates, the update is then guaranteed to be atomic. - */ - I915_WRITE(PLANE_CTL(pipe, 0), ctl); - I915_WRITE(PLANE_STRIDE(pipe, 0), stride); - - I915_WRITE(PLANE_SURF(pipe, 0), work->gtt_offset); - POSTING_READ(PLANE_SURF(pipe, 0)); -} - -static void ilk_do_mmio_flip(struct intel_crtc *intel_crtc, - struct intel_flip_work *work) -{ - struct drm_device *dev = intel_crtc->base.dev; - struct drm_i915_private *dev_priv = to_i915(dev); - struct drm_framebuffer *fb = intel_crtc->base.primary->fb; - i915_reg_t reg = DSPCNTR(intel_crtc->plane); - u32 dspcntr; - - dspcntr = I915_READ(reg); - - if (fb->modifier == I915_FORMAT_MOD_X_TILED) - dspcntr |= DISPPLANE_TILED; - else - dspcntr &= ~DISPPLANE_TILED; - - I915_WRITE(reg, dspcntr); - - I915_WRITE(DSPSURF(intel_crtc->plane), work->gtt_offset); - POSTING_READ(DSPSURF(intel_crtc->plane)); -} - -static void intel_mmio_flip_work_func(struct work_struct *w) -{ - struct intel_flip_work *work = - container_of(w, struct intel_flip_work, mmio_work); - struct intel_crtc *crtc = to_intel_crtc(work->crtc); - struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); - struct intel_framebuffer *intel_fb = - to_intel_framebuffer(crtc->base.primary->fb); - struct drm_i915_gem_object *obj = intel_fb->obj; - - WARN_ON(i915_gem_object_wait(obj, 0, MAX_SCHEDULE_TIMEOUT, NULL) < 0); - - intel_pipe_update_start(crtc); - - if (INTEL_GEN(dev_priv) >= 9) - skl_do_mmio_flip(crtc, work->rotation, work); - else - /* use_mmio_flip() retricts MMIO flips to ilk+ */ - ilk_do_mmio_flip(crtc, work); - - intel_pipe_update_end(crtc, work); -} - -static int intel_default_queue_flip(struct drm_device *dev, - struct drm_crtc *crtc, - struct drm_framebuffer *fb, - struct drm_i915_gem_object *obj, - struct drm_i915_gem_request *req, - uint32_t flags) -{ - return -ENODEV; -} - static bool __pageflip_stall_check_cs(struct drm_i915_private *dev_priv, struct intel_crtc *intel_crtc, struct intel_flip_work *work) @@ -10742,251 +10359,6 @@ void intel_check_page_flip(struct drm_i915_private *dev_priv, int pipe) spin_unlock(&dev->event_lock); }
-__maybe_unused -static int intel_crtc_page_flip(struct drm_crtc *crtc, - struct drm_framebuffer *fb, - struct drm_pending_vblank_event *event, - uint32_t page_flip_flags) -{ - struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = to_i915(dev); - struct drm_framebuffer *old_fb = crtc->primary->fb; - struct drm_i915_gem_object *obj = intel_fb_obj(fb); - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - struct drm_plane *primary = crtc->primary; - enum pipe pipe = intel_crtc->pipe; - struct intel_flip_work *work; - struct intel_engine_cs *engine; - bool mmio_flip; - struct drm_i915_gem_request *request; - struct i915_vma *vma; - int ret; - - /* - * drm_mode_page_flip_ioctl() should already catch this, but double - * check to be safe. In the future we may enable pageflipping from - * a disabled primary plane. - */ - if (WARN_ON(intel_fb_obj(old_fb) == NULL)) - return -EBUSY; - - /* Can't change pixel format via MI display flips. */ - if (fb->format != crtc->primary->fb->format) - return -EINVAL; - - /* - * TILEOFF/LINOFF registers can't be changed via MI display flips. - * Note that pitch changes could also affect these register. - */ - if (INTEL_GEN(dev_priv) > 3 && - (fb->offsets[0] != crtc->primary->fb->offsets[0] || - fb->pitches[0] != crtc->primary->fb->pitches[0])) - return -EINVAL; - - if (i915_terminally_wedged(&dev_priv->gpu_error)) - goto out_hang; - - work = kzalloc(sizeof(*work), GFP_KERNEL); - if (work == NULL) - return -ENOMEM; - - work->event = event; - work->crtc = crtc; - work->old_fb = old_fb; - INIT_WORK(&work->unpin_work, intel_unpin_work_fn); - - ret = drm_crtc_vblank_get(crtc); - if (ret) - goto free_work; - - /* We borrow the event spin lock for protecting flip_work */ - spin_lock_irq(&dev->event_lock); - if (intel_crtc->flip_work) { - /* Before declaring the flip queue wedged, check if - * the hardware completed the operation behind our backs. - */ - if (pageflip_finished(intel_crtc, intel_crtc->flip_work)) { - DRM_DEBUG_DRIVER("flip queue: previous flip completed, continuing\n"); - page_flip_completed(intel_crtc); - } else { - DRM_DEBUG_DRIVER("flip queue: crtc already busy\n"); - spin_unlock_irq(&dev->event_lock); - - drm_crtc_vblank_put(crtc); - kfree(work); - return -EBUSY; - } - } - intel_crtc->flip_work = work; - spin_unlock_irq(&dev->event_lock); - - if (atomic_read(&intel_crtc->unpin_work_count) >= 2) - flush_workqueue(dev_priv->wq); - - /* Reference the objects for the scheduled work. */ - drm_framebuffer_reference(work->old_fb); - - crtc->primary->fb = fb; - update_state_fb(crtc->primary); - - work->pending_flip_obj = i915_gem_object_get(obj); - - ret = i915_mutex_lock_interruptible(dev); - if (ret) - goto cleanup; - - intel_crtc->reset_count = i915_reset_count(&dev_priv->gpu_error); - if (i915_reset_backoff_or_wedged(&dev_priv->gpu_error)) { - ret = -EIO; - goto unlock; - } - - atomic_inc(&intel_crtc->unpin_work_count); - - if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv)) - work->flip_count = I915_READ(PIPE_FLIPCOUNT_G4X(pipe)) + 1; - - if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { - engine = dev_priv->engine[BCS]; - if (fb->modifier != old_fb->modifier) - /* vlv: DISPLAY_FLIP fails to change tiling */ - engine = NULL; - } else if (IS_IVYBRIDGE(dev_priv) || IS_HASWELL(dev_priv)) { - engine = dev_priv->engine[BCS]; - } else if (INTEL_GEN(dev_priv) >= 7) { - engine = i915_gem_object_last_write_engine(obj); - if (engine == NULL || engine->id != RCS) - engine = dev_priv->engine[BCS]; - } else { - engine = dev_priv->engine[RCS]; - } - - mmio_flip = use_mmio_flip(engine, obj); - - vma = intel_pin_and_fence_fb_obj(fb, primary->state->rotation); - if (IS_ERR(vma)) { - ret = PTR_ERR(vma); - goto cleanup_pending; - } - - work->old_vma = to_intel_plane_state(primary->state)->vma; - to_intel_plane_state(primary->state)->vma = vma; - - work->gtt_offset = i915_ggtt_offset(vma) + intel_crtc->dspaddr_offset; - work->rotation = crtc->primary->state->rotation; - - /* - * There's the potential that the next frame will not be compatible with - * FBC, so we want to call pre_update() before the actual page flip. - * The problem is that pre_update() caches some information about the fb - * object, so we want to do this only after the object is pinned. Let's - * be on the safe side and do this immediately before scheduling the - * flip. - */ - intel_fbc_pre_update(intel_crtc, intel_crtc->config, - to_intel_plane_state(primary->state)); - - if (mmio_flip) { - INIT_WORK(&work->mmio_work, intel_mmio_flip_work_func); - queue_work(system_unbound_wq, &work->mmio_work); - } else { - request = i915_gem_request_alloc(engine, - dev_priv->kernel_context); - if (IS_ERR(request)) { - ret = PTR_ERR(request); - goto cleanup_unpin; - } - - ret = i915_gem_request_await_object(request, obj, false); - if (ret) - goto cleanup_request; - - ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, request, - page_flip_flags); - if (ret) - goto cleanup_request; - - intel_mark_page_flip_active(intel_crtc, work); - - work->flip_queued_req = i915_gem_request_get(request); - i915_add_request(request); - } - - i915_gem_object_wait_priority(obj, 0, I915_PRIORITY_DISPLAY); - i915_gem_track_fb(intel_fb_obj(old_fb), obj, - to_intel_plane(primary)->frontbuffer_bit); - mutex_unlock(&dev->struct_mutex); - - intel_frontbuffer_flip_prepare(to_i915(dev), - to_intel_plane(primary)->frontbuffer_bit); - - trace_i915_flip_request(intel_crtc->plane, obj); - - return 0; - -cleanup_request: - i915_add_request(request); -cleanup_unpin: - to_intel_plane_state(primary->state)->vma = work->old_vma; - intel_unpin_fb_vma(vma); -cleanup_pending: - atomic_dec(&intel_crtc->unpin_work_count); -unlock: - mutex_unlock(&dev->struct_mutex); -cleanup: - crtc->primary->fb = old_fb; - update_state_fb(crtc->primary); - - i915_gem_object_put(obj); - drm_framebuffer_unreference(work->old_fb); - - spin_lock_irq(&dev->event_lock); - intel_crtc->flip_work = NULL; - spin_unlock_irq(&dev->event_lock); - - drm_crtc_vblank_put(crtc); -free_work: - kfree(work); - - if (ret == -EIO) { - struct drm_atomic_state *state; - struct drm_plane_state *plane_state; - -out_hang: - state = drm_atomic_state_alloc(dev); - if (!state) - return -ENOMEM; - state->acquire_ctx = dev->mode_config.acquire_ctx; - -retry: - plane_state = drm_atomic_get_plane_state(state, primary); - ret = PTR_ERR_OR_ZERO(plane_state); - if (!ret) { - drm_atomic_set_fb_for_plane(plane_state, fb); - - ret = drm_atomic_set_crtc_for_plane(plane_state, crtc); - if (!ret) - ret = drm_atomic_commit(state); - } - - if (ret == -EDEADLK) { - drm_modeset_backoff(state->acquire_ctx); - drm_atomic_state_clear(state); - goto retry; - } - - drm_atomic_state_put(state); - - if (ret == 0 && event) { - spin_lock_irq(&dev->event_lock); - drm_crtc_send_vblank_event(crtc, event); - spin_unlock_irq(&dev->event_lock); - } - } - return ret; -} - - /** * intel_wm_need_update - Check whether watermarks need updating * @plane: drm plane @@ -14736,34 +14108,6 @@ void intel_init_display_hooks(struct drm_i915_private *dev_priv) dev_priv->display.update_crtcs = skl_update_crtcs; else dev_priv->display.update_crtcs = intel_update_crtcs; - - switch (INTEL_INFO(dev_priv)->gen) { - case 2: - dev_priv->display.queue_flip = intel_gen2_queue_flip; - break; - - case 3: - dev_priv->display.queue_flip = intel_gen3_queue_flip; - break; - - case 4: - case 5: - dev_priv->display.queue_flip = intel_gen4_queue_flip; - break; - - case 6: - dev_priv->display.queue_flip = intel_gen6_queue_flip; - break; - case 7: - case 8: /* FIXME(BDW): Check that the gen8 RCS flip works. */ - dev_priv->display.queue_flip = intel_gen7_queue_flip; - break; - case 9: - /* Drop through - unsupported since execlist only. */ - default: - /* Default just returns -ENODEV to indicate unsupported */ - dev_priv->display.queue_flip = intel_default_queue_flip; - } }
/*